Author Topic: [Order] TX60/TX65/TX84se [Finished]  (Read 99326 times)

Perfex and 5 Guests are viewing this topic.

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #850 on: Sun, 27 January 2019, 23:27:17 »

Offline nug

  • Posts: 42
  • Location: Melbourne
Re: [Order] TX60/TX65/TX84se
« Reply #851 on: Sun, 27 January 2019, 23:31:39 »
https://goo.gl/forms/WHjr08vAI3KoUuI02

extra preorder form

That link leads to an old closed form

edit: it's been fixed now
« Last Edit: Sun, 27 January 2019, 23:39:06 by nug »

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #852 on: Sun, 27 January 2019, 23:38:34 »
https://goo.gl/forms/WHjr08vAI3KoUuI02

extra preorder form

That link leads to an old closed form

sorry, I fixed it, plz open it again.

Offline razor_blade

  • Posts: 104
Re: [Order] TX60/TX65/TX84se
« Reply #853 on: Sun, 27 January 2019, 23:44:54 »
Filled out! Thanks Kin and Popcorn!

I messed up typing my geekhack username. Can I get it corrected on the form from "Razot!_blade" to "razor_blade"? Not sure if that's a big deal or not. This is why I should never fill out gb forms on my cell phone.
« Last Edit: Sun, 27 January 2019, 23:54:17 by razor_blade »

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #854 on: Mon, 28 January 2019, 01:05:22 »
Filled out! Thanks Kin and Popcorn!

I messed up typing my geekhack username. Can I get it corrected on the form from "Razot!_blade" to "razor_blade"? Not sure if that's a big deal or not. This is why I should never fill out gb forms on my cell phone.
No problem.
It is not important.

Offline qq

  • Posts: 41
  • Location: Melbourne, Australia
  • A daydreamer of possibilities
Re: [Order] TX60/TX65/TX84se
« Reply #855 on: Mon, 28 January 2019, 05:36:01 »
Looks like Australia is one of the first to receive this time. Confirmed that I received the refund of difference. The shipping cost, thanks to phatty and kin, is significantly cheaper than I expected.

I am still waiting for stabs and other parts to be able to assemble this board. Just too curious too see how Space Cadet will be like on this



Off topic: very nice set, Oblotzky.

Offline Rumblehotep

  • Posts: 369
Re: [Order] TX60/TX65/TX84se
« Reply #856 on: Mon, 28 January 2019, 11:05:28 »
Looks like Australia is one of the first to receive this time. Confirmed that I received the refund of difference. The shipping cost, thanks to phatty and kin, is significantly cheaper than I expected.

I am still waiting for stabs and other parts to be able to assemble this board. Just too curious too see how Space Cadet will be like on this

Show Image


Off topic: very nice set, Oblotzky.
heirloom hhkb I love it

Offline appaboy

  • Posts: 153
Re: [Order] TX60/TX65/TX84se
« Reply #857 on: Mon, 28 January 2019, 11:08:11 »
Looks like Australia is one of the first to receive this time. Confirmed that I received the refund of difference. The shipping cost, thanks to phatty and kin, is significantly cheaper than I expected.

I am still waiting for stabs and other parts to be able to assemble this board. Just too curious too see how Space Cadet will be like on this

Show Image


Off topic: very nice set, Oblotzky.

OH my God that looks amazing, even better than I first thought when joining for a tkl. Now I'm even more excited to receive mine one day!
PC Singa, MIR80, TX84se, g80-3314, g80-0427, g80-5000 + 5700, G80-3700, g81-3000 HBU (og wob)

HASRO keycaps
OG POM keycaps
SAI OG Italian dyesubs
Scarface Fn blank

Offline Hutch

  • Posts: 12
Re: [Order] TX60/TX65/TX84se
« Reply #858 on: Mon, 28 January 2019, 11:09:38 »
https://goo.gl/forms/WHjr08vAI3KoUuI02

extra preorder form

That link leads to an old closed form

sorry, I fixed it, plz open it again.


tx108se grey wk ordered! Thanks!

Any chance of a non-antique tx84se?

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #859 on: Mon, 28 January 2019, 12:03:55 »
https://goo.gl/forms/WHjr08vAI3KoUuI02

extra preorder form

That link leads to an old closed form

sorry, I fixed it, plz open it again.


tx108se grey wk ordered! Thanks!

Any chance of a non-antique tx84se?


Thank you.

No extra anodized tx84se.

Offline regionfree

  • Posts: 237
  • Location: Sa kagubatan
Re: [Order] TX60/TX65/TX84se
« Reply #860 on: Tue, 29 January 2019, 05:02:19 »
Please bring back the non-antique tx84se!!!

Offline Rumblehotep

  • Posts: 369
Re: [Order] TX60/TX65/TX84se
« Reply #861 on: Tue, 29 January 2019, 20:30:08 »
Since this might be the last run of antique, ordering  a copper txpad to complement my lz iron

Offline Emir

  • Posts: 443
  • Location: Linköping, Sweden
  • Bandit
    • NordicHardware Keyboard Guide
Re: [Order] TX60/TX65/TX84se
« Reply #862 on: Wed, 30 January 2019, 06:00:32 »
I'm more afraid of Wodan being the proxy, afaik he is a stand up citizen and will declare the full value upon the boards being imported. I have 1200 USD worth of boards, that will be way more than the 200usd shipping...

Offline Photoelectric

  • * Administrator
  • Posts: 6742
Re: [Order] TX60/TX65/TX84se
« Reply #863 on: Wed, 30 January 2019, 14:38:42 »
@kin25, do you think you might have more TX84 "classic" available in Antique Copper finish?  Even B-stock.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a  ||  To be built: MIRA SE, E8-V1, MOON TKL
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #864 on: Wed, 30 January 2019, 19:19:34 »
@kin25, do you think you might have more TX84 "classic" available in Antique Copper finish?  Even B-stock.

No extra tx84

Offline mrhaas

  • Posts: 0
Re: [Order] TX60/TX65/TX84se
« Reply #865 on: Thu, 31 January 2019, 04:09:12 »
@Kin25 I missed champagne gold tx60, can it be reopened?

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #866 on: Thu, 31 January 2019, 07:04:36 »
@Kin25 I missed champagne gold tx60, can it be reopened?

Sorry, I made all extras to antique.

Offline mrhaas

  • Posts: 0
Re: [Order] TX60/TX65/TX84se
« Reply #867 on: Thu, 31 January 2019, 08:36:00 »
@Kin25 I missed champagne gold tx60, can it be reopened?

Sorry, I made all extras to antique.

no i mean , the next round? Whether it can be sold back ?

I can wait because I love it

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #868 on: Thu, 31 January 2019, 10:50:19 »
@Kin25 I missed champagne gold tx60, can it be reopened?

Sorry, I made all extras to antique.

no i mean , the next round? Whether it can be sold back ?

I can wait because I love it

No more round.

I don't have any plan of 60% now.

Offline appaboy

  • Posts: 153
Re: [Order] TX60/TX65/TX84se
« Reply #869 on: Thu, 31 January 2019, 11:55:59 »
sad,
PC Singa, MIR80, TX84se, g80-3314, g80-0427, g80-5000 + 5700, G80-3700, g81-3000 HBU (og wob)

HASRO keycaps
OG POM keycaps
SAI OG Italian dyesubs
Scarface Fn blank

Offline p1xelHer0

  • Posts: 8
  • Location: Stockholm
Re: [Order] TX60/TX65/TX84se
« Reply #870 on: Fri, 01 February 2019, 13:00:51 »
hi,

would it be possible to add an extra 60 plate to my current order? (brass HHKB, invoice paid) thanks!

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #871 on: Fri, 01 February 2019, 21:33:08 »
hi,

would it be possible to add an extra 60 plate to my current order? (brass HHKB, invoice paid) thanks!

hi,

would it be possible to add an extra 60 plate to my current order? (brass HHKB, invoice paid) thanks!

I added 60 plate in the list, and sent an invoice.

Offline bengine

  • Posts: 70
Re: [Order] TX60/TX65/TX84se
« Reply #872 on: Fri, 01 February 2019, 21:40:20 »
Hi Kin,

Can I pre-order the 60% plate & bag? I already have tx60.

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #873 on: Fri, 01 February 2019, 22:07:46 »
Hi Kin,

Can I pre-order the 60% plate & bag? I already have tx60.

Sure.

Offline bengine

  • Posts: 70
Re: [Order] TX60/TX65/TX84se
« Reply #874 on: Fri, 01 February 2019, 23:50:48 »
Hi Kin,

Can I pre-order the 60% plate & bag? I already have tx60.

Sure.

Submitted. Thanks.

Online pixelpusher

  • Posts: 2863
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #875 on: Sat, 02 February 2019, 19:10:09 »
@kin25, do you think you might have more TX84 "classic" available in Antique Copper finish?  Even B-stock.

Here’s one in antique brass
https://www.reddit.com/r/mechmarket/comments/ambzun/krh_dc2014_kmac_12_trik_se_11_pcb_gmk_rgbyk_sa/?st=JRO7K8D1&sh=cb99fdcc
:)

Offline LazerCat

  • Posts: 17
  • Location: Austria
Re: [Order] TX60/TX65/TX84se
« Reply #876 on: Sun, 03 February 2019, 01:02:50 »
@kin25, do you think you might have more TX84 "classic" available in Antique Copper finish?  Even B-stock.

Here’s one in antique brass
https://www.reddit.com/r/mechmarket/comments/ambzun/krh_dc2014_kmac_12_trik_se_11_pcb_gmk_rgbyk_sa/?st=JRO7K8D1&sh=cb99fdcc
That looks quite different from the ones I've seen which had more of a shiny brushed finish. I guess it's a batch thing.

Sent from my SM-N950F using Tapatalk


Offline appaboy

  • Posts: 153
Re: [Order] TX60/TX65/TX84se
« Reply #877 on: Sun, 03 February 2019, 08:48:21 »
have american or europe proxies gotten anything yet
PC Singa, MIR80, TX84se, g80-3314, g80-0427, g80-5000 + 5700, G80-3700, g81-3000 HBU (og wob)

HASRO keycaps
OG POM keycaps
SAI OG Italian dyesubs
Scarface Fn blank

Offline Photoelectric

  • * Administrator
  • Posts: 6742
Re: [Order] TX60/TX65/TX84se
« Reply #878 on: Sun, 03 February 2019, 08:57:59 »
@kin25, do you think you might have more TX84 "classic" available in Antique Copper finish?  Even B-stock.

Here’s one in antique brass
https://www.reddit.com/r/mechmarket/comments/ambzun/krh_dc2014_kmac_12_trik_se_11_pcb_gmk_rgbyk_sa/?st=JRO7K8D1&sh=cb99fdcc

Well, it's priced higher than direct from kin and not antique copper.  I wouldn't mind brass, though that one looks quite dark.
- Keyboards: LZ-GH (Jailhouse Blues)M65-a  ||  To be built: MIRA SE, E8-V1, MOON TKL
- Keyboard Case Painting Tips -
- Join Mechanical Keyboards photography group on Flickr -

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #879 on: Sun, 03 February 2019, 09:06:18 »
have american or europe proxies gotten anything yet

Sorry for late delivery.
They are on the Pacific and Russia.

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #880 on: Sun, 03 February 2019, 09:17:44 »
Top : copper color
Bottom : brass color

Offline Emir

  • Posts: 443
  • Location: Linköping, Sweden
  • Bandit
    • NordicHardware Keyboard Guide
Re: [Order] TX60/TX65/TX84se
« Reply #881 on: Sun, 03 February 2019, 09:44:13 »
Very different antique from the past tx1800v2 antiques:


I like both, can't wait to get my copper version.

@kin25 you mentioned that delivery is expected to be 15th february for europe, is that still true or is it delayed?

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #882 on: Sun, 03 February 2019, 09:48:32 »
Very different antique from the past tx1800v2 antiques:
Show Image


I like both, can't wait to get my copper version.

@kin25 you mentioned that delivery is expected to be 15th february for europe, is that still true or is it delayed?

I can't expect about delivery. But it may be delayed.

Online pixelpusher

  • Posts: 2863
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #883 on: Sun, 03 February 2019, 10:40:50 »
Very different antique from the past tx1800v2 antiques:
Show Image


I like both, can't wait to get my copper version.

@kin25 you mentioned that delivery is expected to be 15th february for europe, is that still true or is it delayed?

Different from those, yes but similar to the photo of the last batch here
https://m.imgur.com/a/9YcpAeD
:)

Offline poolside

  • Posts: 755
  • Location: On the deck
Re: [Order] TX60/TX65/TX84se
« Reply #884 on: Tue, 05 February 2019, 16:38:44 »
https://goo.gl/forms/WHjr08vAI3KoUuI02

extra preorder form

Does the TX-65 PCB support the following bottom row layout: 1.5 1.5 7 (1.5 1.5 1 1 1)? Looking at pictures of the PCB I found online, I would say so, but I am not 100% sure.

Are the Cherry stabilizers offered in the extras order form of the screw-in kind?

Offline kin25

  • Thread Starter
  • Posts: 532
  • Location: SeoSan. Korea.
    • TXKeyboards
Re: [Order] TX60/TX65/TX84se
« Reply #885 on: Wed, 06 February 2019, 19:52:28 »
https://goo.gl/forms/WHjr08vAI3KoUuI02

extra preorder form

Does the TX-65 PCB support the following bottom row layout: 1.5 1.5 7 (1.5 1.5 1 1 1)? Looking at pictures of the PCB I found online, I would say so, but I am not 100% sure.

Are the Cherry stabilizers offered in the extras order form of the screw-in kind?

Not possible wkl layout.

Offline appaboy

  • Posts: 153
Re: [Order] TX60/TX65/TX84se
« Reply #886 on: Thu, 07 February 2019, 12:28:49 »
Very different antique from the past tx1800v2 antiques:
Show Image


I like both, can't wait to get my copper version.

@kin25 you mentioned that delivery is expected to be 15th february for europe, is that still true or is it delayed?

Will diffusers be brass like these on the antiques currently being shipped??
PC Singa, MIR80, TX84se, g80-3314, g80-0427, g80-5000 + 5700, G80-3700, g81-3000 HBU (og wob)

HASRO keycaps
OG POM keycaps
SAI OG Italian dyesubs
Scarface Fn blank

Offline Rumblehotep

  • Posts: 369
Re: [Order] TX60/TX65/TX84se
« Reply #887 on: Thu, 07 February 2019, 12:55:11 »
Will diffusers be brass like these on the antiques currently being shipped??
I think that is only an option for the TX1800v2 "+$40(golden metal gasket)"

Offline appaboy

  • Posts: 153
Re: [Order] TX60/TX65/TX84se
« Reply #888 on: Fri, 08 February 2019, 06:05:00 »
Will diffusers be brass like these on the antiques currently being shipped??
I think that is only an option for the TX1800v2 "+$40(golden metal gasket)"

Alright, thanks
PC Singa, MIR80, TX84se, g80-3314, g80-0427, g80-5000 + 5700, G80-3700, g81-3000 HBU (og wob)

HASRO keycaps
OG POM keycaps
SAI OG Italian dyesubs
Scarface Fn blank

Offline Emir

  • Posts: 443
  • Location: Linköping, Sweden
  • Bandit
    • NordicHardware Keyboard Guide
Re: [Order] TX60/TX65/TX84se
« Reply #889 on: Mon, 11 February 2019, 07:51:41 »
Are boards getting close to arrival at Wodans place for EU antiques? Preliminary date for it to be at my house was 15h Feb by kin, but I guess we have some delays... I just wonder how large delays. :) Have a keyboard meetup in Sweden the 24th I'd love to bring the board to, but it seems that it won't be possible..

Offline appaboy

  • Posts: 153
Re: [Order] TX60/TX65/TX84se
« Reply #890 on: Mon, 11 February 2019, 09:42:50 »
Are boards getting close to arrival at Wodans place for EU antiques? Preliminary date for it to be at my house was 15h Feb by kin, but I guess we have some delays... I just wonder how large delays. :) Have a keyboard meetup in Sweden the 24th I'd love to bring the board to, but it seems that it won't be possible..

Same, I was wanting to bring it to an American meetup but I don't think it's gonna happen before the 23rd
PC Singa, MIR80, TX84se, g80-3314, g80-0427, g80-5000 + 5700, G80-3700, g81-3000 HBU (og wob)

HASRO keycaps
OG POM keycaps
SAI OG Italian dyesubs
Scarface Fn blank

Online pixelpusher

  • Posts: 2863
  • Location: Tennessee - USA
Re: [Order] TX60/TX65/TX84se
« Reply #891 on: Mon, 11 February 2019, 09:46:48 »
Nervous to see the board.  It's funny, but I really don't know what to expect.  I thought we were getting the  brushed look of the ones that were previously posted, but by the looks of other photos floating around (like the two-tone example of the pad posted above and the one for sale on r/mm) this round of boards seem to have a pitted and much darker finish.  Maybe it's just a lighting/camera angle issue?

« Last Edit: Mon, 11 February 2019, 09:49:18 by pixelpusher »
:)

Offline Emir

  • Posts: 443
  • Location: Linköping, Sweden
  • Bandit
    • NordicHardware Keyboard Guide
Re: [Order] TX60/TX65/TX84se
« Reply #892 on: Mon, 11 February 2019, 16:01:22 »
Nervous to see the board.  It's funny, but I really don't know what to expect.  I thought we were getting the  brushed look of the ones that were previously posted, but by the looks of other photos floating around (like the two-tone example of the pad posted above and the one for sale on r/mm) this round of boards seem to have a pitted and much darker finish.  Maybe it's just a lighting/camera angle issue?

Someone posted their HHKB copper with a brushed finish in this thread recently, so yeah - it's going to be exciting to find out. :D

Offline Rumblehotep

  • Posts: 369
Re: [Order] TX60/TX65/TX84se
« Reply #893 on: Mon, 11 February 2019, 21:54:18 »
like the two-tone example of the pad posted above

Actually I think that's the nav cluster of a tx84.  You can still see the antiquing hairlines, I'm guessing from the robot, but it does seem very textured. 
I'm curious as to the process involved, could this be applied to different styles than copper and brass colors?

Offline popkorn62

  • Posts: 405
  • Location: California
  • No keyboards for old men
    • TX KEYBOARDS
Re: [Order] TX60/TX65/TX84se
« Reply #894 on: Tue, 12 February 2019, 13:19:00 »
Hi guys, to celebrate Valentine’s day, any US orders over $100 (before shipping and fees) will be shipped with a gift. Promo ends Sunday 2/17.

Online driftingbunnies

  • Posts: 64
Re: [Order] TX60/TX65/TX84se
« Reply #895 on: Wed, 13 February 2019, 09:18:02 »
Ah i gotta decide quickly then. Do we know when the extras form will close?

Offline razor_blade

  • Posts: 104
Re: [Order] TX60/TX65/TX84se
« Reply #896 on: Thu, 14 February 2019, 09:46:13 »
I sent a ticket on the website about getting the golden metal gasket added to my order. Just want to make sure it doesn't get missed. Thanks Kin/Popkorn!

Offline appaboy

  • Posts: 153
Re: [Order] TX60/TX65/TX84se
« Reply #897 on: Thu, 14 February 2019, 09:47:37 »
Anxious about my order
PC Singa, MIR80, TX84se, g80-3314, g80-0427, g80-5000 + 5700, G80-3700, g81-3000 HBU (og wob)

HASRO keycaps
OG POM keycaps
SAI OG Italian dyesubs
Scarface Fn blank

Offline popkorn62

  • Posts: 405
  • Location: California
  • No keyboards for old men
    • TX KEYBOARDS
Re: [Order] TX60/TX65/TX84se
« Reply #898 on: Thu, 14 February 2019, 15:11:46 »
Ah i gotta decide quickly then. Do we know when the extras form will close?

Extra form for?...I thought those are closed a long time ago...

Offline popkorn62

  • Posts: 405
  • Location: California
  • No keyboards for old men
    • TX KEYBOARDS
Re: [Order] TX60/TX65/TX84se
« Reply #899 on: Thu, 14 February 2019, 15:13:50 »
I sent a ticket on the website about getting the golden metal gasket added to my order. Just want to make sure it doesn't get missed. Thanks Kin/Popkorn!

I’m trying to see how can we work that out since technically all US orders are already being shipped to me...