Author Topic: [GB] iNETT Studio:SQUARE.X 60% Keyboard  (Read 18558 times)

0 Members and 1 Guest are viewing this topic.

Offline Simen

  • Thread Starter
  • Posts: 243
[GB] iNETT Studio:SQUARE.X 60% Keyboard
« on: Sun, 21 June 2020, 01:26:07 »
    7/5/2020 Update
    I have updated the order check spreadsheet with PayPal invoice numbers. Please double check the detail of your order on both the spreadsheet and the PayPal invoice and make sure they match. I will begin to purchase the material soon so we can start the manufacturing process  :thumb:
    https://docs.google.com/spreadsheets/d/1N2XKpBBak214zigShFWnvcRwLYnmMpnGY5m9jc_GRuw/edit?usp=sharing

    GB Information
    Thank you all for participating in this group buy. The order phase has completed and the rest of the invoices will go out soon. Please pay your invoice before the deadline to avoid cancelation of your order. Invoices sent before 6/28 has a deadline of 6/30. Invoices sent 6/28 has a deadline of 7/1. Please double check the specifications for your order on the invoice before paying, and let me know if there is any issues. Thank you all!

    Link to Interest Check
    https://geekhack.org/index.php?topic=105145.0

    Link to Group Buy Form
    https://docs.google.com/forms/d/e/1FAIpQLSciwAAUFmPPFthPyWRRS7PZjvjI1ERk_dEIstd22VSbAd48KA/viewform?usp=sf_link

    Link to Order Check (I tried to update this a few times a day, please be patient if you don't see your order yet)
    https://docs.google.com/spreadsheets/d/1N2XKpBBak214zigShFWnvcRwLYnmMpnGY5m9jc_GRuw/edit?usp=sharing

    Link to Order Cancel Form
    https://forms.gle/TWFGtRHTHqmRr27b8

    GB Quick Details
    Timing: 6/22 20:00 PST to 6/28 20:00 PST
    Pricing: $350+ (detailed below)
    Estimated ship date: November 2020
    Shipping: Either through DHL or SF Express; will invoice for shipping separately when ready to ship

    TaeKeyboardís Review

    Nathanís Stream

    Features
    Form Factor: 60%
    Mounting Mechanism: Sandwich
    Layout: WKL, WK, HHKB
    Typing Angle: 7 Degree
    PCB: Type-C, QMK, VIA (designed and supported by astro)
    Lighting: Per Key RGB, Underglow
    Case Material: Aluminum / PC
    Case Color: Anodized Black / Blue / Red / Green; E-White
    Plate Material: Aluminum / Brass
    Plate Thickness: 1.5mm
    Plate Color: Anodized Black / Blue / Red / Green; E-White; E-Yellow; Sand Blasted Brass
    Plate Coverage: Full / Half (Hot-Swap is not supported on half-plate)
    Weight Material: Aluminum / Brass / PC
    Weight Color: Anodized Black / Blue / Red / Green; E-White; E-Yellow; Sand Blasted Brass[/li][/list]

    Supported Layouts
    1.   Solder PCB

    2.   Hot-Swap PCB


    Pricing
    1.   SQUARE.X base kit with solderable PCB $350, not including PayPal fees and shipping
    2.   SQUARE.X base kit with hot-swap PCB $360, not including PayPal fees and shipping

    Items Included in Base Kit
    1.   Case Ė Aluminum or PC
    2.   Plate Ė Aluminum or Brass (+$60) There was an error on the form earlier saying it's +$50, it is now fixed.
    3.   Weight Ė Aluminum or Brass (+$30)
    4.   PCB Ė Solderable or Hot-Swap (+$10)
    5.   Screws & rubber feet

    Add-ons
    1.   Polished Chamfer Ė $100 (only available on Black aluminum case)
    2.   Additional Plate Ė $70 Aluminum, $120 Brass (only 1 plate can be added per base kit)
    3.   Additional Weight Ė $30 Aluminum & PC, $50 Brass
    4.   Additional PCB - $35 Solderable, $45 Hot-Swap

    Terms and Promises
    We will try our best to deliver the highest quality product to you, but we cannot guarantee every keyboard to be 100% perfect. If the keyboard arrives with imperfections, based on the level of severity, resolutions may include replacement, partial refund, or return.

    Updates Frequency
    We promise to provide progress update at least once a month, most likely more through our Instagram.

    Q&A
    Q1. Where is the weight?
    A1. The weight is the black part of the keyboard pictured below. It also acts as a background of the logos. You can choose either aluminum (anodized Black / Blue / Red / Green; E-White; E-Yellow) or brass (sand blasted).

     
    Q2. How about the N and the SQUARE.X logo that are mounted to the weight?
    A2. They are not part of the weight and will be in the same color as the case.

    Pictures









    Photos of Brass Plate from SQUARE 80

    « Last Edit: Sun, 05 July 2020, 03:41:07 by Simen »

    Offline alxbrn

    • Posts: 8
    • Location: Denmark
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #1 on: Tue, 23 June 2020, 06:59:47 »
    noice

    Offline CrazyAssMonkey

    • Posts: 282
    • Location: The Sovereign States of The Jungle
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #2 on: Tue, 23 June 2020, 07:48:16 »
    I was wondering if we could have a video of the final prototype just to see how the product we receive would look and sound.
    Thanks


    Sent from my iPhone using Tapatalk
    -------------------------------------------------------------
    The Constitution of the Sovereign States of The Jungle is currently being written...
    -------------------------------------------------------------

    Offline BMLN

    • Posts: 10
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #3 on: Tue, 23 June 2020, 09:29:09 »
    the first 60% board that is really tempting me.

    Online titanium

    • Posts: 63
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #4 on: Tue, 23 June 2020, 09:34:13 »
    Any comparisons of the polished chamfer upgrade?

    Offline kidpid

    • Posts: 84
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #5 on: Tue, 23 June 2020, 09:47:08 »
    I was wondering if we could have a video of the final prototype just to see how the product we receive would look and sound.
    Thanks


    Sent from my iPhone using Tapatalk

    I second this. The TaeKeyboards and Taeha Types videos don't accurately represent the product we'll receive due to the changes made from the prototype.

    Offline Ozakiis12

    • Posts: 6
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #6 on: Tue, 23 June 2020, 10:02:17 »
    So, is HHKB layout possible for hotswap or only the normal 60%?

    Offline finalarcadia

    • Posts: 233
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #7 on: Tue, 23 June 2020, 10:37:02 »
    Can we get images of all plate layouts available.

    Sent from my Pixel 3 using Tapatalk


    Offline kidpid

    • Posts: 84
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #8 on: Tue, 23 June 2020, 10:37:50 »
    So, is HHKB layout possible for hotswap or only the normal 60%?

    HHKB and WKL are both possible with the hotswap PCB. Just don't put switches where the blockers are.

    Offline gnhuy91

    • Posts: 104
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #9 on: Tue, 23 June 2020, 10:56:04 »
    no orange case? ouch, I'm in anyway though but hoped for a full orange board

    Offline joe405

    • Posts: 37
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #10 on: Tue, 23 June 2020, 11:08:25 »
    Any way to add an extra case? Having trouble deciding colour combo  ;D

    Offline Yehuo.

    • Posts: 7
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #11 on: Tue, 23 June 2020, 11:36:06 »
    Just fill out the Form and wait for invoice,can't wait for this board!

    Offline Ozakiis12

    • Posts: 6
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #12 on: Tue, 23 June 2020, 12:06:13 »
    So, is HHKB layout possible for hotswap or only the normal 60%?

    HHKB and WKL are both possible with the hotswap PCB. Just don't put switches where the blockers are.

    Ofcourse lol, thanks for making that clear! Ordered the exact same as Taekeyboard.

    Offline r4bbl3d4bbl3

    • Posts: 116
    • Location: USA
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #13 on: Tue, 23 June 2020, 14:45:17 »
    Is this unlimited GB or will there be a cutoff? Wondering if I have time to decide on this or not.  ;D

    Offline Jyobah

    • Posts: 10
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #14 on: Tue, 23 June 2020, 15:18:31 »
    Is this unlimited GB or will there be a cutoff? Wondering if I have time to decide on this or not.  ;D

    Unlimited qty but limited time stated above in the description.

    Offline AvoidingYou

    • Posts: 12
    • Location: GMT-4
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #15 on: Tue, 23 June 2020, 16:27:21 »
    If this were a 65%  I would be in right now, so fast.

    Offline BMLN

    • Posts: 10
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #16 on: Tue, 23 June 2020, 17:05:57 »
    If this were a 65%  I would be in right now, so fast.

    Same for me, but probably still getting this one

    Offline MechaPaul

    • Posts: 4
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #17 on: Tue, 23 June 2020, 18:08:57 »
    The blue is super nice! Very tempted.

    Offline ninjacore

    • Posts: 273
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #18 on: Tue, 23 June 2020, 20:11:03 »
    Definitely in, have a few questions, though.

    1. Any idea how much heavier the brass weight is than the aluminum?
    2. Weight of the brass plate vs. aluminum?
    3. Which hotswap sockets are going to be installed in the hotswap PCBs? mill max 7305?
    4. Will there be any coating on the brass parts?
    5. Front height?
    « Last Edit: Tue, 23 June 2020, 22:22:17 by ninjacore »

    Offline Coolbeanz

    • Posts: 20
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #19 on: Tue, 23 June 2020, 21:31:51 »
    Is there any render or pic of the half plate? Also, would be interested in e-yellow as an option for case colour

    Offline ninjacore

    • Posts: 273
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #20 on: Tue, 23 June 2020, 21:36:29 »
    Is there any render or pic of the half plate? Also, would be interested in e-yellow as an option for case colour

    There's this one from the IC thread:  https://i.imgur.com/yV9JXIL.jpg

    Offline snoofy

    • Posts: 6
    • Location: kor
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #21 on: Tue, 23 June 2020, 22:02:04 »
    i hope change my order

    how can i do?

    Offline KurageOuji

    • Posts: 6
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #22 on: Tue, 23 June 2020, 22:28:02 »
    Anyone know when invoices will go out?

    Offline abellp327

    • Posts: 8
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #23 on: Tue, 23 June 2020, 22:44:11 »
    couldn't decide with PC or E-white. the additional cost for the brass was oof, white it is.


    P.S Please do DHL.. SF EXPRESS gets ton of bad reviews
    « Last Edit: Tue, 23 June 2020, 23:04:43 by abellp327 »

    Offline ninjacore

    • Posts: 273
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #24 on: Tue, 23 June 2020, 23:49:00 »
    Anyone know when invoices will go out?
    I would assume the 28th or 29th, after the GB period has ended?

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #25 on: Wed, 24 June 2020, 00:43:43 »
    I was wondering if we could have a video of the final prototype just to see how the product we receive would look and sound.
    Thanks


    Sent from my iPhone using Tapatalk

    https://imgur.com/a/pjkB9Ia

    I don't have the final prototype with me right now, but here is a short video of the 2nd prototype. It might be difficult to see, but I can assure you the plate no longer wobbles after the revision. The keyboard basically looks identical to what Nathan and Tae showed in their videos, and the sound would be very close if not the same.

    Offline rorota

    • Posts: 1
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #26 on: Wed, 24 June 2020, 00:46:20 »
    I want black case and red plate,weight.
    Can I decide with this option?

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #27 on: Wed, 24 June 2020, 00:47:44 »
    Any comparisons of the polished chamfer upgrade?

    The black unit in the IC page has the polished chamfer. It might be difficult to see in the picture, but if you have seen the edges on the iPhone 5, that's what it looks like.

    https://geekhack.org/index.php?topic=105145.0

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #28 on: Wed, 24 June 2020, 00:49:18 »
    So, is HHKB layout possible for hotswap or only the normal 60%?

    Yes, HHKB is possible with hot swap. It would use the same layout at the picture below, but with the two Ctrl keys blocked.
    https://i.imgur.com/rqcHly4.jpg

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #29 on: Wed, 24 June 2020, 00:52:33 »
    Can we get images of all plate layouts available.

    Sent from my Pixel 3 using Tapatalk

    WK would have no blockers. (the white unit)
    WKL would have blockers on the 2 Win keys. (the black unit)
    HHKB would have blockers on the 2 Ctrl Keys. (the green and pc/yellow unit)

    https://i.imgur.com/rqcHly4.jpg

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #30 on: Wed, 24 June 2020, 00:55:46 »
    Any way to add an extra case? Having trouble deciding colour combo  ;D

    You can always add another keyboard XD

    Offline kabocha

    • Posts: 23
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #31 on: Wed, 24 June 2020, 00:56:12 »
    Just wondering, why isn't the half plate compatible with the hotswap pcb? Does the half plate come in all three layouts? Thanks!

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #32 on: Wed, 24 June 2020, 00:56:29 »
    Is this unlimited GB or will there be a cutoff? Wondering if I have time to decide on this or not.  ;D

    Unlimited, but ends this Sunday.

    Offline surreal19

    • Posts: 3
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #33 on: Wed, 24 June 2020, 00:57:13 »
    is there any way to edit the google form after submitting? or do I just make a new one?

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #34 on: Wed, 24 June 2020, 01:17:06 »
    Definitely in, have a few questions, though.

    1. Any idea how much heavier the brass weight is than the aluminum? brass weight is roughly 600g
    2. Weight of the brass plate vs. aluminum? I am unsure about this one, but would be significantly heavier than regular alu vs brass plate due to structure
    3. Which hotswap sockets are going to be installed in the hotswap PCBs? mill max 7305? kailh
    4. Will there be any coating on the brass parts? clear coated
    5. Front height? 19mm

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #35 on: Wed, 24 June 2020, 01:17:48 »
    Anyone know when invoices will go out?

    Will most likely be a day or two after GB ends.

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #36 on: Wed, 24 June 2020, 01:19:34 »
    I want black case and red plate,weight.
    Can I decide with this option?

    Yes, you can choose ano-black for case, ano-red for both plate and internal weight

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #37 on: Wed, 24 June 2020, 01:21:26 »
    Just wondering, why isn't the half plate compatible with the hotswap pcb? Does the half plate come in all three layouts? Thanks!

    Because the switches are not stable on a hot swap PCB without a plate. Yes, half plate comes in all layouts.

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #38 on: Wed, 24 June 2020, 01:23:50 »
    Definitely in, have a few questions, though.

    1. Any idea how much heavier the brass weight is than the aluminum? roughly 600g
    2. Weight of the brass plate vs. aluminum? roughly 750g
    3. Which hotswap sockets are going to be installed in the hotswap PCBs? mill max 7305? kailh
    4. Will there be any coating on the brass parts? clear coated
    5. Front height? 19mm

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #39 on: Wed, 24 June 2020, 02:31:01 »
    i hope change my order

    how can i do?

    I will post a spread sheet and an edit form later.

    Offline rnwns0815

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #40 on: Wed, 24 June 2020, 03:44:33 »
    I cannot modified order sheet, so I put several in. Would it be a problem?

    Offline Danone

    • Posts: 1
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #41 on: Wed, 24 June 2020, 04:56:21 »
    Do you have a render/picture for a HHKB case with a Sand Blasted Brass plate

    Offline Axiom_

    • Posts: 1
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #42 on: Wed, 24 June 2020, 05:10:04 »
    Will the clear brass coating be PVD? Is there an image of the coated brass?
    « Last Edit: Wed, 24 June 2020, 05:14:12 by Axiom_ »

    Offline jmSur

    • Posts: 1
    • Location: Korea
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #43 on: Wed, 24 June 2020, 05:30:04 »
    Please delete order id 83. I just edited my initial order(26).

    Offline ninjacore

    • Posts: 273
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #44 on: Wed, 24 June 2020, 06:40:19 »
    FYI, OPís ďItems Included in Base KitĒ section says +$60 for brass plate, but the form says +$50 for that option.

    Offline ninjacore

    • Posts: 273
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #45 on: Wed, 24 June 2020, 06:50:47 »
    Iím sure itís subject to change, but do you have an estimated cost for shipping to the US - perhaps based off your previous board?

    How much does adding a second board to your order change the total shipping cost? 😁

    Offline Genos

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #46 on: Wed, 24 June 2020, 09:53:23 »
    the aesthetics of this board is awesome, definitely joined in

    Offline fzoi79

    • Posts: 3
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #47 on: Wed, 24 June 2020, 10:06:13 »
    Do I need to fill out the sheet again to add a second case?

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #48 on: Wed, 24 June 2020, 10:41:33 »
    I cannot modified order sheet, so I put several in. Would it be a problem?

    Please make sure you check your order at the Order Check to make sure your selections are correct. Changes should be reflected within a day.

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #49 on: Wed, 24 June 2020, 10:42:31 »
    Will the clear brass coating be PVD? Is there an image of the coated brass?

    Clear coating is not PVD, it's just a clear coating to prevent the brass from rusting.

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #50 on: Wed, 24 June 2020, 10:44:13 »
    Please delete order id 83. I just edited my initial order(26).

     :thumb:

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #51 on: Wed, 24 June 2020, 10:45:08 »
    FYI, OPís ďItems Included in Base KitĒ section says +$60 for brass plate, but the form says +$50 for that option.

    Thanks for letting me know! I have corrected the form.

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #52 on: Wed, 24 June 2020, 10:48:35 »
    Iím sure itís subject to change, but do you have an estimated cost for shipping to the US - perhaps based off your previous board?

    How much does adding a second board to your order change the total shipping cost? 😁

    Previously it costed ~$60 to ship to US, but it costs a lot more now due to the pandemic. Hopefully it will get better later. I do not know how much it will cost to ship another board yet, it all depends on the weight and pricing at the time. It surely won't be more than 2x  :D

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #53 on: Wed, 24 June 2020, 10:48:48 »
    the aesthetics of this board is awesome, definitely joined in

    Thank you!  ;)

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #54 on: Wed, 24 June 2020, 10:49:03 »
    Do I need to fill out the sheet again to add a second case?

    Yes please  :)

    Offline ninjacore

    • Posts: 273
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #55 on: Wed, 24 June 2020, 11:10:20 »
    Iím sure itís subject to change, but do you have an estimated cost for shipping to the US - perhaps based off your previous board?

    How much does adding a second board to your order change the total shipping cost? 😁

    Previously it costed ~$60 to ship to US, but it costs a lot more now due to the pandemic. Hopefully it will get better later. I do not know how much it will cost to ship another board yet, it all depends on the weight and pricing at the time. It surely won't be more than 2x  :D

    Have you considered going through a US vendor to reduce that cost for the buyers?

    Offline Genos

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #56 on: Wed, 24 June 2020, 11:33:15 »
    the aesthetics of this board is awesome, definitely joined in

    Thank you!  ;)

    also! i ended up filling up another form before the order edit form was made, please remove order id 3, i already see my other order on the list ^^

    Offline snoofy

    • Posts: 6
    • Location: kor
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #57 on: Wed, 24 June 2020, 11:52:21 »
    please delete order no.66 and no.71

    Offline snoofy

    • Posts: 6
    • Location: kor
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #58 on: Wed, 24 June 2020, 11:53:20 »
    please delete order no.66 and no.71

    Offline Mayflower

    • Posts: 7
    • Location: Australia
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #59 on: Wed, 24 June 2020, 12:42:17 »
    Do you have any pictures of the brass plate handy?

    Offline surreal19

    • Posts: 3
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #60 on: Wed, 24 June 2020, 14:06:12 »
    can you delete 88 and 90

    Offline consumer

    • Posts: 62
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #61 on: Wed, 24 June 2020, 16:01:25 »
    Where do I check my Order ID?

    Offline mrtoniliu

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #62 on: Wed, 24 June 2020, 18:18:06 »
    Does pcb support c-c connection?

    Offline youreyesonly

    • Posts: 24
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #63 on: Wed, 24 June 2020, 18:27:29 »
    have an example of a black case with white plate??

    Offline kanki0213

    • Posts: 11
    • Location: South Korea
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #64 on: Wed, 24 June 2020, 18:29:50 »
    Definitely in, have a few questions, though.

    1. Any idea how much heavier the brass weight is than the aluminum? roughly 600g
    2. Weight of the brass plate vs. aluminum? roughly 750g
    3. Which hotswap sockets are going to be installed in the hotswap PCBs? mill max 7305? kailh
    4. Will there be any coating on the brass parts? clear coated
    5. Front height? 19mm

    1. Any idea how much heavier the brass weight is than the aluminum? roughly 600g
    =>> Does it mean that the brass weight is 600g heavier than alu weight?

    2. Weight of the brass plate vs. aluminum? roughly 750g
    =>> Does it mean that the brass plate is 750g heavier than alu?

    Offline Lulu1777

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #65 on: Wed, 24 June 2020, 19:11:27 »
    Hi could you delete my order ID 21, order ID 9 is my real order thanks :)

    Offline consumer

    • Posts: 62
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #66 on: Wed, 24 June 2020, 20:01:08 »
    I would like to edit/change my order. Where is the Order ID spreadsheet posted?

    Offline OXY-Gen

    • Posts: 8
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #67 on: Wed, 24 June 2020, 22:21:13 »
    is it just me or is the order check sheet not updating?

    Offline joe405

    • Posts: 37
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #68 on: Thu, 25 June 2020, 01:26:47 »
    Would be nice to have a render of brass plate especially with blockers. I'm leaning towards hhkb brass with PC or black case

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #69 on: Thu, 25 June 2020, 02:31:06 »
    Do you have any pictures of the brass plate handy?

    Just added some photos of the brass plate of SQUARE 80

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #70 on: Thu, 25 June 2020, 02:32:02 »
    Do you have a render/picture for a HHKB case with a Sand Blasted Brass plate

    I added two pictures of the brass plate from previous GB, hopefully it helps.

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #71 on: Thu, 25 June 2020, 02:34:02 »
    Iím sure itís subject to change, but do you have an estimated cost for shipping to the US - perhaps based off your previous board?

    How much does adding a second board to your order change the total shipping cost? 😁

    Previously it costed ~$60 to ship to US, but it costs a lot more now due to the pandemic. Hopefully it will get better later. I do not know how much it will cost to ship another board yet, it all depends on the weight and pricing at the time. It surely won't be more than 2x  :D

    Have you considered going through a US vendor to reduce that cost for the buyers?

    not at this point

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #72 on: Thu, 25 June 2020, 02:34:34 »
    have an example of a black case with white plate??

    unfortunately I don't have a render of that color combo

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #73 on: Thu, 25 June 2020, 02:36:31 »
    Definitely in, have a few questions, though.

    1. Any idea how much heavier the brass weight is than the aluminum? roughly 600g
    2. Weight of the brass plate vs. aluminum? roughly 750g
    3. Which hotswap sockets are going to be installed in the hotswap PCBs? mill max 7305? kailh
    4. Will there be any coating on the brass parts? clear coated
    5. Front height? 19mm

    1. Any idea how much heavier the brass weight is than the aluminum? roughly 600g
    =>> Does it mean that the brass weight is 600g heavier than alu weight?

    2. Weight of the brass plate vs. aluminum? roughly 750g
    =>> Does it mean that the brass plate is 750g heavier than alu?

    Clarification - those are the estimated weight of the brass weight/plate I got from the manufacturer, I actually don't have the exact weight measured. They also told me today that the brass plate will be closer to 1000g.

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #74 on: Thu, 25 June 2020, 02:39:49 »
    Would be nice to have a render of brass plate especially with blockers. I'm leaning towards hhkb brass with PC or black case

    Please check the last 2 photos for reference.

    Offline OXY-Gen

    • Posts: 8
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #75 on: Thu, 25 June 2020, 02:44:23 »
    Hello there.
    can you remove order 204?

    Offline ders19

    • Posts: 1
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #76 on: Thu, 25 June 2020, 06:31:20 »
    Hello could you please remove order 154 and 156 thanks

    Offline Ozakiis12

    • Posts: 6
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #77 on: Thu, 25 June 2020, 07:58:34 »
    I've finally decided on full 60 layout instead of hhkb. Please cancel the two previous HHKB orders (same username). Thank you - excited!

    Edit: Please cancel order 27 and the placed order for the full 60, which you have yet to add... (sorry, could not make up my mind before lol) Thanks!
    « Last Edit: Thu, 25 June 2020, 09:14:54 by Ozakiis12 »

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #78 on: Thu, 25 June 2020, 10:23:03 »
    Does pcb support c-c connection?
    Yes

    Offline Xsty

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #79 on: Thu, 25 June 2020, 10:54:12 »
    I just got the invoice and saw that I had an additional PCB ordered, I went ahead and edit my order form to remove the additional PCB, would I be receiving a different Invoice soon?

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #80 on: Thu, 25 June 2020, 11:42:22 »
    I just got the invoice and saw that I had an additional PCB ordered, I went ahead and edit my order form to remove the additional PCB, would I be receiving a different Invoice soon?
    Hi,Can you provide me your order number?  I sent it to you after update

    Offline nalra8095

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #81 on: Thu, 25 June 2020, 11:46:39 »
    Hello : )

    I just got invoice from you, but I had changed my order using your google survey.
    Could you check my last order and give edited invoice? My order no is 75.

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #82 on: Thu, 25 June 2020, 12:05:33 »
    Hello : )

    I just got invoice from you, but I had changed my order using your google survey.
    Could you check my last order and give edited invoice? My order no is 75.
    I see your choice on the form: case color: pc/plate: e-yellow/full plate/layout: hhkb/brass weight.  right?

    Offline nalra8095

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #83 on: Thu, 25 June 2020, 12:16:39 »
    Hello : )

    I just got invoice from you, but I had changed my order using your google survey.
    Could you check my last order and give edited invoice? My order no is 75.
    I see your choice on the form: case color: pc/plate: e-yellow/full plate/layout: hhkb/brass weight.  right?


    No, that was on my first form. I changed weight brass to e-yellow and fill the Edit form. Can you check edited form? If you couldn't, I will re-fill google form.

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #84 on: Thu, 25 June 2020, 12:32:25 »
    Hello : )

    I just got invoice from you, but I had changed my order using your google survey.
    Could you check my last order and give edited invoice? My order no is 75.
    I see your choice on the form: case color: pc/plate: e-yellow/full plate/layout: hhkb/brass weight.  right?

    Ok i will re-send you the new invoice :D

    No, that was on my first form. I changed weight brass to e-yellow and fill the Edit form. Can you check edited form? If you couldn't, I will re-fill google form.

    Offline Xsty

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #85 on: Thu, 25 June 2020, 13:09:53 »
    I just got the invoice and saw that I had an additional PCB ordered, I went ahead and edit my order form to remove the additional PCB, would I be receiving a different Invoice soon?
    Hi,Can you provide me your order number?  I sent it to you after update

    I just got an updated invoice, Thanks!

    Offline VytrioL

    • Posts: 4
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #86 on: Thu, 25 June 2020, 22:31:27 »
    When should I expect an invoice if I submitted a form yesterday?

    Sent from my SM-G965U using Tapatalk


    Offline Nediah

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #87 on: Thu, 25 June 2020, 22:51:58 »
    Is there a ďtime limitĒ after receiving the invoice to pay it?  If so, how long would that be?

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #88 on: Fri, 26 June 2020, 02:08:22 »
    I am starting to send invoices out, the deadline to pay is 2 days after GB.

    Offline BachNgocLaoHo

    • Posts: 1
    • Location: Vietnam
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #89 on: Fri, 26 June 2020, 03:06:19 »
    I have had invoice from iNETT Studio. If i want update items, how can i do that before i paid invoice?
    « Last Edit: Fri, 26 June 2020, 06:46:43 by BachNgocLaoHo »

    Offline prizeS

    • Posts: 51
    • Location: Orange County, CA
    • multiple keysets per keyboard? sign me up.
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #90 on: Fri, 26 June 2020, 03:38:23 »
    I am starting to send invoices out, the deadline to pay is 2 days after GB.

    ill keep an eye out and check my paypal everyday then. haven't been receiving email notifications for invoices for some reason.

    Offline BanhMi

    • Posts: 1
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #91 on: Fri, 26 June 2020, 04:37:15 »
    I got 2 of the same invoices do I just ignore the 2nd one. :blank:

    Offline duckunz

    • Posts: 4
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #92 on: Fri, 26 June 2020, 04:41:30 »
    I didn't get any invoice.. tho according to the form, I ordered pretty soon.

    Offline fzoi79

    • Posts: 3
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #93 on: Fri, 26 June 2020, 05:31:28 »
    I have not received an invoice for the second car.

    Offline Nediah

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #94 on: Fri, 26 June 2020, 05:39:32 »
    I am starting to send invoices out, the deadline to pay is 2 days after GB.
    So if I was to order on the 28th, the deadline would include the 28th or not?

    Offline Ozakiis12

    • Posts: 6
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #95 on: Fri, 26 June 2020, 05:52:12 »
    Please cancel order 12. Thank you.

    Offline theside123

    • Posts: 16
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #96 on: Fri, 26 June 2020, 06:49:34 »

    Housing white
    Plate red
    Can you see the happy hacking combination render??

    Offline rnwns0815

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #97 on: Fri, 26 June 2020, 11:22:53 »
    Hey i Have not recieved invoice. My order is 82 and 92. Please check my order^^

    Offline supern00b

    • Posts: 9
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #98 on: Fri, 26 June 2020, 11:57:38 »
    Please cancel invoice# 289, thanks

    Offline Kurigohan

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #99 on: Fri, 26 June 2020, 14:08:18 »
    Can you change the plate to e-white for order 217 please? Thanks.

    Offline Amorou Kithkin

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #100 on: Fri, 26 June 2020, 14:50:15 »
    Please remove order 181. Thank you.

    Offline consumer

    • Posts: 62
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #101 on: Fri, 26 June 2020, 18:54:58 »
    Please cancel/remove order 167. I submitted an edit for my order two days ago, spreadsheet still showing the initial details. PM'd but still no reply or changes on the spreadsheet. Got an invoice today, so I'm not too sure what I'm pre-ordering. Sorry this is not good enough.

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #102 on: Fri, 26 June 2020, 19:49:10 »
    I got 2 of the same invoices do I just ignore the 2nd one. :blank:

    Yes please, sorry about that!

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #103 on: Fri, 26 June 2020, 19:49:49 »
    I have had invoice from iNETT Studio. If i want update items, how can i do that before i paid invoice?

    Please PM me with the Order ID and what you want to change, thanks!

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #104 on: Fri, 26 June 2020, 19:53:12 »
    Please cancel/remove order 167. I submitted an edit for my order two days ago, spreadsheet still showing the initial details. PM'd but still no reply or changes on the spreadsheet. Got an invoice today, so I'm not too sure what I'm pre-ordering. Sorry this is not good enough.

    My sincere apologies. The amount of edits I am receiving is just too much so I have changed the way for doing edits. I have crossed out your order, please submit another GB form if you change your mind. Sorry again!

    Offline OXY-Gen

    • Posts: 8
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #105 on: Sat, 27 June 2020, 01:21:38 »
    When will order edits appear? got 2 invoices today even though I thought i canceled the other one. I also have no idea what im buying because the sheet hasnt updated to the edit form.
    It also seems that both invoices i got is outdated from edited.
    #205
    « Last Edit: Sat, 27 June 2020, 01:28:32 by OXY-Gen »

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #106 on: Sat, 27 June 2020, 01:44:22 »
    When will order edits appear? got 2 invoices today even though I thought i canceled the other one. I also have no idea what im buying because the sheet hasnt updated to the edit form.
    It also seems that both invoices i got is outdated from edited.
    #205
    I have updated the invoice according to your order.  Please proofread :thumb:

    Offline prizeS

    • Posts: 51
    • Location: Orange County, CA
    • multiple keysets per keyboard? sign me up.
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #107 on: Sat, 27 June 2020, 03:08:08 »
    Poor Simen with all these edits. Y'all the GB is open for a week make up your mind before submitting it lol

    Offline OXY-Gen

    • Posts: 8
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #108 on: Sat, 27 June 2020, 03:10:35 »
    When will order edits appear? got 2 invoices today even though I thought i canceled the other one. I also have no idea what im buying because the sheet hasnt updated to the edit form.
    It also seems that both invoices i got is outdated from edited.
    #205
    I have updated the invoice according to your order.  Please proofread :thumb:
    Received and correct. Thanks

    Offline Lotsati

    • Posts: 38
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #109 on: Sat, 27 June 2020, 04:02:24 »
    Looking to buy just the PCBs from this GB if anyone is interested in throwing extra ones on their order (I'm not getting a case myself). Can pay up front as well.

    Offline ZangKurry

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #110 on: Sat, 27 June 2020, 04:53:42 »
    hi, i got my invoice for order 120, but the details on it is not correct since I updated my entry. Also, I am not sure if the invoice is hot swap or not since i changed that to be hot swap. Can I get a new invoice? thank you !

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #111 on: Sat, 27 June 2020, 06:11:32 »
    hi, i got my invoice for order 120, but the details on it is not correct since I updated my entry. Also, I am not sure if the invoice is hot swap or not since i changed that to be hot swap. Can I get a new invoice? thank you !
    I have updated the invoice according to your order.  Please proofread  :D

    Offline Tekilashot

    • Posts: 19
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #112 on: Sat, 27 June 2020, 06:29:06 »
    Is there a photo of the keeb with the half plate ? Does it change something to the aesthetic ?

    Offline ninjacore

    • Posts: 273
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #113 on: Sat, 27 June 2020, 10:54:41 »
    Should we PM you w order-related questions, OP, or post here?

    Offline kabocha

    • Posts: 23
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #114 on: Sat, 27 June 2020, 13:02:14 »
    just put in my orders!

    *crud just realized that I picked a wrong option. Going to submit another order and cancel the other when the order checks are up for them
    « Last Edit: Sat, 27 June 2020, 13:07:10 by kabocha »

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #115 on: Sat, 27 June 2020, 14:41:16 »
    Is there a photo of the keeb with the half plate ? Does it change something to the aesthetic ?
    There is an exploded view on the IC page. You can't really tell the difference visually once keycaps are on.

    Offline OXY-Gen

    • Posts: 8
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #116 on: Sat, 27 June 2020, 16:25:44 »
    Whats the due date for the invoice?

    Offline prizeS

    • Posts: 51
    • Location: Orange County, CA
    • multiple keysets per keyboard? sign me up.
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #117 on: Sat, 27 June 2020, 21:05:21 »
    Whats the due date for the invoice?

    it says on the invoice itself. june 30.

    Offline ninjacore

    • Posts: 273
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #118 on: Sat, 27 June 2020, 21:14:01 »
    For those who ordered more than 1 board, did you receive multiple invoices?  Is it possible to have my two orders combined into one invoice, OP?  I would obviously like them to go out at the same time (same shipment).  Thanks

    Offline thestrayed

    • Posts: 1
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #119 on: Sat, 27 June 2020, 21:58:04 »
    Can you cancel order #332? I wanted to update my configuration. So I added another order with the new config. So I don't need a previous order (#332) anymore.

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #120 on: Sat, 27 June 2020, 22:00:12 »
    For those who ordered more than 1 board, did you receive multiple invoices?  Is it possible to have my two orders combined into one invoice, OP?  I would obviously like them to go out at the same time (same shipment).  Thanks

    We will invoice for shipping again later when the units are ready to ship. Combined shipping will be handled at that time.

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #121 on: Sat, 27 June 2020, 22:00:53 »
    Can you cancel order #332? I wanted to update my configuration. So I added another order with the new config. So I don't need a previous order (#332) anymore.

    Please fill out an order cancel form if you haven't already done so. Thanks!

    Offline Rew23

    • Posts: 25
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #122 on: Sun, 28 June 2020, 00:02:33 »
    Is it possible to purchase more than one additional PCB?

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #123 on: Sun, 28 June 2020, 06:31:21 »
    Is it possible to purchase more than one additional PCB?
    Can add an additional pcb

    Offline Curin Derwin

    • Posts: 11
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #124 on: Sun, 28 June 2020, 08:59:04 »
    Can I order two keyboards? How can I do that?

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #125 on: Sun, 28 June 2020, 09:13:37 »
    Can I order two keyboards? How can I do that?
    Just fill in the form record twice :D

    Offline yhs

    • Posts: 28
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #126 on: Sun, 28 June 2020, 09:56:25 »
    Invoice 316 - possible to change plate from WKL to HHKB and to half-coverage?
    « Last Edit: Sun, 28 June 2020, 09:59:43 by yhs »

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #127 on: Sun, 28 June 2020, 10:39:29 »
    Invoice 316 - possible to change plate from WKL to HHKB and to half-coverage?
    I have updated invoice

    Offline Axariel

    • Posts: 16
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #128 on: Sun, 28 June 2020, 16:45:52 »
    Will the clear brass coating be PVD? Is there an image of the coated brass?

    Clear coating is not PVD, it's just a clear coating to prevent the brass from rusting.

    What will you be using if you hop on before GB close?

    Offline Ozakiis12

    • Posts: 6
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #129 on: Sun, 28 June 2020, 18:49:30 »
    Hey, just a headsup;

    Please cancel all my orders. Iíve done some math and rn is not the time to join a group buy unfortunatly. Thanks!

    Nvm, just placed a new order!
    « Last Edit: Sun, 28 June 2020, 21:53:06 by Ozakiis12 »

    Offline Curin Derwin

    • Posts: 11
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #130 on: Sun, 28 June 2020, 20:36:11 »
    What is the gain/difference/benefit of a half-plate? More flex for linears?

    Also, are all PCBs yellow/orange? If so, is there a blocker to block the color of the PCB in PC?
    « Last Edit: Sun, 28 June 2020, 21:12:15 by Curin Derwin »

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #131 on: Mon, 29 June 2020, 01:23:26 »
    What is the gain/difference/benefit of a half-plate? More flex for linears?

    Also, are all PCBs yellow/orange? If so, is there a blocker to block the color of the PCB in PC?

    Half plate offer a softer typing experience. PCBs will be yellow. Not sure what you meant on the last question, please check the photos.

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #132 on: Mon, 29 June 2020, 01:27:29 »
    Hi all. Thank you for participating in this group buy. The order phase has completed and the rest of the invoices will go out soon. Please pay your invoice before the deadline to avoid cancelation of your order.  :thumb:

    Offline Curin Derwin

    • Posts: 11
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #133 on: Mon, 29 June 2020, 04:54:07 »
    What is the gain/difference/benefit of a half-plate? More flex for linears?

    Also, are all PCBs yellow/orange? If so, is there a blocker to block the color of the PCB in PC?

    Half plate offer a softer typing experience. PCBs will be yellow. Not sure what you meant on the last question, please check the photos.

    Got it. Can I please add an additional HHKB ewhite half-plate and solderable PCB. Can I also please purchase extra sets of screws? Order# 405

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #134 on: Mon, 29 June 2020, 05:05:54 »
    What is the gain/difference/benefit of a half-plate? More flex for linears?

    Also, are all PCBs yellow/orange? If so, is there a blocker to block the color of the PCB in PC?

    Half plate offer a softer typing experience. PCBs will be yellow. Not sure what you meant on the last question, please check the photos.


    Got it. Can I please add an additional HHKB ewhite half-plate and solderable PCB. Can I also please purchase extra sets of screws? Order# 405
    I checked your order and found that you have purchased additional plate and pcb.So it can't be added anymore :)

    Offline Curin Derwin

    • Posts: 11
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #135 on: Mon, 29 June 2020, 06:29:28 »
    What is the gain/difference/benefit of a half-plate? More flex for linears?

    Also, are all PCBs yellow/orange? If so, is there a blocker to block the color of the PCB in PC?

    Half plate offer a softer typing experience. PCBs will be yellow. Not sure what you meant on the last question, please check the photos.


    Got it. Can I please add an additional HHKB ewhite half-plate and solderable PCB. Can I also please purchase extra sets of screws? Order# 405
    I checked your order and found that you have purchased additional plate and pcb.So it can't be added anymore :)
    Thank you. PM'd

    Offline fzoi79

    • Posts: 3
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #136 on: Mon, 29 June 2020, 06:59:53 »
    Are there plenty of LED effects to choose from?

    Offline ninjacore

    • Posts: 273
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #137 on: Mon, 29 June 2020, 08:18:40 »
    Hey, just a headsup;

    Please cancel all my orders. Iíve done some math and rn is not the time to join a group buy unfortunatly. Thanks!

    Nvm, just placed a new order!

    ^^ This guy only has one kidney now!

    Offline Ozakiis12

    • Posts: 6
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #138 on: Mon, 29 June 2020, 10:02:21 »
    Hey, just a headsup;

    Please cancel all my orders. Iíve done some math and rn is not the time to join a group buy unfortunatly. Thanks!

    Nvm, just placed a new order!

    ^^ This guy only has one kidney now!

    You gotta do what you gotta do  ;D

    Offline Droplit

    • Posts: 3
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #139 on: Mon, 29 June 2020, 10:37:16 »
    Hello!
    Is there any chance you could change the case in order 212 from ano-black to Polycarbonate?
    Thank you

    Offline Curin Derwin

    • Posts: 11
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #140 on: Mon, 29 June 2020, 11:12:14 »
    What is the gain/difference/benefit of a half-plate? More flex for linears?

    Also, are all PCBs yellow/orange? If so, is there a blocker to block the color of the PCB in PC?

    Half plate offer a softer typing experience. PCBs will be yellow. Not sure what you meant on the last question, please check the photos.


    Got it. Can I please add an additional HHKB ewhite half-plate and solderable PCB. Can I also please purchase extra sets of screws? Order# 405
    I checked your order and found that you have purchased additional plate and pcb.So it can't be added anymore :)

    It looks like my last PM may have been lost in transmission. Resent. Thank you!

    Offline crash74

    • Posts: 2
    • Location: Singapore
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #141 on: Mon, 29 June 2020, 11:34:51 »
    a summary...


    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #142 on: Mon, 29 June 2020, 11:37:56 »
    Hello!
    Is there any chance you could change the case in order 212 from ano-black to Polycarbonate?
    Thank you
    no problem

    Offline Curin Derwin

    • Posts: 11
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #143 on: Mon, 29 June 2020, 12:45:29 »
    a summary...

    Show Image

    Great pivot!

    I wonder if the the color of the PCB inside of the clear housing played a role in the plate color selection. Hypothesis: it did.

    Offline Droplit

    • Posts: 3
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #144 on: Mon, 29 June 2020, 12:59:26 »
    Hello!
    Is there any chance you could change the case in order 212 from ano-black to Polycarbonate?
    Thank you
    no problem
    Thanks! Will I need a new invoice? Or if I pay the one I already got it will be updated correctly. The invoice says it's still ano black

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #145 on: Mon, 29 June 2020, 13:19:21 »
    Hello!
    Is there any chance you could change the case in order 212 from ano-black to Polycarbonate?
    Thank you
    no problem
    Thanks! Will I need a new invoice? Or if I pay the one I already got it will be updated correctly. The invoice says it's still ano black
    Provide your invoice number, I will update :D

    Offline Droplit

    • Posts: 3
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #146 on: Mon, 29 June 2020, 13:23:23 »
    Hello!
    Is there any chance you could change the case in order 212 from ano-black to Polycarbonate?
    Thank you
    no problem
    Thanks! Will I need a new invoice? Or if I pay the one I already got it will be updated correctly. The invoice says it's still ano black
    Provide your invoice number, I will update :D
    It's order #0358! Thanks for the help

    Offline ninjacore

    • Posts: 273
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #147 on: Mon, 29 June 2020, 14:09:53 »
    a summary...

    Show Image

    Great pivot!

    I wonder if the the color of the PCB inside of the clear housing played a role in the plate color selection. Hypothesis: it did.

    Also playing a part: the 2 YouTube reviews :)

    Offline Amorou Kithkin

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #148 on: Mon, 29 June 2020, 14:36:46 »
    .
    « Last Edit: Mon, 29 June 2020, 18:21:50 by Amorou Kithkin »

    Offline Rhapsodixx

    • Posts: 4
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #149 on: Mon, 29 June 2020, 17:52:11 »
    order id 343 paid broo  :) there goes my savings

    Offline Lulu1777

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #150 on: Mon, 29 June 2020, 19:00:12 »
    Hi my invoice number is 0164 and id like to change from wkl to wk layout, thanks, sorry for the inconvenience

    Offline ZangKurry

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #151 on: Tue, 30 June 2020, 00:38:28 »
    hi i paid for the invoice #0490 ( order 357 ) but I got 2 more invoice emails after that. Should I ignore them ?

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #152 on: Tue, 30 June 2020, 02:28:16 »
    hi i paid for the invoice #0490 ( order 357 ) but I got 2 more invoice emails after that. Should I ignore them ?
    Please ignore or cancel them.

    Offline wwnbb

    • Posts: 1
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #153 on: Tue, 30 June 2020, 10:50:50 »
    Hello my invoce number is №0505, i can't pay to your invoce since some PayPal issue, i all ready contacted with PayPal support but they didn't fixed my issue, if they ignore me for more than one day is there a way to extend payment date?

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #154 on: Tue, 30 June 2020, 11:43:27 »
    Hello my invoce number is №0505, i can't pay to your invoce since some PayPal issue, i all ready contacted with PayPal support but they didn't fixed my issue, if they ignore me for more than one day is there a way to extend payment date?
    If there are special circumstances, please chat with me privately, we will deal with it further :thumb:

    Offline MajorShy

    • Posts: 15
    • Location: Canada
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #155 on: Tue, 30 June 2020, 12:16:13 »
    Hi there, came in here late are you still taking orders?

    Offline OXY-Gen

    • Posts: 8
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #156 on: Tue, 30 June 2020, 21:52:34 »
    where will updates be posted? is there discord?

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #157 on: Wed, 01 July 2020, 09:18:23 »
    where will updates be posted? is there discord?
    We will update at least once a month, will be updated on geekhack gb posts and instagram. :thumb:

    Offline hanlehigh

    • Posts: 1
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #158 on: Sat, 04 July 2020, 22:55:02 »
    Hello Simon, could you double check on order ID 307? Paid successfully, wondering why it's cancelled.

    Offline Kurigohan

    • Posts: 2
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #159 on: Sun, 05 July 2020, 00:16:31 »
    Can you can check order 217 as well? I paid for it but it looks like it's marked as cancelled in the order form?

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #160 on: Sun, 05 July 2020, 03:17:04 »
    Can you can check order 217 as well? I paid for it but it looks like it's marked as cancelled in the order form?
    I have updated it, please check it. :thumb:

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #161 on: Sun, 05 July 2020, 03:17:41 »
    Hello Simon, could you double check on order ID 307? Paid successfully, wondering why it's cancelled.
    I have updated it, please check it. :thumb:

    Offline gnhuy91

    • Posts: 104
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #162 on: Sun, 05 July 2020, 06:41:22 »
    I have updated it, please check it. :thumb:

    Can I still change my paid order?

    Offline Simen

    • Thread Starter
    • Posts: 243
    Re: [GB] iNETT Studio:SQUARE.X 60% Keyboard
    « Reply #163 on: Sun, 05 July 2020, 09:40:32 »
    I have updated it, please check it. :thumb:

    Can I still change my paid order?
    It can't be modified now, and the review stage is in progress. q :thumb: