Author Topic: [IC] Argyle - 60% Through-hole Keyboard  (Read 67533 times)

0 Members and 1 Guest are viewing this topic.

Offline Seoulcialite

  • Thread Starter
  • Posts: 83
  • Location: Seoul, South Korea
    • MechSeoul
[IC] Argyle - 60% Through-hole Keyboard
« on: Fri, 08 May 2020, 14:05:15 »
Do you love through-hole keyboards? Wish there was a more premium option? If you’ve answered yes, I may have a keyboard for you! I present to you, Argyle.

IC Form

Please take a minute to fill it out. If this goes to GB, most likely only the most popular 2 or 3 options will be offered.

Features:
  • 8 degree typing angle
  • Aluminum housing
  • Visible through-hole components
  • RGB LEDs for the side partitions
  • Top mounted plate
  • QMK/VIA
  • USB-C
Renders:

Rendered by Abec















Additional Renders:
More













PCB and Silkscreen:



The argyle patterns of the bottom corners needs no explanation. Love it or hate it? Let me know in the IC form. As for the logo on the top-right, I have been thinking about becoming a vendor serving Asia for some time now. It is still under consideration but I have put in some legwork including a name, MechSeoul, and a logo. Even if I decide to not go the vendor route, the logo is something I decided to place on my current and any future designs. It features N-Tower, an iconic communications tower located in the center of Seoul.

Supported Layouts:



Vendors:

  • EU: ProtoTypist
  • Others: to be determined

Pricing and MOQ:

To be determined

Colors and Options:
  • Housing Colors: black, white (other options to be determined)
  • PCB Colors: to be determined
  • Tops: standard (possibly WKL and HHKB)
  • Plates: aluminum (other options to be determined)
  • Window: acrylic or glass
Design:

I love the through-hole keyboards out there but I wanted one with a metal housing. So, I employed the wonderful team at ProtoTypist (Jae: logistics and fulfillment, James: housing design, Yiancar: PCB design) to make my idea into a reality. To give it’s own flavor and to give a better view of the components, the components were split to the sides of the keyboard. The relatively high typing angle was also chosen to increase the visibility of the components. Even though 65% is my favorite layout by far, I couldn’t pass up the opportunity to match the symmetry of the housing with the symmetry of the 60% layout. Because the focus of the keyboard is the side partitions, the rest of the design was kept relatively simple.

To-do:
  • Get prototype PCBs (Built and tested)
  • Get prototype housing (Currently with Jae for fitment testing)
  • Finalize vendors
  • Finalize details (MOQ, colors, options, pricing)
Possible Concerns:
  • Sound: The hollow space in the side partitions may negatively affect the sound (but can probably be easily remedied with foam if that's the case)
  • Illumination: The LEDs may not illuminate the entirety of the partition in a satisfactory way.

FAQ:

Q: How are the see-through panels held in place?

A: There are grooves for rubber/foam which will hold up the panels. The grooves can be seen in some of the renders if you look closely.

Q: How are the side partitions illuminated?

A: The image of the PCB shows the location of 10 RGB LEDs. These LEDs will shoot light up into a diffuser which will direct light off to the sides. One side of the diffuser is blocked off to prevent light bleed through the switch plate. A simple render of the implementation can be seen here:
More



Q: Could you add an bluetooth, OLED, rotary encoder, T-bar fader, fingerprint reader, and/or flux capacitor?

A: If the response of the IC/GB is positive, the GB runs smoothly, and the desire for a R2 is high, ideally I would add more features in future rounds. The design team and I already had to put our minds together to tackle a few obstacles such as elegant way to hold the panels in place and to light up the interior of the side partitions. More features means a higher chance something will fail or not be adequate. So, I'm starting simple now but I'm open to add more features in any future rounds.

Banner:

Show your support by adding the following to your signature:
Code: [Select]
[url=https://geekhack.org/index.php?topic=106255.0][img width=480 height=120]https://imgur.com/gOc9crW.png[/img][/url]
« Last Edit: Tue, 01 September 2020, 12:40:43 by Seoulcialite »

Offline Seoulcialite

  • Thread Starter
  • Posts: 83
  • Location: Seoul, South Korea
    • MechSeoul
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #1 on: Fri, 08 May 2020, 14:05:47 »
(Reserved)

Offline ab042896

  • Posts: 64
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #2 on: Fri, 08 May 2020, 14:15:11 »
Woah, this is definitely a more sophisticated take on a through hole board, I like it!

Offline fropsie

  • Posts: 116
  • Location: Boston, MA
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #3 on: Fri, 08 May 2020, 14:16:56 »
Yes.

Offline singabore

  • Posts: 57
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #4 on: Fri, 08 May 2020, 14:18:48 »
poggies

Offline PvtSkittles

  • Posts: 44
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #5 on: Fri, 08 May 2020, 14:21:10 »
I need it.

Offline donut_sauce

  • Posts: 386
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #6 on: Fri, 08 May 2020, 14:23:24 »
that is awesome

Offline Fredington

  • Posts: 303
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #7 on: Fri, 08 May 2020, 14:30:24 »
HHKB please.

Offline naked_and_jameson

  • Posts: 18
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #8 on: Fri, 08 May 2020, 14:33:59 »
Wow, amazing. Love it. I'll be in on this.

Offline ttom

  • Formerly tvaro
  • Posts: 350
  • Location: United Kingdom
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #9 on: Fri, 08 May 2020, 14:43:37 »
I love this, great work

Offline huey

  • Posts: 100
  • Location: UK
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #10 on: Fri, 08 May 2020, 14:58:05 »
Nice. Thank you for adding ISO support, the bottom engraving is fantastic, the silk-screen is classy and well done, and the overall minimal design is lovely.

Some form of PCB mount would make this board for me.

The renders do make it look silver to me though, I know it should be white but eh.

Also, how are the "glass" panels going to be mounted? It seems like the most fragile part of the design, while easy to replace, it's durability concerns me.
« Last Edit: Fri, 08 May 2020, 15:01:27 by huey »

Offline badboy731

  • Posts: 66
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #11 on: Fri, 08 May 2020, 15:16:10 »
I was just wondering what this board was from the renders I've seen. Glad to see an IC for it!
E7-V1 | TGR Jane v2 CE | HBCP | GSKT-00 | Raine | AOS

Offline Seoulcialite

  • Thread Starter
  • Posts: 83
  • Location: Seoul, South Korea
    • MechSeoul
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #12 on: Fri, 08 May 2020, 15:21:25 »
Nice. Thank you for adding ISO support, the bottom engraving is fantastic, the silk-screen is classy and well done, and the overall minimal design is lovely.

Some form of PCB mount would make this board for me.

The renders do make it look silver to me though, I know it should be white but eh.

Also, how are the "glass" panels going to be mounted? It seems like the most fragile part of the design, while easy to replace, it's durability concerns me.

First keyboard IC so I thought I'd keep it simple with top-mount. GMK Shoko has been rendered with silver housing.

There will be grooves to hold foam that will in turn hold up the panels. So, the panels are kind of gasket mounted? haha. Thought about putting gasket mount in the title but thought that would be too bait and switch. lol.

Offline neon_tom

  • Posts: 234
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #13 on: Fri, 08 May 2020, 16:49:53 »
Love this

Offline Magnificent Bureaucrat

  • Posts: 32
  • Sooooo much red tape
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #14 on: Fri, 08 May 2020, 18:07:57 »
Odds on this is going to be out of the question for me finance wise, but this looks so freakin' good.

I live in hope of a cheap version of this premium version of the cheap through-holes :)

Offline phat schlong

  • Posts: 25
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #15 on: Fri, 08 May 2020, 18:36:39 »
I love this. Definitely interested.

Offline worldspawn

  • Posts: 324
  • Location: Austin, TX
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #16 on: Fri, 08 May 2020, 18:37:09 »
What's the intent with the I2C header?  If you rearranged the pins so it is GND 5v SCK SDA, one could install an OLED in that location as well.

I can make acrylic laser cut cases/plates PM for info

Offline hottrout

  • Posts: 932
  • Location: Norn Iron
  • I'd Hit Dat Key
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #17 on: Fri, 08 May 2020, 18:42:32 »
Quirky but quite cool.  Could make a great gaming board.  Will there be any lighting on the sides?
Current Daily Driver : Maja Ergo - Kiwi

Systems
More
Work |i9-7940x@4.8ghz|32GB(3600)|RTX 2080Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-9900k@5GHz|16GB(3200)|STRIX-RTX2080Ti|EK Closed Water Loop|Z390-F|1TB 960 Pro|1TB 980 Pro|Dell AW3418DW|NEC MultiSync|Rode NT1&AI-1|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 35 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software, games and manuals. 100's of systems including every Amiga model made

Keyboards
More
IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Vintage Cherrys (1982 onwards, just about all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL |  Filco Majistouch | KBDFans 5degree - Chocolate | Rama M6-B - Grey | CA66 Silver | ClueBoard Graphite/PC | Varmilo VA69M Silver | E7-V1 SE Yellow | Rama U-80 Space Grey | VN66 Navy | BOCC Frosted Polycarbonate | Rama M10-C Midnight | FLX Virgo Teal & Black | Rama M60-A LYN Kuro | Space65 CyberVoyager WhiteGold | Space65 CyberVoyager Terminal | Clarabelle Sandblasted Polycarbonate | Elongate Mini 1800 Blue | Petrichor 1800 Red | Vulcan Maja Ergo Green | Think6.5v2 RoboCop | Jacky Bear 65% E-White | Sakabato CB87 TKL Champagne | KCK KY-01 Aquamarine | Jae J-01 F&F E-White & Copper | S7.7 E-White | The Adélie Blue | NIX OxalyS80 LE Dark Polycarbonate | Mesa TKL E-White | F&F Smith & Rune IRON180 Graen/Brass | Skog Reboot Desert | CU7 Black | ROTR Silver & Copper | RAMA Kara Soya | Grid 650 E-White | SIX5 LE Aluminium & Gold |

Offline Zeelobby

  • Posts: 762
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #18 on: Fri, 08 May 2020, 19:09:12 »
Very nice. Wish I didn't have so many 60s already coming. But definitely cool.

Offline FRANCO

  • Posts: 86
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #19 on: Fri, 08 May 2020, 19:18:52 »
Would there be space to install a rotary encoder?

Offline abstractkb

  • Posts: 25
    • Abstract Keyboards Homepage
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #20 on: Fri, 08 May 2020, 19:55:50 »
Wow, this is such an interesting design.  Do you have an idea of how the clear windows would mount inside the case?

Offline GarrettSucks

  • Posts: 270
  • Location: Huntsville, Alabama
  • Stay updated w/ our projects at news.dixiemech.com
    • Dixie Mech
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #21 on: Fri, 08 May 2020, 20:18:14 »
This idea is really cool. But I don’t think you should have argyle on the PCB. It really forces a distinct design style to the board that will clash with tons of keyset styles.

Offline DuellM

  • Posts: 248
  • Location: Brooklyn
  • Keyboard Fatty
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #22 on: Fri, 08 May 2020, 20:45:42 »
So Many Awesome Keyboards coming out. Can't wait for this


Offline i luv chuletas

  • Posts: 237
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #23 on: Sat, 09 May 2020, 00:37:35 »
Wow, this looks amazing. A WKL version of this would be a must buy for me!

Offline Seoulcialite

  • Thread Starter
  • Posts: 83
  • Location: Seoul, South Korea
    • MechSeoul
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #24 on: Sat, 09 May 2020, 02:07:54 »
This idea is really cool. But I don’t think you should have argyle on the PCB. It really forces a distinct design style to the board that will clash with tons of keyset styles.

That's a good point. I will add a question to the IC form to see how others feel about it.

Quirky but quite cool.  Could make a great gaming board.  Will there be any lighting on the sides?


Yes. This has been mentioned in the original post. In the PCB image I have posted, you can see 4 LEDs per side. These LEDs will be shooting up into a diffuser. The diffusers will be blocked on one side to prevent light bleed through the switch plate.

What's the intent with the I2C header?  If you rearranged the pins so it is GND 5v SCK SDA, one could install an OLED in that location as well.

Show Image


As I only commissioned the design, I do not know the intent of the I2C header.

An OLED would be a great idea. However, I'm afraid I would not want to add it currently. If there is a 2nd round, it would definitely be considered.

Would there be space to install a rotary encoder?

Rotary encoder will not be considered at this time and round.

« Last Edit: Sat, 09 May 2020, 04:03:27 by Seoulcialite »

Offline Seoulcialite

  • Thread Starter
  • Posts: 83
  • Location: Seoul, South Korea
    • MechSeoul
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #25 on: Sat, 09 May 2020, 02:15:57 »
Wow, this is such an interesting design.  Do you have an idea of how the clear windows would mount inside the case?

This has been answered in a previous post:

There will be grooves to hold foam that will in turn hold up the panels. So, the panels are kind of gasket mounted? haha. Thought about putting gasket mount in the title but thought that would be too bait and switch. lol.

Odds on this is going to be out of the question for me finance wise, but this looks so freakin' good.

I live in hope of a cheap version of this premium version of the cheap through-holes :)

If you look closely at the PCB picture, there are 6 holes that can be used to screw into a back plate. So, it's a possibility it may be offered as a kit at a much later date.
« Last Edit: Tue, 12 May 2020, 12:28:21 by Seoulcialite »

Offline Kalibrrr

  • Posts: 5
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #26 on: Sat, 09 May 2020, 02:41:11 »
I'm in for this one for sure

Offline beekey

  • Posts: 419
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #27 on: Sat, 09 May 2020, 03:52:28 »
This is so nice. I love the look of nice electronic designs. I hope I can get one.

Are there other "good looking" electronic parts which could be added to the bottom corners, replacing the pattern? Copper coils (https://www.alibaba.com/product-detail/Copper-wire-wound-coil-for-PCB_904687178.html, no function, just for the looks?

Or how about (a) rotary encoder(s)? Saw the previous answer.
« Last Edit: Sat, 09 May 2020, 03:58:32 by beekey »

Offline L-Ron

  • Posts: 18
  • Location: Australia
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #28 on: Sat, 09 May 2020, 04:08:27 »
I've been hoping for a premium through-hole board ever since I saw the Plaid. Love this, definitely in for one.

Offline equalunique

  • Posts: 538
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #29 on: Sat, 09 May 2020, 14:38:38 »
Fantastic concept.

I try to stay away from 60% unless there is a 1x5 macro column to the left, or a 2x5 macro column in the case of 65%. Something about not having G & H in the center bothers me.

Offline worldspawn

  • Posts: 324
  • Location: Austin, TX
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #30 on: Sat, 09 May 2020, 19:45:30 »

What's the intent with the I2C header?  If you rearranged the pins so it is GND 5v SCK SDA, one could install an OLED in that location as well.

Show Image


As I only commissioned the design, I do not know the intent of the I2C header.

An OLED would be a great idea. However, I'm afraid I would not want to add it currently. If there is a 2nd round, it would definitely be considered.




I'm not suggesting you add the OLED, I'm suggesting you slightly change the pin arrangement so others can.
I can make acrylic laser cut cases/plates PM for info

Online Shutter_Shock

  • Posts: 267
  • Location: Seattle, WA, USA
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #31 on: Sat, 09 May 2020, 20:46:54 »
This idea is really cool. But I don’t think you should have argyle on the PCB. It really forces a distinct design style to the board that will clash with tons of keyset styles.

+1.

Honestly, I end up never using 60%'s because I miss the arrow keys too much. If I have the cash to burn when the GB goes live, I'll definitely consider it. Or if there is a 65% version in the future, I'm in. Best of luck!!

Offline blizzara01

  • Posts: 160
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #32 on: Sat, 09 May 2020, 21:08:07 »
Isn't acrylic is easily to scratch? Glass would be better I think.

Offline Visionaire

  • Posts: 507
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #33 on: Sun, 10 May 2020, 15:49:50 »
Would love to have those side compartments lit up at night.
Fan of Duck keyboards? Join our Discord server! https://discord.gg/f278P6w

Offline oldcat

  • Posts: 2630
  • Location: US
  • 65% is Life
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #34 on: Sun, 10 May 2020, 15:51:36 »
this is very interesting!

Offline mongoose27

  • Posts: 28
  • WKL is life
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #35 on: Sun, 10 May 2020, 15:54:23 »
Very nice, I'm liking this.

Offline vewy_nice

  • Posts: 312
  • Location: NH, USA
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #36 on: Sun, 10 May 2020, 16:33:48 »
Mmmm classic green pcb would be so spicy

Also would look good with some "useless" components in there. Like a few electrolytic capacitors or something... You know just cuz.

Offline switchnollie

  • sleever supreme
  • * Exquisite Elder
  • Posts: 1547
  • Location: 白い帽子
  • greyhat co-leader
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #37 on: Sun, 10 May 2020, 16:50:00 »
Sweet concept, one of the cleanest in this genre I've seen :cool:


Keyboards: OTD 356CL Dark Greyhat Edition, baybee!

Offline hownowbrowncow

  • Posts: 3
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #38 on: Mon, 11 May 2020, 01:31:48 »
Just set aside money for this. +1 for glass windows

Offline pixelpusher

  • * Elevated Elder
  • Posts: 3649
  • Location: Tennessee - USA
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #39 on: Mon, 11 May 2020, 01:59:24 »
It looks cool, but what the heck are those chips on the left and the right?  I've never seen anything in a package like that on a modern keyboard.  Are they just for looks or are those actual processors?

Offline Seoulcialite

  • Thread Starter
  • Posts: 83
  • Location: Seoul, South Korea
    • MechSeoul
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #40 on: Mon, 11 May 2020, 03:14:51 »
Isn't acrylic is easily to scratch? Glass would be better I think.

To be determined. In any event, dimensions of the panels would be shared at a later date so that people may get acrylic or glass panels in different tint/color cut locally/online.

It looks cool, but what the heck are those chips on the left and the right?  I've never seen anything in a package like that on a modern keyboard.  Are they just for looks or are those actual processors?

This is a different take on the through-hole keyboards kits out there like the gingham, plaid, discipline, etc. All the components you see are functional. To my knowledge, the left chip handles the matrix and the right handles the LED lighting.

This is so nice. I love the look of nice electronic designs. I hope I can get one.

Are there other "good looking" electronic parts which could be added to the bottom corners, replacing the pattern? Copper coils (https://www.alibaba.com/product-detail/Copper-wire-wound-coil-for-PCB_904687178.html, no function, just for the looks?

I will not be adding anything that doesn't have a function to the board.
« Last Edit: Mon, 11 May 2020, 03:16:29 by Seoulcialite »

Offline paulgali

  • Posts: 59
  • Location: Dubai, UAE
  • Taco Baul can't find good tacos
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #41 on: Mon, 11 May 2020, 03:43:52 »
This is actually nuts. Love it!

Offline konstantin

  • Formerly constexpr
  • Posts: 1524
  • Location: Serbia
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #42 on: Mon, 11 May 2020, 06:11:30 »
It looks cool, but what the heck are those chips on the left and the right?  I've never seen anything in a package like that on a modern keyboard.  Are they just for looks or are those actual processors?

This is a different take on the through-hole keyboards kits out there like the gingham, plaid, discipline, etc. All the components you see are functional. To my knowledge, the left chip handles the matrix and the right handles the LED lighting.

You are correct. Going off of Yiancar's previous designs, the left chip is an ATmega328 microcontroller (MCU), which does all of the keyboard work like matrix scanning, interpreting keycodes, communicating with the host, sending scancodes via USB etc. The right chip is an I/O port expander, which is used to allow the MCU to control the LED lighting since the MCU itself doesn't have enough GPIO pins (it has barely just enough for the key matrix).

Offline ephemeral25

  • Posts: 53
  • Location: Paris, France
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #43 on: Mon, 11 May 2020, 08:38:01 »
I am so IN.

Big fan of displaying smd components.
HHKB Hybrid Type-S | Black Singa Jaguar | Electrotype 87 Bifrost | Hex 3.C | Discipline65 | M0118 ISOFR Orange Alps | Fortune 32:16 Digitran | Space65 EVA

Offline hkiri

  • Posts: 195
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #44 on: Mon, 11 May 2020, 08:46:37 »
Always have been a fan of those through hole kits and how they present the components on the top, but I never really liked the fact that they are missing a case.
This is definitely a must buy for me!

Offline Seoulcialite

  • Thread Starter
  • Posts: 83
  • Location: Seoul, South Korea
    • MechSeoul
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #45 on: Mon, 11 May 2020, 09:59:27 »


Prototype PCBs are in. But I'm still waiting for the components to arrive.

« Last Edit: Wed, 05 August 2020, 11:19:49 by Seoulcialite »

Offline kedayap

  • Posts: 5
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #46 on: Mon, 11 May 2020, 10:59:14 »
Just take my money already.

Offline TEL_Venom

  • Posts: 4
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #47 on: Mon, 11 May 2020, 11:13:39 »
Love this!

Offline valkyr1e

  • Posts: 41
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #48 on: Mon, 11 May 2020, 11:20:02 »

Online Rob27shred

  • Posts: 1129
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #49 on: Mon, 11 May 2020, 11:35:52 »
Definitely a very interesting & great looking board! I'd be down for one for sure! I love the ideal of a premium board with the exposed diode look.
Official judge of the first annual Kei toss

Offline Lazy_Borzoi

  • Posts: 36
  • Location: US
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #50 on: Mon, 11 May 2020, 11:41:54 »
Definitely interested.
Can you tell us if it's going to be an limited or unlimited GB?

Offline nathanchere

  • Posts: 549
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #51 on: Mon, 11 May 2020, 16:27:53 »
I'd be in for a HHKB layout if the price is reasonable

Offline saqneo

  • Posts: 6
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #52 on: Mon, 11 May 2020, 16:42:12 »
I hear what you're saying about the mod symmetry but I'd love to see this on a tight 65% layout (arrow key blocker only). Unfortunately I just can't bring myself to use 60%s anymore.

Offline pixelpusher

  • * Elevated Elder
  • Posts: 3649
  • Location: Tennessee - USA
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #53 on: Mon, 11 May 2020, 16:43:50 »
Show Image


Prototype PCBs are in. But I'm still waiting for the components to arrive. Pending no issues with the PCB, after I build one, I'll most hold a raffle for 3 of them for free (not including shipping) with a backplate, components, and spacers through an event (most likely Instagram like & tag).

awe snap, I didn't see that it was Alps compatible.  Okay.  I'm in.

Offline PvtSkittles

  • Posts: 44
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #54 on: Mon, 11 May 2020, 17:04:06 »
I would also prefer not having the argyle pattern printed on the PCB.

Offline pixelpusher

  • * Elevated Elder
  • Posts: 3649
  • Location: Tennessee - USA
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #55 on: Mon, 11 May 2020, 17:10:19 »
I would also prefer not having the argyle pattern printed on the PCB.

Make sure you fill out the IC form in the Original post.  There is a section where you can tell him that.

Offline octix

  • Posts: 141
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #56 on: Mon, 11 May 2020, 19:00:40 »
Remember seeing a render of this before. I’m so in for this!


Discord: octix#0478

Offline Eviscerae

  • Posts: 7
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #57 on: Tue, 12 May 2020, 09:30:51 »
For us HHKB fans, Can you move the 1.5U left shift over to the right, exchanging places with the 1U key?  It would make an HHKB layout very symmetrical, and quite possibly improve on that design even more!
« Last Edit: Tue, 12 May 2020, 09:32:36 by Eviscerae »

Offline onmybikedrunk

  • Posts: 234
  • Location: Portland, OR
    • Danny Woods - Industrial Designer
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #58 on: Tue, 12 May 2020, 11:27:51 »
Amazing.  I’m in.

Offline HannibalChew

  • Formerly PixelScript
  • Posts: 108
  • Location: UK
    • gaffworks
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #59 on: Tue, 12 May 2020, 15:49:31 »
Love this. Would love it more with a HHKB layout. :thumb:

Offline CrlaoSvloadr

  • Posts: 30
  • Location: Canada
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #60 on: Tue, 12 May 2020, 21:56:50 »
Very clean! Looking for updates to come :)

Offline sugar.tea.milk

  • Posts: 8
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #61 on: Tue, 12 May 2020, 23:57:05 »
I was thinking that the black one would make a nice office keyboard, and then I saw additional renders for white with red PCB!
Both options look so nice, it's quite hard to choose between the two.  :thumb:

Offline vaf1en

  • Posts: 77
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #62 on: Wed, 13 May 2020, 13:50:51 »
Think I need two of these, one white with red PCB and one navy with white PCB.  :-X

Offline scatology

  • Posts: 77
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #63 on: Wed, 13 May 2020, 14:55:09 »
Does the case have a seam? The renders don't show it but the bottom makes me think it has one. I like the design but I don't buy keyboards with seams because I don't really like it unless the designs is amazing like this one! haha.
« Last Edit: Fri, 03 July 2020, 12:41:19 by scatology »

Offline Seoulcialite

  • Thread Starter
  • Posts: 83
  • Location: Seoul, South Korea
    • MechSeoul
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #64 on: Wed, 13 May 2020, 15:31:20 »
Definitely interested.
Can you tell us if it's going to be an limited or unlimited GB?

It will be limited. The details and options are still being hashed out but you can probably expect 100 to 200 units. Most likely right in the middle at around 150.

Does the case have a seam? The renders don't show it but the bottom makes me think it has one. I like the design but I don't buy keyboards with seams because I don't like it.

Yes, it has a seam.


What's the intent with the I2C header?  If you rearranged the pins so it is GND 5v SCK SDA, one could install an OLED in that location as well.

Show Image


As I only commissioned the design, I do not know the intent of the I2C header.

An OLED would be a great idea. However, I'm afraid I would not want to add it currently. If there is a 2nd round, it would definitely be considered.




I'm not suggesting you add the OLED, I'm suggesting you slightly change the pin arrangement so others can.

The pin arrangement has been changed. But since it was not in the scope of the commission, OLED functionality will not be provided by us. Hopefully someone in the community can.

Offline Lazy_Borzoi

  • Posts: 36
  • Location: US
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #65 on: Wed, 13 May 2020, 18:08:58 »
Definitely interested.
Can you tell us if it's going to be an limited or unlimited GB?

It will be limited. The details and options are still being hashed out but you can probably expect 100 to 200 units. Most likely right in the middle at around 150.




Thank you for your answer. I hope you will consider to raffle the GB spots and not FCFS. I feel like at least with the raffle, everyone has got the same chance. I can't compete with bots in the FCFS format. I tried joining many GBs that were limited and never got in. Not once.
« Last Edit: Wed, 13 May 2020, 19:19:58 by Lazy_Borzoi »

Offline fluxlab

  • Posts: 29
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #66 on: Thu, 14 May 2020, 01:21:38 »
Best design of this style I've seen man. Just wish an ortho version is available..

Sent from my ONEPLUS A5010 using Tapatalk


Offline markclemmons

  • Posts: 8
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #67 on: Tue, 19 May 2020, 02:58:26 »
Love this one

Sent from my Pixel 4 XL using Tapatalk


Offline Dyto69

  • Posts: 4
  • Location: Germany
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #68 on: Tue, 19 May 2020, 03:33:46 »
Oh yes, i really want that to happen. Definetly one of the coolest 60% that i saw.

Offline timbuktew

  • Posts: 1
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #69 on: Wed, 20 May 2020, 15:04:53 »
Super into this, really hope it happens!

Offline izroll

  • Posts: 5
  • Location: Atlanta, GA
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #70 on: Wed, 20 May 2020, 17:26:05 »
Love it! Praying to the raffle gods in advance.

Offline mongoose27

  • Posts: 28
  • WKL is life
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #71 on: Wed, 20 May 2020, 17:39:10 »
Very interested in this one!

Offline ackzot

  • Posts: 41
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #72 on: Wed, 20 May 2020, 18:02:09 »
love the design aesthetic, especially the black. it's longer lengthwise than most 60s, so feels a little counter intuitive in terms of working against one of the benefits of a 60 keyboard.

still debating as it feels more like show piece than a daily driver, but at least it presents a 60 keyboard that is visually striking compared to others.

Offline diddykang

  • Posts: 24
  • Location: Illinois
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #73 on: Wed, 20 May 2020, 21:10:51 »
Love the design. Def interested.. would kill for an orange/yellow housing.

Offline ilikerustoo

  • Posts: 98
  • Location: NJ, USA
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #74 on: Thu, 21 May 2020, 01:21:15 »
I'm in

Offline Seoulcialite

  • Thread Starter
  • Posts: 83
  • Location: Seoul, South Korea
    • MechSeoul
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #75 on: Thu, 21 May 2020, 06:09:14 »
love the design aesthetic, especially the black. it's longer lengthwise than most 60s, so feels a little counter intuitive in terms of working against one of the benefits of a 60 keyboard.

still debating as it feels more like show piece than a daily driver, but at least it presents a 60 keyboard that is visually striking compared to others.

No denying that the main focus of this keyboard is the through-hole aesthetics. The other through-hole kits like the plaid, discipline, and gingham are the same. There's no real reason for the components to be in a separate area unless it is to give some visual impact. The Argyle is just taking that a step further. So, yes, the design is not functional, but I hope to deliver a more premium feel than simple sandwich mount PCB kits while keeping the aesthetics.

Thank you for your answer. I hope you will consider to raffle the GB spots and not FCFS. I feel like at least with the raffle, everyone has got the same chance. I can't compete with bots in the FCFS format. I tried joining many GBs that were limited and never got in. Not once.

The plan is to have multiple vendors. And it is easiest for them to simply do a FCFS format GB. If the first GB is successful, I would be love to have additional rounds.
« Last Edit: Thu, 21 May 2020, 11:02:45 by Seoulcialite »

Offline rmw2013

  • Posts: 12
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #76 on: Thu, 21 May 2020, 16:55:10 »
Really hope we get to see multiple PCB colors

Sent from my ONEPLUS A3000 using Tapatalk


Offline d00deitsnik

  • Posts: 212
  • Location: San Francisco, CA
  • Grails: SA Olivia, 1800 w/ only Latriualum keycaps
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #77 on: Fri, 22 May 2020, 04:00:34 »
This looks super cool. I'd be willing to use it as a daily driver because of its aesthetics.

Offline IvernTheTree

  • Posts: 6
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #78 on: Sun, 24 May 2020, 02:51:19 »
Can there be more renders of the pcb color options? I am so hyped cuz this will be my first build <3 :D

Offline BaltO

  • Posts: 9
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #79 on: Mon, 25 May 2020, 01:31:03 »
actually beautiful

Offline roguesystem087

  • Posts: 104
  • Location: Hong Kong
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #80 on: Mon, 25 May 2020, 06:57:41 »
pretty cool! hope this makes it to GB!
| Rama U80-A | Cypher F-rowless 1800 | Austin R2 |Satisfaction75 R2 |

Offline amperrsand

  • Posts: 59
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #81 on: Tue, 26 May 2020, 17:17:52 »
I didn't even know through-hole keyboards (or the see-through part moreso, not the through-hole part) was even a "genre" of keyboard. Idk if I'll be able to buy this, but it's slick as hell, man.

Offline Rök

  • Posts: 4
  • Location: Montreal, Canada
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #82 on: Wed, 27 May 2020, 17:07:16 »
Definitely interested!

Offline GaNeBaL

  • Posts: 72
  • Location: Toronto
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #83 on: Fri, 29 May 2020, 11:49:26 »
would love to see this board, also, any more info on plates? would love to see a halfplate
Obsessed with 60%

Offline DALExSNAIL

  • The User Formerly Known as 'Formerly DudeSnail'
  • * Esteemed Elder
  • Posts: I am a geek!!
  • Location: Myrtle Beach, SC
  • 𝖋𝖚𝖈𝖐 𝖆𝖑𝖕𝖘
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #84 on: Fri, 29 May 2020, 11:55:58 »
Simon told me this is good
So I am in.

Offline maximize

  • Posts: 155
  • Location: The Land of 10,000 Lakes
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #85 on: Fri, 29 May 2020, 18:45:14 »
Holy hell, this is beautiful.

Offline chickenballs

  • Posts: 9
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #86 on: Sun, 31 May 2020, 10:09:43 »
I think you said you might do a 65 and 75% after the 60%, I'm sure it's very hard to estimate times but can you guestimate when would they be available ? If I have to wait like 1-2years to get the other version then I might just jump on the 60 lol

Sent from my Pixel 3 using Tapatalk


Online Rob27shred

  • Posts: 1129
  • Location: Pittsburgh, PA
  • Insane in the Membrane! 👻
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #87 on: Sun, 31 May 2020, 10:50:33 »
Show Image


Prototype PCBs are in. But I'm still waiting for the components to arrive. Pending no issues with the PCB, after I build one, I'll most hold a raffle for 3 of them for free (not including shipping) with a backplate, components, and spacers through an event (most likely Instagram like & tag).

awe snap, I didn't see that it was Alps compatible.  Okay.  I'm in.

Wait wut, ALPS..... yeah I'm in for sure now too!
Official judge of the first annual Kei toss

Offline Seoulcialite

  • Thread Starter
  • Posts: 83
  • Location: Seoul, South Korea
    • MechSeoul
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #88 on: Sun, 31 May 2020, 11:59:41 »
I think you said you might do a 65 and 75% after the 60%, I'm sure it's very hard to estimate times but can you guestimate when would they be available ? If I have to wait like 1-2years to get the other version then I might just jump on the 60 lol

Sent from my Pixel 3 using Tapatalk

I'm sorry. I really can't say. It depends on many different factors.

A shortened but not so short version: The design for the 65% isn't going to start until the 60% GB is over. First, a prototype for the 60% needs to be approved by Jae (of Prototypist) and I. Also, we'd need to find a date range that all the vendors can agree on to run the GB. After the 60% GB ends, then would come the design phase of the 65%. I haven't given too much thought on what changes I'd make if any for the 65% version other than the layout. After the design is completed and approved, we'd go to prototype phase. Again, a proto would need to be approved before GB for the 65%.

Any time estimate I give now would just really be a random guess. This would be my first keyboard GB and it really has given me a lot of insight in how complicated the process is.

Offline wolfez4444

  • Posts: 15
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #89 on: Tue, 02 June 2020, 07:30:02 »
Absolutely love this design! I'm in!

Offline scie

  • Posts: 6
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #90 on: Tue, 02 June 2020, 08:35:59 »
As a newbie to this  :-[ I have to ask what is the purpose of the I2C header and what could I do with it? Besides that, it is a really nice looking board and maybe that would be my first gb.

Offline Beef Supreme

  • Posts: 4
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #91 on: Thu, 04 June 2020, 10:41:09 »
Beautiful design! I also like the idea of lighting up the components with an LED.

Offline dudeship

  • Posts: 17
  • Location: uk
  • co-designer of kat great wave | zdc
    • dudeship.mk
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #92 on: Thu, 04 June 2020, 12:00:09 »
This is awesome, will you ever make a 75% version?
[/url]

Offline MShaw09

  • Posts: 1
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #93 on: Fri, 05 June 2020, 15:07:22 »
Saw this board and decided to finally make an account instead of lurking for so long...
Are there any ways other than GH to stay updated with the progress, like a discord server? Definitely don't want to miss this one!

Offline Cold Hands

  • Posts: 1
  • Location: Toronto
  • Good for health 💊 Bad for education
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #94 on: Mon, 08 June 2020, 01:21:34 »
I need this in my life please

Offline x86ect

  • Posts: 65
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #95 on: Mon, 08 June 2020, 09:08:05 »
Hey Seoulcialite, not sure if it's too late for this but, would it be possible to put an LED beside each one of the diodes and have the LED light up when electricity flowed through it?

Edit: Hmmm... perhaps it would make the sides too wide.
« Last Edit: Mon, 08 June 2020, 09:16:17 by x86ect »

Offline TheHMan

  • Posts: 4
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #96 on: Mon, 08 June 2020, 19:40:09 »
Is there a discord for updates?

Offline Zoba

  • Posts: 3
  • Location: okaga, ca
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #97 on: Mon, 08 June 2020, 22:22:57 »
Love the look of this!

Offline Seoulcialite

  • Thread Starter
  • Posts: 83
  • Location: Seoul, South Korea
    • MechSeoul
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #98 on: Tue, 09 June 2020, 01:07:06 »
Hey Seoulcialite, not sure if it's too late for this but, would it be possible to put an LED beside each one of the diodes and have the LED light up when electricity flowed through it?

Edit: Hmmm... perhaps it would make the sides too wide.

Yeaaaaa.... more than a couple of problems with that. That would require drastic changes to the PCB and housing. Design for the PCB already been completed and I already have the prototype PCBs with me. Prototype housing has been made and is now in the hands of Jae (of ProtoTypist) for fitment testing. I think it would definitely tip the balance aesthetic and functionality in a negative way.

Is there a discord for updates?

Not at the moment. I will post discord info once the prototype is approved and we get a better estimate on when the GB will run.

Offline Bachoo

  • Posts: 103
  • Location: Canada, Eh!
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #99 on: Tue, 09 June 2020, 11:07:53 »
I'm very into this.

Offline Kreath

  • Posts: 12
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #100 on: Fri, 12 June 2020, 22:38:00 »
I'm excited to follow the progress of this board!

Offline Seoulcialite

  • Thread Starter
  • Posts: 83
  • Location: Seoul, South Korea
    • MechSeoul
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #101 on: Sun, 14 June 2020, 12:59:37 »


Decided to post a little tease. Prototype is currently in Jae's possession. He will be doing fitment testing for the plate, pcb, and see-through panels before sending it to me for final approval.

Offline scatology

  • Posts: 77
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #102 on: Sun, 14 June 2020, 13:09:36 »
SEXY!!!

Offline stein3

  • Posts: 83
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #103 on: Sun, 14 June 2020, 13:24:43 »
Will Jae be building that or will you? Can't wait!

Offline hottrout

  • Posts: 932
  • Location: Norn Iron
  • I'd Hit Dat Key
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #104 on: Tue, 16 June 2020, 12:02:29 »
More interested.  Looking good.
Current Daily Driver : Maja Ergo - Kiwi

Systems
More
Work |i9-7940x@4.8ghz|32GB(3600)|RTX 2080Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
Home |i9-9900k@5GHz|16GB(3200)|STRIX-RTX2080Ti|EK Closed Water Loop|Z390-F|1TB 960 Pro|1TB 980 Pro|Dell AW3418DW|NEC MultiSync|Rode NT1&AI-1|Drobo16TB
Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

Plus 35 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software, games and manuals. 100's of systems including every Amiga model made

Keyboards
More
IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Vintage Cherrys (1982 onwards, just about all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL |  Filco Majistouch | KBDFans 5degree - Chocolate | Rama M6-B - Grey | CA66 Silver | ClueBoard Graphite/PC | Varmilo VA69M Silver | E7-V1 SE Yellow | Rama U-80 Space Grey | VN66 Navy | BOCC Frosted Polycarbonate | Rama M10-C Midnight | FLX Virgo Teal & Black | Rama M60-A LYN Kuro | Space65 CyberVoyager WhiteGold | Space65 CyberVoyager Terminal | Clarabelle Sandblasted Polycarbonate | Elongate Mini 1800 Blue | Petrichor 1800 Red | Vulcan Maja Ergo Green | Think6.5v2 RoboCop | Jacky Bear 65% E-White | Sakabato CB87 TKL Champagne | KCK KY-01 Aquamarine | Jae J-01 F&F E-White & Copper | S7.7 E-White | The Adélie Blue | NIX OxalyS80 LE Dark Polycarbonate | Mesa TKL E-White | F&F Smith & Rune IRON180 Graen/Brass | Skog Reboot Desert | CU7 Black | ROTR Silver & Copper | RAMA Kara Soya | Grid 650 E-White | SIX5 LE Aluminium & Gold |

Offline ♾Ḋḯṩⱥṩẗḝṟ

  • Posts: 10
  • Location: Germany
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #105 on: Wed, 17 June 2020, 05:36:15 »
Show Image


Decided to post a little tease. Prototype is currently in Jae's possession. He will be doing fitment testing for the plate, pcb, and see-through panels before sending it to me for final approval.

Chamfered edges are looking real clean, can't wait to see more. Please keep the teasers/updates coming ;)

Offline nathanchere

  • Posts: 549
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #106 on: Wed, 17 June 2020, 06:00:10 »
Quote
Tops: standard (possibly WKL and HHKB)

How likely is a HHKB top looking at this point?

Offline grundlemere

  • Posts: 201
  • Location: Washington, DC
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #107 on: Wed, 17 June 2020, 08:19:03 »
This is super extra. Love the Radio Shack vibes. I can't wait to see it lit up!

Offline pixelpusher

  • * Elevated Elder
  • Posts: 3649
  • Location: Tennessee - USA
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #108 on: Wed, 17 June 2020, 23:20:49 »
This is super extra. Love the Radio Shack vibes. I can't wait to see it lit up!

er... i don't think it lights up

Offline IvernTheTree

  • Posts: 6
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #109 on: Thu, 18 June 2020, 01:48:09 »
This is super extra. Love the Radio Shack vibes. I can't wait to see it lit up!

er... i don't think it lights up
Wait didn't the one who made it said that there will be led on the side to light the sides up?

Offline konstantin

  • Formerly constexpr
  • Posts: 1524
  • Location: Serbia
Re: [IC] Argyle - 60% Through-hole Keyboard
« Reply #110 on: Thu, 18 June 2020, 04:56:33 »
    This is super extra. Love the Radio Shack vibes. I can't wait to see it lit up!

    er... i don't think it lights up
    Wait didn't the one who made it said that there will be led on the side to light the sides up?

    Features:
    • ...
    • RGB LEDs for the side partitions
    [/list]

    Offline bow3i

    • Posts: 47
    • Location: Singapore
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #111 on: Fri, 19 June 2020, 03:28:19 »
    i like this a lot

    Offline pixelpusher

    • * Elevated Elder
    • Posts: 3649
    • Location: Tennessee - USA
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #112 on: Fri, 19 June 2020, 10:05:04 »
    Oh, neat.  It does have leds.  Looks like 4 rgb led spots on the pcb on both sides.   :thumb:

    Offline Llamakob

    • Posts: 13
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #113 on: Sun, 21 June 2020, 05:36:07 »
    Love this board do far, if its not too expensive ill probably be in for one, Also finally a board that is based from an EU Proxy.
    PC: 3900x, 2070super, ASUS Viii impact, 16 GB Trident z, NZXT h210

    Offline wolfez4444

    • Posts: 15
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #114 on: Wed, 22 July 2020, 14:27:49 »
    Any updates? Really looking forward to this!  :)

    Offline beekey

    • Posts: 419
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #115 on: Wed, 22 July 2020, 14:43:26 »
    Quote
    Tops: standard (possibly WKL and HHKB)

    How likely is a HHKB top looking at this point?
    Would also like to get a HHKB top.

    Offline pixelpusher

    • * Elevated Elder
    • Posts: 3649
    • Location: Tennessee - USA
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #116 on: Tue, 04 August 2020, 12:49:11 »
    My DCS red alert shipped and I saw the render that reminded me of this IC  :p

    Updoots?

    Offline Seoulcialite

    • Thread Starter
    • Posts: 83
    • Location: Seoul, South Korea
      • MechSeoul
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #117 on: Tue, 04 August 2020, 14:53:13 »
    My DCS red alert shipped and I saw the render that reminded me of this IC  :p

    Updoots?

    It seems like glass will not be viable. It's difficult to find a glazier that can cut to the specifications that we need, the tolerances would not be close enough, and also it'd be too costly. Jae has ordered acrylic panels which should arrive this week. So, we're hoping to finish fitment testing of all the parts soon.

    Offline pixelpusher

    • * Elevated Elder
    • Posts: 3649
    • Location: Tennessee - USA
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #118 on: Tue, 04 August 2020, 15:35:44 »
    My DCS red alert shipped and I saw the render that reminded me of this IC  :p

    Updoots?

    It seems like glass will not be viable. It's difficult to find a glazier that can cut to the specifications that we need, the tolerances would not be close enough, and also it'd be too costly. Jae has ordered acrylic panels which should arrive this week. So, we're hoping to finish fitment testing of all the parts soon.

    That all makes sense.  Thanks for the update. Such a lovely project. 

    What about offering an add on for an additional set of windows.  Could keep them stored away for down the road if you get a bad scratch.
    « Last Edit: Tue, 04 August 2020, 15:37:54 by pixelpusher »

    Online Rob27shred

    • Posts: 1129
    • Location: Pittsburgh, PA
    • Insane in the Membrane! 👻
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #119 on: Tue, 04 August 2020, 16:53:00 »
    My DCS red alert shipped and I saw the render that reminded me of this IC  :p

    Updoots?

    It seems like glass will not be viable. It's difficult to find a glazier that can cut to the specifications that we need, the tolerances would not be close enough, and also it'd be too costly. Jae has ordered acrylic panels which should arrive this week. So, we're hoping to finish fitment testing of all the parts soon.

    That all makes sense.  Thanks for the update. Such a lovely project. 

    What about offering an add on for an additional set of windows.  Could keep them stored away for down the road if you get a bad scratch.

    I second Pixel's ideal, scratching is the only real issue with using acrylic. If you offer extras nobody can complain down the road if theirs get scratched & they didn't buy an extra set, LOL!
    « Last Edit: Tue, 04 August 2020, 16:55:45 by Rob27shred »
    Official judge of the first annual Kei toss

    Offline pixelpusher

    • * Elevated Elder
    • Posts: 3649
    • Location: Tennessee - USA
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #120 on: Tue, 04 August 2020, 17:55:54 »
    Or make the files available in a public repository so people can cut their own 5 years from now. 

    Offline Owl-

    • Posts: 177
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #121 on: Tue, 04 August 2020, 19:53:54 »
    Why not go for museum/gallery grade variants? pretty sure they won't scratch as easily and are easier to cut for that matter. Could be less pricey.

    Offline macomac

    • Posts: 14
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #122 on: Wed, 05 August 2020, 14:07:23 »
    Really like everything about this board. Can't wait to see more progress!



    Offline Dubsadan

    • Posts: 8
    • Location: Canada
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #123 on: Wed, 05 August 2020, 16:26:52 »
    My DCS red alert shipped and I saw the render that reminded me of this IC  :p

    Updoots?

    It seems like glass will not be viable. It's difficult to find a glazier that can cut to the specifications that we need, the tolerances would not be close enough, and also it'd be too costly. Jae has ordered acrylic panels which should arrive this week. So, we're hoping to finish fitment testing of all the parts soon.

    Appreciate the update. Glass is nice but not worth any significant cost increase.

    Offline scatology

    • Posts: 77
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #124 on: Wed, 05 August 2020, 16:34:02 »
    The shape of the acrylic seams rectangular so glass planels are easily doable on your side if you really want to have glass.

    Offline Seoulcialite

    • Thread Starter
    • Posts: 83
    • Location: Seoul, South Korea
      • MechSeoul
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #125 on: Thu, 06 August 2020, 01:41:38 »
    The shape of the acrylic seams rectangular so glass planels are easily doable on your side if you really want to have glass.

    Glass panels were something we really wanted. It's not like we contacted one shop, was declined, and gave up on the idea. Jae has contacted a handful of glazier shop but the radius of the corners is too small. Also we would need 2mm thickness whereas most shops only do 4mm minimum. Finally, as I stated before, the tolerances would not be tight enough for the mounting system that we are using. No question that we could probably get something in that shape with glass but the chances that it wouldn't fit or would not be snug with the rubber mounting seams would be too high. However, we will be releasing the files for the panels after the group buy for anyone that wants to try to get them made themselves.
    « Last Edit: Thu, 06 August 2020, 01:43:13 by Seoulcialite »

    Offline scatology

    • Posts: 77
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #126 on: Thu, 06 August 2020, 10:54:44 »
    I was talking from your perspective.  I meant that the customer can easily make the panels on their side. It wasn’t clear, my bad.


    Offline Jae-3soteric

    • Formerly Jon_Flynn
    • Posts: 728
    • Location: United Kingdom
    • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
      • Jae | Top Clack
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #127 on: Thu, 06 August 2020, 11:35:13 »
    I was talking from your perspective.  I meant that the customer can easily make the panels on their side. It wasn’t clear, my bad.



    The shape of the acrylic seams rectangular so glass planels are easily doable on your side if you really want to have glass.

    Glass panels were something we really wanted. It's not like we contacted one shop, was declined, and gave up on the idea. Jae has contacted a handful of glazier shop but the radius of the corners is too small. Also we would need 2mm thickness whereas most shops only do 4mm minimum. Finally, as I stated before, the tolerances would not be tight enough for the mounting system that we are using. No question that we could probably get something in that shape with glass but the chances that it wouldn't fit or would not be snug with the rubber mounting seams would be too high. However, we will be releasing the files for the panels after the group buy for anyone that wants to try to get them made themselves.


    Yeah, its a difficult one. We can physically get glass cut to size, but its not cheap, and its not toughened as we need it in 2mm thickness. From a safety perspective I wouldn't be comfortable with 2mm thick glass in there after some conversations with Glaziers - plus there would be some re-design of the board needed as we would need to change the internals and thicken up the height to accommodate thicker glass and still have room for components. Given the cost associated to achieve that, plus the cost variance in glass and acrylic vs having a great material available in perspex off the shelf it def makes sense to go with that for now.

    That being said we can always open up the files for people to get some additional materials made up for the window areas.


    Offline paperassgasket

    • Posts: 198
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #128 on: Thu, 06 August 2020, 15:52:36 »
    Just submitted my IC.
    Good luck with this one. :thumb:

    Offline nathanchere

    • Posts: 549
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #129 on: Fri, 07 August 2020, 06:06:32 »
    Quote
    Tops: standard (possibly WKL and HHKB)

    How likely is a HHKB top looking at this point?

    Just in case this was accidentally missed... *bump*

    Offline zekth

    • Posts: 268
    • Location: LA FRONCE
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #130 on: Fri, 07 August 2020, 17:01:16 »
    Red and white hhkb such a cool combo

    Offline NoxNoxNox

    • Posts: 73
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #131 on: Fri, 07 August 2020, 20:48:47 »
    Acrylic should be just fine for this application. 

    Looking forward to this one big time.

    Offline jagger27

    • Posts: 73
    • Location: Canada
    • ne colevrak???
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #132 on: Sat, 08 August 2020, 20:35:12 »
    I need this so much

    Offline darthcapn

    • Posts: 83
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #133 on: Sat, 08 August 2020, 20:43:11 »
    Expected timelframe for gb?

    Offline EMC Labs

    • Posts: 447
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #134 on: Sat, 08 August 2020, 21:27:26 »
    How likely will the HHKB and WKL tops be included?

    Offline Seoulcialite

    • Thread Starter
    • Posts: 83
    • Location: Seoul, South Korea
      • MechSeoul
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #135 on: Mon, 10 August 2020, 01:51:33 »
    How likely will the HHKB and WKL tops be included?

    Expected timelframe for gb?

    I hope to have more details soon. Testing the prototype is almost complete.
    « Last Edit: Mon, 10 August 2020, 04:35:04 by Seoulcialite »

    Offline keebpleeb

    • Posts: 20
    • Location: Undisclosed Clack House
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #136 on: Mon, 10 August 2020, 09:26:45 »
    Just stumbled upon this - I love me some through-hole builds and this one is super fun! GLWIC - I'll be watching this one closely!

    Offline Zenith10010

    • Posts: 7
    • Location: NS,Canada
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #137 on: Tue, 18 August 2020, 20:13:13 »
    Looks like I found my next board. Looks absolutely incredible, well done!
    Hopefully this comes to Deskhero.ca
    « Last Edit: Tue, 18 August 2020, 20:18:10 by Zenith10010 »

    Offline dirtegg

    • Posts: 10
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #138 on: Sat, 22 August 2020, 16:06:08 »
    This is the keyboard that finally made me create an account here... eagerly awaiting future announcements regarding its development!

    Offline Mtvan87

    • Posts: 5
    • Location: USA
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #139 on: Thu, 03 September 2020, 21:01:27 »
    Looks very nice, loving the left & right components.

    Offline jimboytacos

    • Posts: 213
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #140 on: Fri, 04 September 2020, 15:18:57 »
    Curious to ask ...
    If I were to reverse engineer a pcb to fit this case, would the spacing, which houses the dual-side clear panels, fit 1.5U keycaps properly? Say, keycaps from an ergo kit....

    Do you have a render of what it might look like? Just cuz I'm being extremely adventurous.

    Offline atlanticise

    • Posts: 63
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #141 on: Tue, 15 September 2020, 08:45:23 »
    this is truly super cool! i'm very interested, will this be a limited GB?

    Offline archerypro459

    • Posts: 21
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #142 on: Tue, 15 September 2020, 10:21:50 »
    haven't always been a fan of through hole, but my god is this pretty.


    Offline EXOgreen

    • Posts: 6
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #143 on: Wed, 16 September 2020, 13:11:22 »
    I am interested as well. Im a fan of products that show off the machine behind the function.

    Offline alspdx

    • Posts: 5
    • Location: Portland, OR
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #144 on: Wed, 16 September 2020, 23:09:26 »
    So good, HHKB please!

    Offline jagger27

    • Posts: 73
    • Location: Canada
    • ne colevrak???
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #145 on: Fri, 16 October 2020, 01:01:56 »
    ne gb date?

    Offline Ulei

    • Posts: 3
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #146 on: Tue, 20 October 2020, 01:43:05 »
    Really interested if my wallet says yes.



    Offline Seoulcialite

    • Thread Starter
    • Posts: 83
    • Location: Seoul, South Korea
      • MechSeoul
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #147 on: Mon, 26 October 2020, 14:22:28 »
    The implementation of window mount and the diffuser was not exactly satisfactory. We will be making some minor changes and ordering another prototype. We are aiming to have the GB in Q1 of next year. Also, it is quite likely that we will be able to offer more units than the previously mentioned estimate of around 200. I will provide more updates as I get them.

    Offline SnowShy

    • Posts: 6
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #148 on: Mon, 26 October 2020, 16:57:26 »
    YES PLEASE

    Offline nathanchere

    • Posts: 549
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #149 on: Mon, 26 October 2020, 18:23:54 »
    The implementation of window mount and the diffuser was not exactly satisfactory. We will be making some minor changes and ordering another prototype. We are aiming to have the GB in Q1 of next year. Also, it is quite likely that we will be able to offer more units than the previously mentioned estimate of around 200. I will provide more updates as I get them.

    Did the prototype give any answers re: likelihood of running this with HHKB blocker option?

    Offline Ashen_21

    • Posts: 20
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #150 on: Wed, 04 November 2020, 17:38:30 »
    Super interesting and gorgeous board! Keen to see it develop!

    Offline Seoulcialite

    • Thread Starter
    • Posts: 83
    • Location: Seoul, South Korea
      • MechSeoul
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #151 on: Fri, 13 November 2020, 14:46:51 »

    Offline davisthegreat

    • Posts: 71
      • 3DKeebs
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #152 on: Fri, 13 November 2020, 15:54:28 »
    Proto? Looks soo good

    Offline kwerty

    • Posts: 56
    • beep boop i'm a robot
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #153 on: Fri, 13 November 2020, 15:56:49 »
    This looks insane

    Offline hkhawk

    • Posts: 143
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #154 on: Fri, 13 November 2020, 16:13:52 »
    Looks amazing

    Offline TheHMan

    • Posts: 4
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #155 on: Fri, 13 November 2020, 21:31:57 »
    ETA?

    Offline hottrout

    • Posts: 932
    • Location: Norn Iron
    • I'd Hit Dat Key
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #156 on: Mon, 16 November 2020, 04:29:23 »
    WOW, that picture is worth a thousand words.  It would make an awesome gaming board.  Very interested now.
    Current Daily Driver : Maja Ergo - Kiwi

    Systems
    More
    Work |i9-7940x@4.8ghz|32GB(3600)|RTX 2080Ti|Bespoke Water, 360m Rad|X299 Prime Deluxe|EK x299 Monoblock|Optane 900p|2x1TB 960 Pro|2x10TB Helium|Dell U3415W + Dell UP2116Q
    Home |i9-9900k@5GHz|16GB(3200)|STRIX-RTX2080Ti|EK Closed Water Loop|Z390-F|1TB 960 Pro|1TB 980 Pro|Dell AW3418DW|NEC MultiSync|Rode NT1&AI-1|Drobo16TB
    Mining |i5-7500|16GB(2400)|H110 Pro BTC+|8x1080Ti|2x1650Watt PSU

    Plus 35 years of collecting retro computers, consoles, games, peripherals, mainframes and mini's as well as their software, games and manuals. 100's of systems including every Amiga model made

    Keyboards
    More
    IBM 3101 | IBM 3276 | IBM 5150 | IBM ModelM | Dictaphone Dual Display | Vintage Cherrys (1982 onwards, just about all of them) | Commodore (all of them) | Nixdorf | Siemens | ICL |  Filco Majistouch | KBDFans 5degree - Chocolate | Rama M6-B - Grey | CA66 Silver | ClueBoard Graphite/PC | Varmilo VA69M Silver | E7-V1 SE Yellow | Rama U-80 Space Grey | VN66 Navy | BOCC Frosted Polycarbonate | Rama M10-C Midnight | FLX Virgo Teal & Black | Rama M60-A LYN Kuro | Space65 CyberVoyager WhiteGold | Space65 CyberVoyager Terminal | Clarabelle Sandblasted Polycarbonate | Elongate Mini 1800 Blue | Petrichor 1800 Red | Vulcan Maja Ergo Green | Think6.5v2 RoboCop | Jacky Bear 65% E-White | Sakabato CB87 TKL Champagne | KCK KY-01 Aquamarine | Jae J-01 F&F E-White & Copper | S7.7 E-White | The Adélie Blue | NIX OxalyS80 LE Dark Polycarbonate | Mesa TKL E-White | F&F Smith & Rune IRON180 Graen/Brass | Skog Reboot Desert | CU7 Black | ROTR Silver & Copper | RAMA Kara Soya | Grid 650 E-White | SIX5 LE Aluminium & Gold |

    Offline Darthbaggins

    • Posts: 305
    • Location: Acworth, GA
    • PC Cannibal
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #157 on: Wed, 18 November 2020, 13:18:44 »
    Want this board/kit!!  :eek:

    Online Dadrophenia

    • Posts: 30
    • Location: Washington, US
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #158 on: Thu, 19 November 2020, 12:56:23 »
    Photo looks great! Super excited for this board, hoping we get a black or white PCB option.

    Offline Lil Pai

    • Posts: 3
    • Location: Norway
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #159 on: Sat, 21 November 2020, 08:24:33 »
    Looks very classy, would love to get my hands on this board  :thumb:

    Offline Jaxxstatic

    • Posts: 423
    • Haptic Recon
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #160 on: Sat, 21 November 2020, 18:43:13 »
    I can't express enough how much I want this keyboard. My favorite look of 2020.


    Offline stormer_kbds

    • Posts: 8
    • Location: Denver, CO
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #162 on: Sat, 28 November 2020, 12:34:26 »
    This thing needs to get on a GB soon man!  I'm in!  So awesome!  Take my money and run!

    Offline Milky_Mooncake

    • Posts: 5
    • Location: Germany
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #163 on: Tue, 01 December 2020, 03:05:10 »
    damn, thats hot
    i'm in!

    Offline guy0naBuffal0

    • Posts: 15
    • Location: Colorado, USA
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #164 on: Sun, 06 December 2020, 09:15:46 »
    Also in! GB when? Is there a discord? I don't want to miss this.

    Offline Afresh

    • Posts: 41
    • Location: right here
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #165 on: Mon, 14 December 2020, 08:44:34 »
    Will logoless version be possible like renders showed?

    Offline PHYLO

    • Posts: 25
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #166 on: Wed, 16 December 2020, 10:04:25 »
    Really sweet design here! Love seeing internals of keyboards.

    Offline nick779

    • Posts: 32
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #167 on: Wed, 16 December 2020, 11:33:24 »
    Maybe I missed it, but was (plate) mounting type listed anywhere?

    Offline Jaxxstatic

    • Posts: 423
    • Haptic Recon
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #168 on: Wed, 16 December 2020, 20:37:38 »
    Maybe I missed it, but was (plate) mounting type listed anywhere?

    I don't see it anywhere either,
    but there are no mounting tabs on the PCB, so not PCB mount;
    no holes in the PCB for plate mount; and
    no foam under the PCB that can be seen in renders, so I'm assuming either gasket/sandwich or topmount. 

    This board is all about looks for me though. No matter what kind of mounting, or even if it sounds horrific, I'll figure out a way to make it sound and feel good.

    Offline pandaman97

    • Posts: 24
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #169 on: Wed, 16 December 2020, 22:10:27 »

    Features:
    • 8 degree typing angle
    • Aluminum housing
    • Visible through-hole components
    • RGB LEDs for the side partitions
    • Top mounted plate
    • QMK/VIA
    • USB-C
    Renders:


    Maybe I missed it, but was (plate) mounting type listed anywhere?

    I don't see it anywhere either,
    but there are no mounting tabs on the PCB, so not PCB mount;
    no holes in the PCB for plate mount; and
    no foam under the PCB that can be seen in renders, so I'm assuming either gasket/sandwich or topmount. 

    This board is all about looks for me though. No matter what kind of mounting, or even if it sounds horrific, I'll figure out a way to make it sound and feel good.

    Here it is, guys  ;)

    Offline bvckcompton

    • Posts: 6
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #170 on: Thu, 17 December 2020, 15:19:25 »
    Need this! Looks amazing

    Offline hwood34

    • underwater squad
    • * Exalted Elder
    • Posts: 5903
    • Location: USA
    • #spacefliplife
      • Keyboard Illuminati
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #171 on: Thu, 17 December 2020, 15:23:33 »
    man do I love this concept and hate this branding
    IV KWK Info Thread & KBK Info Thread IV (out of date)

    Old GBs: Gateron Switches (2015) | Gen.s Gem Caps (2015) | CF-LX R1 (2015) | CF-LX R2 (2017) | CF-LXXX (2017)

    "Under no pretext should arms and ammunition be surrendered; any attempt to disarm the workers must be frustrated, by force if necessary"

    Offline Jaxxstatic

    • Posts: 423
    • Haptic Recon
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #172 on: Thu, 17 December 2020, 17:18:52 »
    I think Namsan Tower's a good choice. It's iconic to Seoul, and I've got a lot of good memories there. Easy reference to meet up with people and to use for directions.

    Offline beekey

    • Posts: 419
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #173 on: Fri, 18 December 2020, 00:58:42 »
    Any news if a HHKB top will be available?

    Offline yoniwolf1202

    • Posts: 45
    • Location: Maryland, USA
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #174 on: Fri, 18 December 2020, 08:50:19 »
    Can't wait for this! Great work Seoul!

    Offline Agent Ice

    • Posts: 1
    • Location: United States
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #175 on: Fri, 18 December 2020, 22:10:42 »
    I'm so hype for this kit/board! I heard that the GB was planned for Q1 2021. Is this still true? And what is the approximate pricing?
    « Last Edit: Sat, 19 December 2020, 20:55:23 by Agent Ice »

    Offline Darthbaggins

    • Posts: 305
    • Location: Acworth, GA
    • PC Cannibal
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #176 on: Wed, 30 December 2020, 14:09:34 »
    Is it wrong that I want this in a 1800 layout as well.
    I really can't wait for this to go up for GB.

    Offline Seoulcialite

    • Thread Starter
    • Posts: 83
    • Location: Seoul, South Korea
      • MechSeoul
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #177 on: Fri, 08 January 2021, 08:51:23 »
    Jae will be building the prototype on Top Clack on January 17th 12pm PT / 3pm ET / 8pm UK!

    Offline Visionaire

    • Posts: 507
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #178 on: Fri, 08 January 2021, 09:04:43 »
    Jae will be building the prototype on Top Clack on January 17th 12pm PT / 3pm ET / 8pm UK!

    Very nice!
    Fan of Duck keyboards? Join our Discord server! https://discord.gg/f278P6w

    Offline Seoulcialite

    • Thread Starter
    • Posts: 83
    • Location: Seoul, South Korea
      • MechSeoul
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #179 on: Fri, 08 January 2021, 09:16:03 »
    Jae will be building the prototype on Top Clack on January 17th 12pm PT / 3pm ET / 8pm UK!

    Very nice!


    Offline pixelpusher

    • * Elevated Elder
    • Posts: 3649
    • Location: Tennessee - USA
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #180 on: Fri, 08 January 2021, 10:51:56 »
    Jae will be building the prototype on Top Clack on January 17th 12pm PT / 3pm ET / 8pm UK!

    Do you expect to start the group buy some time soon after the stream?  :)

    Offline dibstern

    • Posts: 121
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #181 on: Sat, 09 January 2021, 15:25:53 »
    Can you please include split space support? Would be a dealbreaker for me, which would be much sad since premium through-hole keebs come around so rarely

    Offline nathanchere

    • Posts: 549
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #182 on: Sun, 10 January 2021, 08:11:53 »
    How likely will the HHKB and WKL tops be included?

    Expected timelframe for gb?

    I hope to have more details soon. Testing the prototype is almost complete.

    ?

    Offline nathanchere

    • Posts: 549
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #183 on: Sun, 10 January 2021, 08:12:04 »
    The implementation of window mount and the diffuser was not exactly satisfactory. We will be making some minor changes and ordering another prototype. We are aiming to have the GB in Q1 of next year. Also, it is quite likely that we will be able to offer more units than the previously mentioned estimate of around 200. I will provide more updates as I get them.

    Did the prototype give any answers re: likelihood of running this with HHKB blocker option?

    ?

    Offline nathanchere

    • Posts: 549
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #184 on: Sun, 10 January 2021, 08:13:44 »
    Suffice to say with the utterly garbage communication on basic points here, I won't be risking any money on a group buy with them.
    Plenty of other keebs in the sea.

    Offline Seoulcialite

    • Thread Starter
    • Posts: 83
    • Location: Seoul, South Korea
      • MechSeoul
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #185 on: Sun, 10 January 2021, 08:46:45 »
    Suffice to say with the utterly garbage communication on basic points here, I won't be risking any money on a group buy with them.
    Plenty of other keebs in the sea.

    Sorry you feel that way. I didn't want to give an empty update but I'll try to keep in mind some people like have an update even if it's just to say "no progress." I hope you find a keeb that you like!

    Will logoless version be possible like renders showed?

    I will be keeping in the silkscreen at this point in time.

    Jae will be building the prototype on Top Clack on January 17th 12pm PT / 3pm ET / 8pm UK!

    Do you expect to start the group buy some time soon after the stream?  :)

    New estimate for the GB will be Q1 of this year.

    Any news if a HHKB top will be available?

    We have still not finalized options yet. I plan to have a talk with Jae shortly after the build stream to hammer out some details.
    « Last Edit: Sun, 10 January 2021, 08:54:39 by Seoulcialite »

    Offline Seoulcialite

    • Thread Starter
    • Posts: 83
    • Location: Seoul, South Korea
      • MechSeoul
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #186 on: Sun, 10 January 2021, 08:54:06 »
    I want to apologize for the lack of updates but that's partly because there wasn't much news. The testing of the prototype has taken longer than expected. The PCB and plate fits fine. But we are still tweaking the implementation of the windows and the diffuser. Also, there is some light bleed from the component side which we wish to address. Finally, Jae has been quite busy on the vendor side due to Brexit woes.

    We are aiming to run the GB in Q1 but I don't want to make any promises. I'm just going to take Blizzard's stance on development and say, "It's done when it's done."

    Offline paperassgasket

    • Posts: 198
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #187 on: Sun, 10 January 2021, 13:26:49 »
    I want to apologize for the lack of updates but that's partly because there wasn't much news. The testing of the prototype has taken longer than expected. The PCB and plate fits fine. But we are still tweaking the implementation of the windows and the diffuser. Also, there is some light bleed from the component side which we wish to address. Finally, Jae has been quite busy on the vendor side due to Brexit woes.

    We are aiming to run the GB in Q1 but I don't want to make any promises. I'm just going to take Blizzard's stance on development and say, "It's done when it's done."

    I was just wondering how things were going, so thanks for the update.
    Personally, I would much prefer that you lean towards the side of taking your time and making this board just right than rushing to get it out. Plus Q1 is already STACKED with a lot of other things so there's going to be quite a bit of competition for my wallet.

    Offline Afresh

    • Posts: 41
    • Location: right here
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #188 on: Sun, 10 January 2021, 16:03:31 »
    We are aiming to run the GB in Q1 but I don't want to make any promises. I'm just going to take Blizzard's stance on development and say, "It's done when it's done."

    Oh.. The old Blizzard

    Offline koolaidpapa

    • Posts: 26
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #189 on: Sun, 10 January 2021, 20:20:56 »
    This is really cool, can't wait for the run

    Offline hiddensong

    • Posts: 50
    • Location: here.....now
    • this too shall pass
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #190 on: Thu, 14 January 2021, 05:08:40 »
    I never really liked the look of thru-hole keebs. Until the Argyle. I don't know what it is as this looks extremely similar to every other thru-hole. It just hits me right in my "open wallet" button.

    Offline SpenceFence

    • Posts: 1
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #191 on: Fri, 22 January 2021, 00:35:33 »
    I made a geekhack account specifically to comment how much I love this board, Im definitely going to cop one when it comes out!

    Offline dirtegg

    • Posts: 10
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #192 on: Sat, 23 January 2021, 10:24:02 »
    I never really liked the look of thru-hole keebs. Until the Argyle. I don't know what it is as this looks extremely similar to every other thru-hole. It just hits me right in my "open wallet" button.

    I think for me, it's so special because the "exhibition of components" aspect of through-hole boards is truly emphasized here. It's taken to another artistic level for me, in the sense that it feels like you're not just happening to see the components, but they are designed to be displayed front and center (or rather, left and right!).

    Offline herfalerf

    • Posts: 29
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #193 on: Sat, 23 January 2021, 11:58:34 »
    Watched this get built on top clack.  If this goes to group buy it will be my first 60%

    Offline NoteMakoti

    • Posts: 46
    • for sale, baby shoes, never worn
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #194 on: Sat, 23 January 2021, 12:01:07 »
    Didn’t even know there were RGBs on the through-holes. Incredible.

    Offline Ranger_Trivette

    • Posts: 2
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #195 on: Mon, 25 January 2021, 07:25:08 »
    what a nice project!
    i'm definitely interested!

    Offline Full

    • Posts: 126
    • Location: Norway
    Re: [IC] Argyle - 60% Through-hole Keyboard
    « Reply #196 on: Mon, 25 January 2021, 08:11:21 »
    Awesome job on this project, will for sure try to grab one! :thumb: