Author Topic: [GB] TR60 integrated plate case & BLE PCB  (Read 18992 times)

0 Members and 1 Guest are viewing this topic.

Offline jakl

  • Posts: 18
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #150 on: Sat, 08 December 2018, 09:59:00 »
So I got another mail from Victor with the status of keyboard and PCB production. It is attached in the picture below, so apart from the BT PCB everything is ready or on the way.

I also attached two pictures of the BT PCB, which appears to be in the 3rd test version, so hopefully it will be finished soon.

Victor did not give me any specific dates for which I asked, so I asked for them again. I hope that he will send me date estimates in the next few days. I actually don't know how much time it will take for the keyboards to be packaged and shipped but I don't believe we will receive any of them before Christmas.
« Last Edit: Sat, 08 December 2018, 10:00:41 by jakl »

Online Aerizu

  • Posts: 94
  • Location: Japan
  • Professional Lurker
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #151 on: Sat, 08 December 2018, 10:46:07 »
So I got another mail from Victor with the status of keyboard and PCB production. It is attached in the picture below, so apart from the BT PCB everything is ready or on the way.

I also attached two pictures of the BT PCB, which appears to be in the 3rd test version, so hopefully it will be finished soon.

Victor did not give me any specific dates for which I asked, so I asked for them again. I hope that he will send me date estimates in the next few days. I actually don't know how much time it will take for the keyboards to be packaged and shipped but I don't believe we will receive any of them before Christmas.

Thanks for sharing as always.

Offline coffeeshopcoder

  • Posts: 204
  • Location: California
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #152 on: Mon, 10 December 2018, 12:44:10 »
So I got another mail from Victor with the status of keyboard and PCB production. It is attached in the picture below, so apart from the BT PCB everything is ready or on the way.

I also attached two pictures of the BT PCB, which appears to be in the 3rd test version, so hopefully it will be finished soon.

Victor did not give me any specific dates for which I asked, so I asked for them again. I hope that he will send me date estimates in the next few days. I actually don't know how much time it will take for the keyboards to be packaged and shipped but I don't believe we will receive any of them before Christmas.

many thanks for stepping up and keeping the updates flowing !

Offline TriangleLab

  • Thread Starter
  • Posts: 165
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #153 on: Mon, 17 December 2018, 01:08:50 »
Hello everyone,
   Some time ago, I was inconvenient to visit geekhack.org, and I apologize for this.Now I back to my home city, and it could be visit.
   Go back to the topic of TR60,last week jakl helped me upload the check list to the community. @Jakl ,thank you very much.
   I upload some new pictures to the imgur.
   
   
   
   
 
   Many many components.








3528 LEDs for Wired PCB ↑

Case ↑


Sub-PCB

Offline ChrisSwires

  • Posts: 113
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #154 on: Mon, 17 December 2018, 05:21:53 »
Hello everyone,
   Some time ago, I was inconvenient to visit geekhack.org, and I apologize for this.Now I back to my home city, and it could be visit.
   Go back to the topic of TR60,last week jakl helped me upload the check list to the community. @Jakl ,thank you very much.

Thanks for the update, appreciated!

Online Windeh

  • Posts: 251
  • Who?
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #155 on: Mon, 17 December 2018, 06:50:16 »
Oh hai, welcome back!

Online Aerizu

  • Posts: 94
  • Location: Japan
  • Professional Lurker
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #156 on: Mon, 17 December 2018, 07:48:13 »
Aww yeah! Can't wait to receive mine ;D

Offline TriangleLab

  • Thread Starter
  • Posts: 165
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #157 on: Wed, 19 December 2018, 04:32:40 »
Hello Everyone :),
1、The people who had only buy the wired PCB will send first. In optimism, their PCBs will be sent after about 3~5 days.I bought UV light and UV glue. The WS2812-4020 LED on the PCB upper surface need UV glue to reinforce. After reinforcement, the PCB will start sending to them.Today(2018-12-19),The UV light has arrived,and the UV glue's seller said the glue will be shipped to me on Thursday afternoon,so maybe 2018-12-22 I will get the glue and start to reinforce the WS2812 .Now I was QC the wired PCB, flashing the first QMK firmware into them and test them if they had any error and pick it out.
2、In the last week ,I said BT PCB  is the third version, it is solder in the SMT factory, because some component is too small to solder by myself. I started to design the fourth version - for example, to adjust the position of the battery, the location of the FPC interface.
3、The case after my QC,the brass back-plate's size is a little wrong :(.You can see it in the photo,so I return them to factory about 5 days and maybe 2018-12-23 I will get the right size brass plate.And the Aluminum back-plate is all right.


« Last Edit: Wed, 19 December 2018, 04:34:43 by TriangleLab »

Offline egla

  • Posts: 6
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #158 on: Wed, 19 December 2018, 09:19:22 »
Why aren't the orders without PCBs shipped first?

Offline TriangleLab

  • Thread Starter
  • Posts: 165
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #159 on: Tue, 25 December 2018, 23:57:47 »
Hi Everyone,
I received the UV glue,the UV glue gun,and I test it.The UV glue is the special glue for electronic products,PCBs and chips. It works very very. So the wired PCB is all ready to go. :D



Offline TriangleLab

  • Thread Starter
  • Posts: 165
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #160 on: Tue, 01 January 2019, 06:25:24 »
Hi Everyone :),
    The ship work is start.So if you want to change the address please send me an email. My email address is skycham#outlook.com(please replace the  # to @).And the first ship is wird PCBs order,case order, bluetooth PCB's test version 4 is finish and I think it will be the last test version and go into the final production process as soon as possible.


Online mxgian99

  • Posts: 30
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #162 on: Tue, 01 January 2019, 09:26:26 »
is the TR60 PCB added to QMK already?

Online Starston3

  • Posts: 98
  • Location: Bay Area
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #163 on: Tue, 01 January 2019, 09:37:41 »
is the TR60 PCB added to QMK already?
Looking at the QMK repo, not yet.

Offline HamKenobi

  • Posts: 12
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #164 on: Fri, 11 January 2019, 09:18:25 »
Are we supposed to send the money for shipping and calculate it on own own? Or are we going to get an email saying how much it will be??????????????????

Offline Gobluebro

  • Posts: 27
  • Location: United States
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #165 on: Fri, 11 January 2019, 09:31:28 »
Are we supposed to send the money for shipping and calculate it on own own? Or are we going to get an email saying how much it will be??????????????????

I got this from the last email
Quote
The shipping fee detail list for everyone is being prepared, I will send it to you later.

Everybody order is different, and the weight of the package is different, so please give some time to sort the excel list.

Haven't heard anything yet but just gonna keep waiting.

Offline jakl

  • Posts: 18
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #166 on: Tue, 15 January 2019, 14:11:07 »
I wrote another email to Victor, to find out how the shipping is progressing. Here is his reponse.

Sorry for my inactive in the geekhack. I was sink into the mail ocean, I have to through many many email to check everyone’s address, phone number and others details. It is a little terribly busy.
The shipp work is still processing. All the order which one without include Bluetooth PCB could ship before Chinese New Year holiday If every buyer pay the international shipping fee on time.
Most package I try to use DHL to ship them, and some package’s destination is nearly China such Singapore and Japan, I use the sf-express.com
The BT-PCB order I think should ship after Chinese New Year holiday.
After the third test version, the Bluetooth PCB had test 4th  and 5th two versions. The factory made an stupid mistake, you can see it in the attachment.
Now it is in the 5th  test version, I think it could work well, tomorrow I could get the it from the SMT factory. The factory engineer had sent me two photos. I also put them in the attachment.
I had upload the wired pcb’s document to the github, the URL is  https://github.com/fox-lab/qmk_firmware/tree/master/keyboards/tr60w


Chinese New Year is on 5th of February, I don't know how many days around this date are the actual holidays.

The attachment included a few photos of the BT PCB, where the factory added the wrong solder pads for battery holders. Not much to see here, so didn't include them in the post.

Offline Gobluebro

  • Posts: 27
  • Location: United States
Re: [GB] TR60 integrated plate case & BLE PCB
« Reply #167 on: Tue, 15 January 2019, 14:44:30 »
Thank you for the update jakl