Author Topic: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL  (Read 13823 times)

0 Members and 1 Guest are viewing this topic.

Offline SirShakes

  • Posts: 50
  • Location: SoCal
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #50 on: Sun, 21 March 2021, 15:10:06 »
RBB hype

Offline lush_bunny

  • Posts: 547
  • Location: Philippines
  • 1 Custom In Hand, 3 out in the wild
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #51 on: Sun, 21 March 2021, 16:13:20 »
Can you use an O-ring here?

Offline Krelbit

  • Posts: 355
  • Location: Minnesota
  • Switchmod.net
    • Switchmod
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #52 on: Sun, 21 March 2021, 16:20:10 »
Can you use an O-ring here?

I mean, it wasn't designed with an o-ring in mind. I would assume no, or at the very least it probably won't be tested.

Offline bisoromi

  • Formerly Duwang
  • Posts: 186
  • Location: D[M]V
  • owo
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #53 on: Sun, 21 March 2021, 16:28:25 »
ara ara im bad boy
(credits to Kokaloo)

Offline zekkin

  • Thread Starter
  • Posts: 481
  • Location: New York
  • my entire life was unlimited zekk works
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #54 on: Sun, 21 March 2021, 16:33:48 »
Can you use an O-ring here?

Hello! No o-ring this time -- this will be pure top mount.
Daily Driver: TGR-Jane v2 CE
TGR-Alice | TGR-Jane v2 | Rosenthal | Matrix Lab 8xv2.0 | Ogre (PC) | Yves | KFE | hbcp | Vulcan

Offline lush_bunny

  • Posts: 547
  • Location: Philippines
  • 1 Custom In Hand, 3 out in the wild
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #55 on: Sun, 21 March 2021, 16:43:40 »
Can you use an O-ring here?

Hello! No o-ring this time -- this will be pure top mount.

I see. Does this mean I need some foam for the bottom of the PCB to eliminate ping?

Offline Ramen Champ

  • Posts: 53
  • Location: Socal
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #56 on: Sun, 21 March 2021, 16:44:39 »
i like kpop aluminum
twitch.tv/ramenchamp_

Offline Razz1023

  • Posts: 4
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #57 on: Sun, 21 March 2021, 16:45:32 »
Beautiful keyboard

Offline skrunk

  • Posts: 55
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #58 on: Sun, 21 March 2021, 17:12:02 »
Very nice, keeping my eye on this board.

Offline Ustinj

  • Posts: 175
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #59 on: Sun, 21 March 2021, 17:25:58 »
nais final form

Offline goddream

  • Posts: 91
  • Location: Australia
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #60 on: Sun, 21 March 2021, 17:38:45 »
zekkW zekkW
huh

Offline alwayswarren

  • Posts: 10
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #61 on: Sun, 21 March 2021, 19:44:00 »
Can't wait, always great stuff from you Zekk.

Offline hineybush

  • * Maker
  • Posts: 1548
  • Location: Pittsburgh, PA, USA
  • student of error
    • hineybush keyboards
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #62 on: Sun, 21 March 2021, 20:04:24 »
Can you use an O-ring here?

Hello! No o-ring this time -- this will be pure top mount.

I see. Does this mean I need some foam for the bottom of the PCB to eliminate ping?

good keyboards don't need extra stuff

Offline NRbigfoot

  • Posts: 57
  • Location: DN
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #63 on: Sun, 21 March 2021, 20:09:46 »
Board looks sick, always solid designs from Zekk
HBCP | FLX Virgo | Evolv | Anniversary Whale | aanzee | JER-A06 | Mira SE | Leaf 80 | HHKB pro 1 | qxp | Rukia | IDB60 | equinox | No1Rev1 | Whale | Montage | 268.2

Offline lush_bunny

  • Posts: 547
  • Location: Philippines
  • 1 Custom In Hand, 3 out in the wild
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #64 on: Sun, 21 March 2021, 21:07:56 »
Can you use an O-ring here?

Hello! No o-ring this time -- this will be pure top mount.


I see. Does this mean I need some foam for the bottom of the PCB to eliminate ping?

good keyboards don't need extra stuff

In Hiney and Zekk we trust. Out with the foam then.

Offline Jefff

  • Posts: 83
  • Location: California, USA
    • jlabs.co
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #65 on: Sun, 21 March 2021, 23:14:38 »
I like it!

Offline finalarcadia

  • Posts: 305
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #66 on: Sun, 21 March 2021, 23:23:57 »
Very cool overall but I really don't care for those engravings  :-X I'd stick with just the ZJ, front or back is fine. Just a suggestion, anyway good luck with IC!

Offline meiosis

  • * Esteemed Elder
  • Posts: 1277
  • Location: 408
  • Time
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #67 on: Sun, 21 March 2021, 23:24:05 »
nicee
Keyboards:
Filco Majestouch 2 - Sakura Edition [MX Blue]
Filco Majestouch 2 - Lotus Edition [MX Brown]
Realforce 23ub - Modded with 55g Domes.
Aripeko TKL

Offline Hi !!

  • Posts: 16
  • Location: World
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #68 on: Mon, 22 March 2021, 00:01:19 »
RBB! RBB!

Offline zekkin

  • Thread Starter
  • Posts: 481
  • Location: New York
  • my entire life was unlimited zekk works
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #69 on: Mon, 22 March 2021, 00:31:28 »
All renders in the OP have been updated to be a little nicer.
Daily Driver: TGR-Jane v2 CE
TGR-Alice | TGR-Jane v2 | Rosenthal | Matrix Lab 8xv2.0 | Ogre (PC) | Yves | KFE | hbcp | Vulcan

Offline mawli

  • Posts: 11
  • Banana peel goes bloop
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #70 on: Mon, 22 March 2021, 00:47:11 »
That green looks so nice

Offline paqji

  • Posts: 9
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #71 on: Mon, 22 March 2021, 01:39:30 »
very sick, thank u for another chance at a zekk board, the idea of 2 plates per kit is a good one!!!

Offline Brioric

  • Posts: 10
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #72 on: Mon, 22 March 2021, 02:10:42 »
Really excited for this one  :D

Offline kk73715

  • Posts: 109
  • Location: Hong Kong
  • Why are you even reading
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #73 on: Mon, 22 March 2021, 03:59:34 »
what is the front height? (perpendicular distance from the desk to the front of the r4 keycap) or effective keyboard height? https://github.com/Croktopus/effective-keyboard-height
what are the plate materials available? sorry if I missed it in the main post, I can't seem to find it
renders of the plate?
will the plate be contacting the top case along the perimeter of the top case internals? again, might be me not being able to see it properly

GLWIC

Offline zekkin

  • Thread Starter
  • Posts: 481
  • Location: New York
  • my entire life was unlimited zekk works
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #74 on: Mon, 22 March 2021, 08:12:11 »
what is the front height? (perpendicular distance from the desk to the front of the r4 keycap) or effective keyboard height? https://github.com/Croktopus/effective-keyboard-height

Front face height: 17.8mm
EKH: 22.1mm

what are the plate materials available? sorry if I missed it in the main post, I can't seem to find it

This is in the main OP:

GB Details
  • Sale format: 75 units (50 public raffle/25 FnF)
  • Start Time: ~July 2021
  • Fixed kit: Keyboard, 2 plates (1x 2mm PC/1x 1.5mm Aluminum), 1-2 PCBs (TBD in IC)
  • Price: TBD after receipt of prototype

renders of the plate?
will the plate be contacting the top case along the perimeter of the top case internals? again, might be me not being able to see it properly





And yes, the plate makes contact with the perimeter of the top case internals so as to not show and unsightly gap between the plate and top case.

Hope all that is helpful.
« Last Edit: Mon, 22 March 2021, 08:57:44 by zekkin »
Daily Driver: TGR-Jane v2 CE
TGR-Alice | TGR-Jane v2 | Rosenthal | Matrix Lab 8xv2.0 | Ogre (PC) | Yves | KFE | hbcp | Vulcan

Offline mech0nly

  • Posts: 187
  • Location: ID
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #75 on: Mon, 22 March 2021, 08:16:17 »
filled the form. very interesting design, zekk :)
keyboards are keyboards

Offline Quinella

  • Posts: 62
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #76 on: Mon, 22 March 2021, 08:40:05 »
glwic zekk

Offline chriszhu

  • Posts: 117
  • Location: Toronto
  • (* ̄(エ) ̄*)''
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #77 on: Mon, 22 March 2021, 09:07:55 »
Super nice, hopefully lucky with this one 🙊

Offline lush_bunny

  • Posts: 547
  • Location: Philippines
  • 1 Custom In Hand, 3 out in the wild
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #78 on: Mon, 22 March 2021, 11:37:39 »
If I died today, and it turns out that not only is God real, but he's actually a zekk TKL with a Hiney PCB, MX Browns, and Handerbait, I wouldn't even be mad.
Fingers crossed for a good price when the proto arrives, my wallet can only take so much right now.

Also, I've never joined a raffle before, how does that work? Input your email and if you "win" a slot, you get an email requesting payment details?

Offline zekkin

  • Thread Starter
  • Posts: 481
  • Location: New York
  • my entire life was unlimited zekk works
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #79 on: Mon, 22 March 2021, 14:23:41 »
Also, I've never joined a raffle before, how does that work? Input your email and if you "win" a slot, you get an email requesting payment details?

In a nutshell, yes.
Daily Driver: TGR-Jane v2 CE
TGR-Alice | TGR-Jane v2 | Rosenthal | Matrix Lab 8xv2.0 | Ogre (PC) | Yves | KFE | hbcp | Vulcan

Offline anatworkaccount

  • Posts: 74
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #80 on: Mon, 22 March 2021, 14:42:39 »
I wish Zekk was my friend :(

Offline lush_bunny

  • Posts: 547
  • Location: Philippines
  • 1 Custom In Hand, 3 out in the wild
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #81 on: Mon, 22 March 2021, 15:41:17 »
Zekk is my friend. I know it, but he doesn't.

Offline dimo

  • Posts: 587
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #82 on: Mon, 22 March 2021, 15:56:13 »
i like the front engraving :]

Offline iNViSiBiLiTi

  • Posts: 200
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #83 on: Mon, 22 March 2021, 17:54:42 »
Nice idea with the plates :)  Seems like my preaching is working. 
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline kk73715

  • Posts: 109
  • Location: Hong Kong
  • Why are you even reading
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #84 on: Tue, 23 March 2021, 02:01:20 »
Hope all that is helpful.

Thanks for the reply Zekkin- very helpful indeed! Apologies again for not reading the IC thoroughly.

Offline Dyto69

  • Posts: 28
  • Location: Germany
  • 420 blaze it but dont forget 69
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #85 on: Tue, 23 March 2021, 03:15:19 »
wow that internal waterfall

Offline lush_bunny

  • Posts: 547
  • Location: Philippines
  • 1 Custom In Hand, 3 out in the wild
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #86 on: Tue, 23 March 2021, 04:24:53 »
Will we get a build and sound test before GB?

coughThaxcough

Offline brandkeebs

  • Posts: 10
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #87 on: Tue, 23 March 2021, 18:26:32 »
please lord almighty giveth me a zekkeeb 1 time

Offline dr_huru

  • Posts: 8
  • Location: Southern California
    • Dr Huru's Youtube Channel
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #88 on: Tue, 23 March 2021, 18:33:16 »
RBB looks so sick!

Offline zekkin

  • Thread Starter
  • Posts: 481
  • Location: New York
  • my entire life was unlimited zekk works
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #89 on: Tue, 23 March 2021, 19:07:36 »
Will we get a build and sound test before GB?

coughThaxcough

I'm hoping to send this prototype to a few buddies who happen to stream so people can see it and I can get their feedback.
Daily Driver: TGR-Jane v2 CE
TGR-Alice | TGR-Jane v2 | Rosenthal | Matrix Lab 8xv2.0 | Ogre (PC) | Yves | KFE | hbcp | Vulcan

Offline Serioussam

  • Posts: 1
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #90 on: Wed, 24 March 2021, 03:48:11 »
Cant wait for the streams.  ;D

Offline danawanb

  • Posts: 8
  • Location: somewhere
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #91 on: Wed, 24 March 2021, 05:41:24 »
really bad boy

Offline paulgali

  • Posts: 89
  • Location: Sandland, UAE
  • It's baul, not Paul.
    • Baul's House
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #92 on: Wed, 24 March 2021, 05:54:10 »
This is pretty nice, now waiting for colors!

Offline zekkin

  • Thread Starter
  • Posts: 481
  • Location: New York
  • my entire life was unlimited zekk works
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #93 on: Wed, 24 March 2021, 07:37:02 »
So some slightly unfortunate news -- the factory informed me last night that the backlog from pre-CNY was too big and not enough machines were available, so despite putting the order in ~3 weeks ago, production has not started on the prototype.

I'll be sure to update re: the prototype when I get more info from the factory.

---

I mentioned this on my stream last night but the results for the PCB portion of the IC are overwhelmingly for including 2 to match the 2 plates, so we'll go with that.

Keep filling in that form! I hope Warm Gray and Evergreen make it!
Daily Driver: TGR-Jane v2 CE
TGR-Alice | TGR-Jane v2 | Rosenthal | Matrix Lab 8xv2.0 | Ogre (PC) | Yves | KFE | hbcp | Vulcan

Offline NotYellow

  • Posts: 1
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #94 on: Thu, 25 March 2021, 06:10:54 »
It looks way to cool to pass up, lets hope the price is good so I won't have too

Offline kimhoon9

  • Posts: 8
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #95 on: Thu, 25 March 2021, 06:58:36 »
I want this


Offline lush_bunny

  • Posts: 547
  • Location: Philippines
  • 1 Custom In Hand, 3 out in the wild
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #96 on: Thu, 25 March 2021, 08:18:19 »
My discord channels told me that stanning Red Velvet is something cool keeb enthusiasts do, so I stan my girl Seulgi  :cool:

Offline jewleeuhn

  • Posts: 19
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #97 on: Fri, 26 March 2021, 13:54:23 »
Evergreen is looking better to me every time I look at this IC. Which is probably every day.

Offline dietonto

  • Posts: 15
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #98 on: Mon, 29 March 2021, 07:14:59 »
A+  :thumb:

Offline Kekkles

  • Posts: 1
  • Location: Las Vegas, NV
Re: [IC] zekk.works RBB - "Seamless"+"Screwless" F13 TKL
« Reply #99 on: Wed, 31 March 2021, 00:50:23 »
I am down bad for this
Keycult No.2 | Rama U-80 | Pc SiNGA | Polaris | Duck Raven | HHKB