Author Topic: Keycult - No. 1/60 Rev. 1 and No. 1/65 Rev. 1  (Read 93957 times)

0 Members and 1 Guest are viewing this topic.

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Thread Starter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.io
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #200 on: Sat, 19 January 2019, 17:50:25 »
Any word on extra pcbs or plates? Thanks.

A limited quantity will be available, but no word yet on specific timing. Maybe next week or the week after.

Edit: Preference will also be given to 1/60 and 1/65 owners, so no one will be able to scoop up all the extras in order to corner the aftermarket poly half-plate market :P
« Last Edit: Sat, 19 January 2019, 18:20:26 by riotonthebay »

Offline otanishock

  • One of the cool kids :>
  • Posts: 708
  • Location: Boston
  • ファーストラブ
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #201 on: Sat, 19 January 2019, 18:42:45 »

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Thread Starter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.io
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #202 on: Sun, 20 January 2019, 08:00:20 »
B-stock form here: closed https://goo.gl/ejXSsr

It'll be open for ~24 hours, closing tomorrow at 9am EST. Please make sure to read everything in the description of the form. <3
« Last Edit: Mon, 21 January 2019, 08:35:41 by riotonthebay »

Offline fishinaspacesuit

  • Posts: 95
  • Location: Singapore
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #203 on: Sun, 20 January 2019, 08:12:06 »
Good luck everyone! I'm quite fine with these B-stock external defects, I'm keeping my fingers crossed.. tried for all of the A-stock boards but either my fingers or latency from Singapore isn't fast enough :confused:

Offline swangful

  • Posts: 350
  • Location: 949
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #204 on: Sun, 20 January 2019, 12:17:48 »

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Thread Starter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.io
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #205 on: Mon, 21 January 2019, 07:23:29 »
Hey gang, we'll close the form in about 40 minutes and pick winners. Invoices will be sent out fairly quickly and you'll have 24 hours to pay. All boards will be shipped out tomorrow morning.

Thanks so much to everyone who's entered. We had a ton of interest even in these b-stock boards. I know this run was really limited, and while we'll continue to have limited runs like these in the future, we'll also be mixing in much larger runs as well to hopefully reach many more people.

Happy MLK Day!

edit: Invoices sent. Thanks for everyone's interest!
« Last Edit: Mon, 21 January 2019, 08:35:22 by riotonthebay »

Offline SolidCactus

  • Posts: 233
  • Location: UK
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #206 on: Mon, 21 January 2019, 07:34:04 »
Awesome, thanks for update.

I’m sure I can speak for most of us but please bring on the larger runs. I would still love to pick up a No. 1!

Offline ramnes

  • Posts: 828
  • Location: France
  • T fou, mec?
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #207 on: Mon, 21 January 2019, 12:15:39 »
So I failed on the raffle too. Awesome.  :))
23h18 - photekq: hhkb with silenced realforce sliders and lubricated well is
23h18 - photekq: the best switch i've used

Offline TheMilkmen

  • Posts: 29
  • Location: MD, USA
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #208 on: Mon, 21 January 2019, 12:19:25 »
So I failed on the raffle too. Awesome.  :))
Right there with you, hopefully I can snag on of the cerakoted ones later on then

Offline Solotov

  • Posts: 337
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #209 on: Mon, 21 January 2019, 18:22:40 »
Now waiting for the updates on No.2  ;)
Flex is love, flex is life.

Offline mgsickler

  • Posts: 659
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #210 on: Mon, 21 January 2019, 20:35:11 »
Dang. I missed out on b stock.

Online LightningXI

  • * Elevated Elder
  • Posts: 3349
  • Location: New York
  • PPD
    • ArtisanMacro
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #211 on: Tue, 22 January 2019, 02:01:34 »
Now waiting for the updates on No.2  ;)
This man speaks what my heart wants

Offline jobicoppola

  • Posts: 19
  • Location: Charlotte
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #212 on: Tue, 22 January 2019, 10:23:43 »
Also flopped trying to get b-stock but really like the designs, curious to see how cerakoting works out...

Offline AlcoholEnthusiast

  • Posts: 451
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #213 on: Tue, 22 January 2019, 13:49:35 »
Now waiting for the updates on No.2  ;)

Me too man, me too.

Offline Kafka

  • Posts: 370
  • i like clean things
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #214 on: Thu, 24 January 2019, 09:58:23 »

Keeping an eye out for a cerakoted 60  :cool:

Offline airlangga07

  • Posts: 70
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #215 on: Thu, 24 January 2019, 20:57:11 »
Any news on the extra plates? Looking forward for the PC partial plate for 1/60!

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Thread Starter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.io
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #216 on: Sat, 26 January 2019, 05:09:54 »
Any news on the extra plates? Looking forward for the PC partial plate for 1/60!

We're waiting until the remaining cases are sold before selling these, and we're waiting on some cerakote samples that should arrive tomorrow to determine whether those cases will be cerakoted or sold as b-stock. Expect a plan in the coming days, as well as some more info on what's coming next for Keycult in general. =)

Offline SolidCactus

  • Posts: 233
  • Location: UK
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #217 on: Sat, 26 January 2019, 06:12:35 »
Oh awesome! Very excited to see what is coming up next. Hopefully I can snag a TKL

Offline Regret

  • Posts: 34
  • Location: Boundary of the Tech Bubble
  • I regret nothing
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #218 on: Sat, 26 January 2019, 20:16:54 »
Any news on the extra plates? Looking forward for the PC partial plate for 1/60!

We're waiting until the remaining cases are sold before selling these, and we're waiting on some cerakote samples that should arrive tomorrow to determine whether those cases will be cerakoted or sold as b-stock. Expect a plan in the coming days, as well as some more info on what's coming next for Keycult in general. =)

Excited to snag an extra PCB for my no.1/65!
No.2 Rev.1 | Gat Black Inks | OG Dyesubs \\ No.1/65 Silver & Brass | Retooled Cherry Blacks | GMK Coniferous \\ Ai03 Lunar | SKCM Blues | AEK \\ Aeryx Aegis 1800 | C3 Tangerines | GMK WoB

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Thread Starter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.io
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #219 on: Sat, 02 February 2019, 19:58:31 »
Expect a plan in the coming days, as well as some more info on what's coming next for Keycult in general. =)

While this is technically the "coming days," I hoped to have more information out much sooner and am still not ready to share more. Currently waiting to hear from some potential Cerakote suppliers before announcing our plans for the remaining boards (and poly partial plates/extra PCBs). I should hear back Any Day Now™. So let this stand as a tentative pre-announcement notice. Or something.

Offline bthezebra

  • Posts: 436
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #220 on: Sat, 02 February 2019, 20:03:59 »
Expect a plan in the coming days, as well as some more info on what's coming next for Keycult in general. =)

While this is technically the "coming days," I hoped to have more information out much sooner and am still not ready to share more. Currently waiting to hear from some potential Cerakote suppliers before announcing our plans for the remaining boards (and poly partial plates/extra PCBs). I should hear back Any Day Now. So let this stand as a tentative pre-announcement notice. Or something.
Still excited to take my fourth shot!

Offline ramnes

  • Posts: 828
  • Location: France
  • T fou, mec?
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #221 on: Sun, 03 February 2019, 09:28:25 »
:riotpls:
23h18 - photekq: hhkb with silenced realforce sliders and lubricated well is
23h18 - photekq: the best switch i've used

Offline merlin64

  • Posts: 1262
  • Location: Seattle, WA
    • MechMerlin
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #222 on: Thu, 07 February 2019, 13:24:20 »
Hello all and @riotonthebay,

We've had someone ping QMK regarding support of this board(s).  If I could be pointed towards the pins used and the switch matrix, I can get them into QMK Configurator this weekend. Assuming these boards are QMK compatible of course.

Of course if these have already been programmed and are just sitting in a branch somewhere on Github, please kindly contribute via pull request, or make links more available so we can point people in the right direction.

Thank you very much for your time!

Offline SolidCactus

  • Posts: 233
  • Location: UK
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #223 on: Thu, 07 February 2019, 13:28:10 »
Hello all and @riotonthebay,

We've had someone ping QMK regarding support of this board(s).  If I could be pointed towards the pins used and the switch matrix, I can get them into QMK Configurator this weekend. Assuming these boards are QMK compatible of course.

Of course if these have already been programmed and are just sitting in a branch somewhere on Github, please kindly contribute via pull request, or make links more available so we can point people in the right direction.

Thank you very much for your time!

MechMerlin you are the best! Thanks for keeping up the good work and I'm still looking forward to your stream on tracing the pins/matrix with the multimeter!

Offline merlin64

  • Posts: 1262
  • Location: Seattle, WA
    • MechMerlin
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #224 on: Thu, 07 February 2019, 13:48:19 »
Alright! I was just informed that this is a Wilba PCB, therefore VIA! Problem solved lol. No need to flash PCB unless you absolutely want some of the additional QMK features.

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Thread Starter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.io
Re: Keycult – No. 1/60 & No. 1/65 – B-stock available Jan 20
« Reply #225 on: Thu, 07 February 2019, 20:41:20 »
Thanks for checking in! Yep, just for absolute clarity, these are WT60-A and WT65-A PCBs that ship with VIA compatibility. A bit more info as well as links to download the VIA Configurator can be found here: https://keycult.io/pages/no-1-60-no-1-65. If anyone needs more technical info, you can refer to the wilba.tech files already in QMK.

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Thread Starter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.io
« Last Edit: Fri, 15 February 2019, 18:05:43 by riotonthebay »

Offline RamenTechMech

  • Posts: 136
  • Location: United States
Re: Keycult – No. 1/60 & No. 1/65
« Reply #227 on: Fri, 15 February 2019, 18:26:40 »
Do you have an Instagram account where we could follow you?

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Thread Starter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.io
Re: Keycult – No. 1/60 & No. 1/65
« Reply #228 on: Fri, 15 February 2019, 18:29:52 »
Do you have an Instagram account where we could follow you?

Sure do: https://www.instagram.com/keycult/ (fairly sparse at the moment)

Offline clappingcactus

  • Posts: 371
  • Location: Ottawa, Canada
Re: Keycult – No. 1/60 & No. 1/65
« Reply #229 on: Fri, 15 February 2019, 18:32:38 »
Interesting. Will the No. 2 be a case-within-a-case design?

Offline HouseofSuffering

  • Posts: 199
  • Location: California
Re: Keycult – No. 1/60 & No. 1/65
« Reply #230 on: Fri, 15 February 2019, 18:38:40 »
I really hope the No. 2 is a ten keyless or bigger. Can't wait for the reveal.

Only reason I haven't hunted down a No. 1 is because I am hoping I can win a No. 2. lol

 :thumb:

Offline cdhoffmann

  • Posts: 65
Re: Keycult – No. 1/60 & No. 1/65
« Reply #231 on: Fri, 15 February 2019, 18:39:08 »
Oh man, really hope i can snag an extra 60

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Thread Starter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.io
Re: Keycult – No. 1/60 & No. 1/65
« Reply #232 on: Fri, 15 February 2019, 18:39:47 »
I really hope the No. 2 is a ten keyless or bigger. Can't wait for the reveal.

Only reason I haven't hunted down a No. 1 is because I am hoping I can win a No. 2. lol

 :thumb:

Tenkeyless

Offline vtachkov

  • Posts: 199
Re: Keycult – No. 1/60 & No. 1/65
« Reply #233 on: Fri, 15 February 2019, 18:41:27 »
The No.2 is a TKL, says so in the post but I think we've known that since last year. Just got my bonus payment today so my wallet is ready.

Would you expect the larger releases to be less expensive than the limited releases, due to the volume of boards made correlating to a better price from the manu?

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5277
  • Location: United Kingdom
Re: Keycult – No. 1/60 & No. 1/65
« Reply #234 on: Fri, 15 February 2019, 18:42:46 »
GL everyone with No. 2, no matter the price, I'm too frickin' poor. :p

I love the engraving though, someone translate pls.

Offline HouseofSuffering

  • Posts: 199
  • Location: California
Re: Keycult – No. 1/60 & No. 1/65
« Reply #235 on: Fri, 15 February 2019, 18:43:16 »
I really hope the No. 2 is a ten keyless or bigger. Can't wait for the reveal.

Only reason I haven't hunted down a No. 1 is because I am hoping I can win a No. 2. lol

 :thumb:

Tenkeyless

The No.2 is a TKL, says so in the post but I think we've known that since last year. Just got my bonus payment today so my wallet is ready.

Would you expect the larger releases to be less expensive than the limited releases, due to the volume of boards made correlating to a better price from the manu?

Sweet.

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Thread Starter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.io
Re: Keycult – No. 1/60 & No. 1/65
« Reply #236 on: Fri, 15 February 2019, 18:45:01 »
The No.2 is a TKL, says so in the post but I think we've known that since last year. Just got my bonus payment today so my wallet is ready.

Would you expect the larger releases to be less expensive than the limited releases, due to the volume of boards made correlating to a better price from the manu?

I hope so but can't promise anything just yet. Our CNC machining costs are increasing somewhat as of this year, which offsets some of the savings from volume. And as anyone who's produced a board knows, finding a reliable factory is very difficult and time consuming, so we can't necessarily turn away from our current source due to increasing costs. Just going to have to wait and see how everything shakes out.

Offline beamingrobot

  • * Vendor
  • Posts: 549
  • Location: Singapore | Malaysia
  • もうけい
    • monokei
Re: Keycult – No. 1/60 & No. 1/65
« Reply #237 on: Fri, 15 February 2019, 18:59:55 »
GL everyone with No. 2, no matter the price, I'm too frickin' poor. :p

I love the engraving though, someone translate pls.

It just says 'limited edition'

Also looking forward to the No. 2  :p
http://monokei.co

Jane v2 | Jane v2 CE | KFE | KFE CE | Singa R1 | HHKB | Custom G80-3000 | Kei | Hiro |

Offline pr0ximity

  • Posts: 2550
  • Location: Vacationland
| Flickr | Current: Koala/GSKT-00/JaneV2CE/Whale/Pro1/356mini/1390120/F107/3101

Offline RamenTechMech

  • Posts: 136
  • Location: United States
Re: Keycult – No. 1/60 & No. 1/65
« Reply #239 on: Fri, 15 February 2019, 22:39:38 »
Hopefully I can purchase a 65, have you revealed what the colors are going to be?  :cool:

Offline LeoShi

  • Posts: 72
Re: Keycult – No. 1/60 & No. 1/65
« Reply #240 on: Fri, 15 February 2019, 23:15:39 »
damn, I need No.2

Offline Starston3

  • Posts: 229
  • Location: Bay Area
Re: Keycult – No. 1/60 & No. 1/65
« Reply #241 on: Sat, 16 February 2019, 00:52:06 »
Cerakote 65 you say. I’ll def be on the look out.

Offline donutholer

  • Posts: 7
Re: Keycult – No. 1/60 & No. 1/65
« Reply #242 on: Sat, 16 February 2019, 03:17:45 »
Yikes where's my wallet for No. 2 or a cerakoted No. 65/60? On a side note, would it be possible to get one of the No. 60/65 raw or in the b/c-stock condition so we could cerakote ourselves?

Offline otanishock

  • One of the cool kids :>
  • Posts: 708
  • Location: Boston
  • ファーストラブ
Re: Keycult – No. 1/60 & No. 1/65
« Reply #243 on: Sat, 16 February 2019, 15:53:04 »
Are you saying there will be another one added to my collection?  :cool:

Offline iaman

  • Posts: 148
Re: Keycult – No. 1/60 & No. 1/65
« Reply #244 on: Sun, 17 February 2019, 09:12:20 »
Quote
We have plans for some much larger keyboard releases as well as more limited runs, accessories, and other miscellany. Stay tuned!

I know, in my heart of hearts, that this means releases with more stock, but my heathen full-size brain is holding out hope.

Offline riotonthebay

  • Cherry Peasant
  • * Destiny Supporter
  • Thread Starter
  • Posts: 2048
  • Location: Raleigh, NC
  • keycult.io
Re: Keycult – No. 1/60 & No. 1/65
« Reply #245 on: Sun, 17 February 2019, 09:23:04 »
Yikes where's my wallet for No. 2 or a cerakoted No. 65/60? On a side note, would it be possible to get one of the No. 60/65 raw or in the b/c-stock condition so we could cerakote ourselves?

We're going to be cerakoting all of the remaining boards so that they can hopefully be sold as a-stock. I'm sure that some people would prefer a b-stock board that they can coat/finish themselves, but there's still a bunch of people hoping to get a board, and I think the large majority of that group would prefer to buy an a-stock board.

Offline AlcoholEnthusiast

  • Posts: 451
Re: Keycult – No. 1/60 & No. 1/65
« Reply #246 on: Mon, 18 February 2019, 00:27:10 »
When the 60/65 are back from cerakoting will they be sold FCFS? Or through some kind of raffle.

Really excited at a shot to get one of these!

Offline Kafka

  • Posts: 370
  • i like clean things
Re: Keycult – No. 1/60 & No. 1/65
« Reply #247 on: Mon, 18 February 2019, 10:25:07 »
Waiting patiently  :-X

Offline ejewell89

  • Posts: 693
  • Location: Pennsylvania
  • 4ever Smol
Re: Keycult – No. 1/60 & No. 1/65
« Reply #248 on: Mon, 18 February 2019, 10:28:58 »


              

Offline nickheller

  • Cherry ML life
  • * Destiny Supporter
  • Posts: 1595
  • Location: Earth
Re: Keycult – No. 1/60 & No. 1/65
« Reply #249 on: Mon, 18 February 2019, 10:47:43 »
Show Image


Show Image

What the **** is going on with that top row tho
Gotcha. Those sacks look mouth watering.