Author Topic: [GB] Fox Lab - Leaf 60  (Read 149964 times)

0 Members and 1 Guest are viewing this topic.

Offline ejewell89

  • Posts: 691
  • Location: Pennsylvania
  • 4ever Smol
Re: [GB] Fox Lab - Leaf 60
« Reply #600 on: Wed, 08 May 2019, 09:10:34 »
Hi.

I got the keyboard well.

But I don't know how to do keymaps.

Please let me know which one to choose from in QMK.

And now the "I did not enter the GB" remorse.

There were a lot, be patient little one <3
              

Offline mnpq.raven

  • Posts: 76
  • Location: Germany
Re: [GB] Fox Lab - Leaf 60
« Reply #601 on: Wed, 08 May 2019, 09:35:00 »
Also got my Leaf60 today
There's no rubber feet included ?

Offline sirpensir

  • Posts: 10
Re: [GB] Fox Lab - Leaf 60
« Reply #602 on: Wed, 08 May 2019, 10:23:23 »
Anyone looking to sell their e-white or poly WKL? DM me if you are :)

Offline 0sirisTV

  • Posts: 13
Re: [GB] Fox Lab - Leaf 60
« Reply #603 on: Wed, 08 May 2019, 10:54:11 »
I know things are mostly shipped at this point but if anyone is looking to let go of their spot just let me know. I have no color bias.

Offline r4bbl3d4bbl3

  • Posts: 116
  • Location: USA
Re: [GB] Fox Lab - Leaf 60
« Reply #604 on: Wed, 08 May 2019, 11:11:21 »
A little late now but I am just getting around to ordering switches and stabs. I am a bit confused as to which size I am supposed to get for the stabs. I have the standard layout with the standard non-hotswap PCB. Can anyone help me out?

Offline PoochZag

  • Posts: 60
  • Location: Indiana, US
Re: [GB] Fox Lab - Leaf 60
« Reply #605 on: Wed, 08 May 2019, 11:16:58 »
A little late now but I am just getting around to ordering switches and stabs. I am a bit confused as to which size I am supposed to get for the stabs. I have the standard layout with the standard non-hotswap PCB. Can anyone help me out?

It depends on the layout you want to build. Your spacebar will likely need either a 6.25U or 7U stab depending on which bottom row you choose to build.

You will need up to 4 2U stabs, one for each key you have that is 2U or above. For a completely standard ANSI layout, you would need 1 6.25U and 4 2U stabs (left shift, right shift, enter and backspace). But if you split right shift, or split backspace, that would eliminate the need for a stab.

If you're still unsure post the layout you are aiming for and we will help you out
TX-CP, TX60, Campine Mk. III, Mira SE

Offline r4bbl3d4bbl3

  • Posts: 116
  • Location: USA
Re: [GB] Fox Lab - Leaf 60
« Reply #606 on: Wed, 08 May 2019, 11:26:23 »
A little late now but I am just getting around to ordering switches and stabs. I am a bit confused as to which size I am supposed to get for the stabs. I have the standard layout with the standard non-hotswap PCB. Can anyone help me out?

It depends on the layout you want to build. Your spacebar will likely need either a 6.25U or 7U stab depending on which bottom row you choose to build.

You will need up to 4 2U stabs, one for each key you have that is 2U or above. For a completely standard ANSI layout, you would need 1 6.25U and 4 2U stabs (left shift, right shift, enter and backspace). But if you split right shift, or split backspace, that would eliminate the need for a stab.

If you're still unsure post the layout you are aiming for and we will help you out

Thanks for the reply. I am looking for a completely standard ANSI layout so I will go with the 4 x 2U and 1 x 6.25U kit.

Offline noahf

  • Posts: 81
Re: [GB] Fox Lab - Leaf 60
« Reply #607 on: Wed, 08 May 2019, 16:46:28 »
Also got my Leaf60 today
There's no rubber feet included ?

just received my leaf 60 and it had 4 rubber feat included.

Offline mnpq.raven

  • Posts: 76
  • Location: Germany
Re: [GB] Fox Lab - Leaf 60
« Reply #608 on: Wed, 08 May 2019, 18:24:45 »
Just did a quick typing test on the Leaf60, very solid board!
There's some aspects i'd like to point out but it's really just very nitpicky details, this board is built like a tank, the finish is spot on without any smear as far as i can tell


Offline ArchDill

  • * Esteemed Elder
  • Posts: 1308
  • Location: OK
Re: [GB] Fox Lab - Leaf 60
« Reply #609 on: Wed, 08 May 2019, 18:32:18 »
I do not think I realized there was a hotswap PCB... I should have gotten one.

If anyone has one for sale with a hot-swap PCB... let me know.
« Last Edit: Wed, 08 May 2019, 18:40:44 by ArchDill »

Online juaninamilli

  • Posts: 186
Re: [GB] Fox Lab - Leaf 60
« Reply #610 on: Wed, 08 May 2019, 18:44:59 »
What are the aspects you want to point out?
Just did a quick typing test on the Leaf60, very solid board!
There's some aspects i'd like to point out but it's really just very nitpicky details, this board is built like a tank, the finish is spot on without any smear as far as i can tell


Offline mnpq.raven

  • Posts: 76
  • Location: Germany
Re: [GB] Fox Lab - Leaf 60
« Reply #611 on: Wed, 08 May 2019, 19:11:54 »
What are the aspects you want to point out?
Just did a quick typing test on the Leaf60, very solid board!
There's some aspects i'd like to point out but it's really just very nitpicky details, this board is built like a tank, the finish is spot on without any smear as far as i can tell

Stabilizer cutouts and gaskets holes being a bit too tight, missing rubber feet in my order, that's all. Still a top notch board all around

Offline fireworm

  • Posts: 423
Re: [GB] Fox Lab - Leaf 60
« Reply #612 on: Wed, 08 May 2019, 19:31:33 »
What are the aspects you want to point out?
Just did a quick typing test on the Leaf60, very solid board!
There's some aspects i'd like to point out but it's really just very nitpicky details, this board is built like a tank, the finish is spot on without any smear as far as i can tell

Stabilizer cutouts and gaskets holes being a bit too tight, missing rubber feet in my order, that's all. Still a top notch board all around

Hello fellow e-red buyer. Is the red absolutely perfect?  Yep, I agree.  I think we are the only two in the whole gb.

Offline mnpq.raven

  • Posts: 76
  • Location: Germany
Re: [GB] Fox Lab - Leaf 60
« Reply #613 on: Wed, 08 May 2019, 19:38:41 »
Hello fellow e-red buyer. Is the red absolutely perfect?  Yep, I agree.  I think we are the only two in the whole gb.
I agree, my favorite color is red so seeing the E-red color option i couldn't say no to that, this shade of red is absolutely gorgeous

Offline Jkshowman

  • Posts: 48
Re: [GB] Fox Lab - Leaf 60
« Reply #614 on: Wed, 08 May 2019, 20:21:59 »
After paying shipping, how would one get tracking? :O

Online juaninamilli

  • Posts: 186
Re: [GB] Fox Lab - Leaf 60
« Reply #615 on: Wed, 08 May 2019, 20:24:16 »
Only assuming here, but I think just wait. I paid on the 3rd and still havenít seen tracking.
After paying shipping, how would one get tracking? :O

Offline fireworm

  • Posts: 423
Re: [GB] Fox Lab - Leaf 60
« Reply #616 on: Wed, 08 May 2019, 21:03:01 »
Only assuming here, but I think just wait. I paid on the 3rd and still havenít seen tracking.
After paying shipping, how would one get tracking? :O
I did not get any emails, only the text message from DHL.

Offline dantambok

  • Posts: 870
  • Location: Philippines
Re: [GB] Fox Lab - Leaf 60
« Reply #617 on: Wed, 08 May 2019, 21:31:26 »
Just want to ask, does DHL always send a text when a package is shipped? I've gotten packages from DHL more than a dozen times and i've never received a text before.  :))
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / 2x Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 3x TGRxSinga Unikorn / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / Rukia / 2x FMJ80 / TGR Jane V2 CE / UTD 360C / Matrix Project F / IDB60 / is0 

Coming soon --  MXSS / Modern M0110 / PC HBCP / Noxary 280S / Noxary XRF / LZ PhysiX / Keycult 1/60 rev1 / Lynx50 / Matrix 2.0 OG / 2x GSKT-00 / Duck Viper v3 / FLX Virgo / Noxary Vulcan Pro

40 ish sets and 30ish sets in GB

Offline ChickenBear

  • Posts: 16
Re: [GB] Fox Lab - Leaf 60
« Reply #618 on: Wed, 08 May 2019, 21:59:02 »
Just did a quick typing test on the Leaf60, very solid board!
There's some aspects i'd like to point out but it's really just very nitpicky details, this board is built like a tank, the finish is spot on without any smear as far as i can tell


Did you lube the switches at all?

Offline senter

  • * Maker
  • Thread Starter
  • Posts: 848
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox Lab - Leaf 60
« Reply #619 on: Wed, 08 May 2019, 22:05:14 »
Don't worry if you haven't received the text message from DHL. There were around 180 packages in total so the proxy cannot ship them out in a single batch. They will send them out in two days.

I've uploaded the code/firmware to my own repo. I want to merge it to the main repo but I'm not very familiar with Github. Specifically, I don't know how to do it without fetching the lasted codes from the upstream. I'm super busy in recent days. I'll figure it out later when I'm available. For now please just use the codes in my own repo first.

Offline dantambok

  • Posts: 870
  • Location: Philippines
Re: [GB] Fox Lab - Leaf 60
« Reply #620 on: Wed, 08 May 2019, 22:08:25 »
Don't worry if you haven't received the text message from DHL. There were around 180 packages in total so the proxy cannot ship them out in a single batch. They will send them out in two days.

I've uploaded the code/firmware to my own repo. I want to merge it to the main repo but I'm not very familiar with Github. Specifically, I don't know how to do it without fetching the lasted codes from the upstream. I'm super busy in recent days. I'll figure it out later when I'm available. For now please just use the codes in my own repo first.

Thank you for the prompt replies and stress free GB. The world would be a better place if every GB was like that.  :thumb:
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / 2x Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 3x TGRxSinga Unikorn / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / Rukia / 2x FMJ80 / TGR Jane V2 CE / UTD 360C / Matrix Project F / IDB60 / is0 

Coming soon --  MXSS / Modern M0110 / PC HBCP / Noxary 280S / Noxary XRF / LZ PhysiX / Keycult 1/60 rev1 / Lynx50 / Matrix 2.0 OG / 2x GSKT-00 / Duck Viper v3 / FLX Virgo / Noxary Vulcan Pro

40 ish sets and 30ish sets in GB

Offline kidpid

  • Posts: 81
Re: [GB] Fox Lab - Leaf 60
« Reply #621 on: Wed, 08 May 2019, 22:58:47 »
I want to merge it to the main repo but I'm not very familiar with Github. Specifically, I don't know how to do it without fetching the lasted codes from the upstream. I'm super busy in recent days. I'll figure it out later when I'm available. For now please just use the codes in my own repo first.

Go to the main repo on GitHub and click the "New pull request" button next to the branch selection drop down. Choose your fork of the repo on the right then choose the branch you want. If you choose master then you'll merge in the commit you have for the UniGo66, XD60v3, TR60w, as well as the one for Leaf60.

Offline AlcoholEnthusiast

  • Posts: 451
Re: [GB] Fox Lab - Leaf 60
« Reply #622 on: Thu, 09 May 2019, 00:33:09 »
If anyone decides they absolutely hates WKL and wants to trade a PC WKL top for a PC Regular top (long shot, I know) let me know!

Offline lanyusea

  • Posts: 326
Re: [GB] Fox Lab - Leaf 60
« Reply #623 on: Thu, 09 May 2019, 00:46:34 »
218949-0

thank you Fox!
HHKB Type-s / 4x KMAC Happy / 3x Duck Viper v1 / 2x Duck Viper v2 / Duck TCV3 / Red Scarf 77 / 2x Infinity 60 / 2x ALF HHKB / LZ-CE / FJELL / Canoe / Canoe PC / Canoe FE / ARES Prototype / 3x Ares / LC-CLSh / TX60 / YODA2 / E6-V2 / E6-V2 FE / CAMP LC60 / 2x EM 7 / 4x Leaf 60 / UHK / Project F / Polaris / Plenty of keycaps

Offline boog

  • Posts: 28
Re: [GB] Fox Lab - Leaf 60
« Reply #624 on: Thu, 09 May 2019, 00:53:38 »

Offline yemeisong

  • Posts: 18
Re: [GB] Fox Lab - Leaf 60
« Reply #625 on: Thu, 09 May 2019, 00:59:50 »
(Attachment Link)

thank you Fox!
what color is that on the bottom? looks great!

Offline r4bbl3d4bbl3

  • Posts: 116
  • Location: USA
Re: [GB] Fox Lab - Leaf 60
« Reply #626 on: Thu, 09 May 2019, 01:06:29 »
(Attachment Link)

thank you Fox!

**** man, $1500 on the same keyboard, yeesh.

Offline blizzara01

  • Posts: 153
Re: [GB] Fox Lab - Leaf 60
« Reply #627 on: Thu, 09 May 2019, 01:26:38 »
(Attachment Link)

thank you Fox!
Thats nice.  :eek:

What does polycarb looks with gold pvd brass plate?

Offline loud_asian

  • Posts: 579
Re: [GB] Fox Lab - Leaf 60
« Reply #628 on: Thu, 09 May 2019, 01:39:41 »
Thereís not enough space between the plate and bottom of the inside of the case. The alps switch legs are touching the case :(

Offline orim23

  • Posts: 83
  • Location: CH
Re: [GB] Fox Lab - Leaf 60
« Reply #629 on: Thu, 09 May 2019, 01:41:39 »
Just got the Message from DHL. Should be in my Hand by tomorrow!
Just started lubing switches!

Offline DePulse

  • Posts: 53
Re: [GB] Fox Lab - Leaf 60
« Reply #630 on: Thu, 09 May 2019, 03:11:35 »
[delete]
« Last Edit: Thu, 09 May 2019, 11:41:07 by DePulse »

Offline mnpq.raven

  • Posts: 76
  • Location: Germany
Re: [GB] Fox Lab - Leaf 60
« Reply #631 on: Thu, 09 May 2019, 06:00:23 »
anyone who can help me with programming the keymap?  :( pls pm me on discord DePulse
#3682
It's not on QMK yet, gotta wait for senter's response i guess

Offline up-in

  • Posts: 22
  • Location: DE
Re: [GB] Fox Lab - Leaf 60
« Reply #632 on: Thu, 09 May 2019, 06:33:35 »
There are so many rubber pads, do someone know what's that for?

Offline yemeisong

  • Posts: 18
Re: [GB] Fox Lab - Leaf 60
« Reply #633 on: Thu, 09 May 2019, 06:36:00 »
There are so many rubber pads, do someone know what's that for?
the gaskets. they go in between the plate and the top/bottom case for dampening.

Offline Ecty

  • Posts: 4
Re: [GB] Fox Lab - Leaf 60
« Reply #634 on: Thu, 09 May 2019, 09:01:48 »
Hi Senter, sent a PM regarding the board I just received.

Offline ArchDill

  • * Esteemed Elder
  • Posts: 1308
  • Location: OK
Re: [GB] Fox Lab - Leaf 60
« Reply #635 on: Thu, 09 May 2019, 09:53:30 »
If anyone has an extra brass hhkb plate I would like to buy one.

Offline Aevyn

  • Posts: 55
Re: [GB] Fox Lab - Leaf 60
« Reply #636 on: Thu, 09 May 2019, 09:56:03 »
If anyone has an extra brass hhkb plate I would like to buy one.
I should have one. I got a PC hhkb and brass pvd hhkb plate. I will probably be using the PC one. I'll PM you once it arrives.

Sent from my SM-G950U using Tapatalk


Offline ArchDill

  • * Esteemed Elder
  • Posts: 1308
  • Location: OK
Re: [GB] Fox Lab - Leaf 60
« Reply #637 on: Thu, 09 May 2019, 09:56:44 »
If anyone has an extra brass hhkb plate I would like to buy one.
I should have one. I got a PC hhkb and brass pvd hhkb plate. I will probably be using the PC one. I'll PM you once it arrives.

Sent from my SM-G950U using Tapatalk

That would be great, thanks!

Offline The Raygin Asian

  • Posts: 3
  • Location: Oakland, CA
Re: [GB] Fox Lab - Leaf 60
« Reply #638 on: Thu, 09 May 2019, 12:46:26 »
Eagerly awaiting that DHL text

Offline yicaoyimu

  • Posts: 1069
  • Location: San Jose, CA
Re: [GB] Fox Lab - Leaf 60
« Reply #639 on: Thu, 09 May 2019, 12:49:15 »
I didn't get any DHL text and I just received it yesterday. Can't wait to put it together this weekend!
360 Corsa - KMAC2 - Duck Blackbird - LZ Iron  - Matrix Abel - Matrix Lab 8XV2.0 - Fox Leaf 60 - Lubrigante - TGR Jane v2 CE - Matrix Lab 8XV1.2 OG

Offline loud_asian

  • Posts: 579
Re: [GB] Fox Lab - Leaf 60
« Reply #640 on: Thu, 09 May 2019, 13:31:51 »
Looking for a mx pc plate for wkl layout. LMK if you've got one!

Offline finalarcadia

  • Posts: 232
Re: [GB] Fox Lab - Leaf 60
« Reply #641 on: Thu, 09 May 2019, 19:08:21 »
Umm anyone else's polycarb case won't open up even after removing screws? Dunno what's going on lol

NVM opened it

Offline fireworm

  • Posts: 423
Re: [GB] Fox Lab - Leaf 60
« Reply #642 on: Thu, 09 May 2019, 19:17:51 »
Umm anyone else's polycarb case won't open up even after removing screws? Dunno what's going on lol

NVM opened it

The top piece is just a little warped, so it hugs the sides tighter.  I was also confused for a solid minute...   :p

Offline vonswoopington

  • Posts: 186
Re: [GB] Fox Lab - Leaf 60
« Reply #643 on: Thu, 09 May 2019, 23:33:29 »
Anyone have recommendations for led strips? Also, where is it soldered to on the PCB?  Thanks!
TGR 910 Polycarb | TGR Alice | TGR Unikorn | Lyn EM-7 | VE.A | Kyuu | E7-V1

Offline yicaoyimu

  • Posts: 1069
  • Location: San Jose, CA
Re: [GB] Fox Lab - Leaf 60
« Reply #644 on: Fri, 10 May 2019, 02:14:19 »
Itís probably a long shot, but if anyone in CONUS with MX brass plate that are looking to sell or to trade for PC universal plate, PM me.
360 Corsa - KMAC2 - Duck Blackbird - LZ Iron  - Matrix Abel - Matrix Lab 8XV2.0 - Fox Leaf 60 - Lubrigante - TGR Jane v2 CE - Matrix Lab 8XV1.2 OG

Offline geewizwow

  • Posts: 27
  • Location: Sunny Scotland
Re: [GB] Fox Lab - Leaf 60
« Reply #645 on: Fri, 10 May 2019, 03:35:29 »
Can we get an update on shipping status Senter ? Still not received a text

Offline dantambok

  • Posts: 870
  • Location: Philippines
Re: [GB] Fox Lab - Leaf 60
« Reply #646 on: Fri, 10 May 2019, 04:56:01 »
Can we get an update on shipping status Senter ? Still not received a text

Not everyone got texts. So they might just magically appear :))
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / 2x Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 3x TGRxSinga Unikorn / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / Rukia / 2x FMJ80 / TGR Jane V2 CE / UTD 360C / Matrix Project F / IDB60 / is0 

Coming soon --  MXSS / Modern M0110 / PC HBCP / Noxary 280S / Noxary XRF / LZ PhysiX / Keycult 1/60 rev1 / Lynx50 / Matrix 2.0 OG / 2x GSKT-00 / Duck Viper v3 / FLX Virgo / Noxary Vulcan Pro

40 ish sets and 30ish sets in GB

Offline victorpre

  • Posts: 96
Re: [GB] Fox Lab - Leaf 60
« Reply #647 on: Fri, 10 May 2019, 06:20:58 »
Anybody willing to pass their leaf60?

Sent from my Pixel 2 XL using Tapatalk


Offline Furikurichemy

  • Posts: 148
Re: [GB] Fox Lab - Leaf 60
« Reply #648 on: Fri, 10 May 2019, 06:32:31 »
Can we get an update on shipping status Senter ? Still not received a text

I got a text after they failed to deliver it to my address because I wasn't there  :(. So it will probably magically appear before you get any notification.

Offline Dennyroxsox

  • Posts: 79
  • a.k.a. Lollipopsaurus
Re: [GB] Fox Lab - Leaf 60
« Reply #649 on: Fri, 10 May 2019, 08:51:44 »
I've seen a lot of pics of these, and they look great! I'm kind of jealous I didn't get in on this one!