Author Topic: [Orders Closed] Phantom PCB R2 (Read 306613 times)

whiskytango · « **Reply #900 on:** Tue, 18 June 2013, 15:25:30 »

Quote from: DamienG on Tue, 18 June 2013, 13:43:19

No shipping notice yet. My phantom is living up to it's name

[)amien

I didn't get a notice. I don't think anyone is getting individual notices. Mine just showed up

Halverson · « **Reply #901 on:** Tue, 18 June 2013, 15:28:43 »

Quote from: whiskytango on Tue, 18 June 2013, 15:25:30

Quote from: DamienG on Tue, 18 June 2013, 13:43:19
No shipping notice yet. My phantom is living up to it's name

[)amien

I didn't get a notice. I don't think anyone is getting individual notices. Mine just showed up

Mine just showed up on my doorstep today, no idea it was coming.

Glod · « **Reply #902 on:** Tue, 18 June 2013, 16:07:37 »

got one of my phantoms up almost everything tested and works so really i have zero complaints except one about this groupbuy or the plate group buy where the issue i don't think was WFD's fault.

my only complaint is tracking would have been nice. I am paranoid as hell about my mail.

thanks bavman, thanks WFD! and thanks to anyone else involved in more minor roles in this round 2, like bpiphany.

nebo · « **Reply #903 on:** Tue, 18 June 2013, 17:00:53 »

WFD, just curious as all these went out if you got all the ones headed to TP yet?

danielucf · « **Reply #904 on:** Tue, 18 June 2013, 18:21:16 »

Is it best to leave the spacers on when soldering the teensy, or should I take them off so they are not sticking out as much? Looking for maximum compatibility with cases in the future so I'm leaning towards removing the spacers before soldering.

bavman · « **Reply #905 on:** Tue, 18 June 2013, 18:28:50 »

I'm sorry about the lack of updates guys but I got real busy real quick.

Basically all but 1 US order is out, but only some internationals. I finally got the rest of the boxes to ship everything else so they should be going out sometime this week.

Quote from: danielucf on Tue, 18 June 2013, 18:21:16

Is it best to leave the spacers on when soldering the teensy, or should I take them off so they are not sticking out as much? Looking for maximum compatibility with cases in the future so I'm leaning towards removing the spacers before soldering.

It's highly recommended you do, but they are a pita to remove, you have to do it slowly or you'll bend/break pins.

Glod · « **Reply #906 on:** Tue, 18 June 2013, 18:41:11 »

Quote from: danielucf on Tue, 18 June 2013, 18:21:16

Is it best to leave the spacers on when soldering the teensy, or should I take them off so they are not sticking out as much? Looking for maximum compatibility with cases in the future so I'm leaning towards removing the spacers before soldering.

its going to have a larger compatibility if you take the spaces off, slap some electrical tape underneath and then solder close to the board, its what WFD suggests and it worked great for me to fit into vortex aluminium case, otherwise it wouldn't fit.

its a ***** to get the spacers off though i cheated and used xacto knife and sliced it up

danielucf · « **Reply #907 on:** Tue, 18 June 2013, 19:13:01 »

Weird, I took one off no problem then put it back on before asking. I will be cautious though, thanks for the information.

gotbadger · « **Reply #908 on:** Sat, 22 June 2013, 14:15:37 »

Quote from: bavman on Tue, 18 June 2013, 18:28:50

Basically all but 1 US order is out, but only some internationals. I finally got the rest of the boxes to ship everything else so they should be going out sometime this week.

Did the internationals ship yet?

inteli722 · « **Reply #909 on:** Sat, 22 June 2013, 14:20:23 »

I'm still waiting on my plate.

madderoftime · « **Reply #910 on:** Mon, 24 June 2013, 22:48:44 »

Does anyone know if there is any GBs or sets of the Phantom PCB and plates are available? Looks awesome but as usual I'm finding it too late.

megaforce · « **Reply #911 on:** Tue, 25 June 2013, 03:09:34 »

Quote from: madderoftime on Mon, 24 June 2013, 22:48:44

Does anyone know if there is any GBs or sets of the Phantom PCB and plates are available? Looks awesome but as usual I'm finding it too late.

You could keep an eye out on the classified.

I highly doubt there will be another GB running anytime soon. Round 2 took place about a year after round 1.

Photekq · « **Reply #912 on:** Tue, 25 June 2013, 23:01:09 »

Any updates on the international orders?

DamienG · « **Reply #913 on:** Fri, 28 June 2013, 19:59:45 »

Haven't seen my domestic yet. Looks like Bavman hasn't been on all week.

gotbadger · « **Reply #914 on:** Sat, 29 June 2013, 11:46:37 »

Common just let us know if its shipped or not is that too much to ask

Poom · « **Reply #915 on:** Mon, 01 July 2013, 07:22:11 »

when will we have round 3?

or is there any left overs? im interested in 1 or 2.

DamienG · « **Reply #916 on:** Tue, 02 July 2013, 10:58:17 »

Still no sign of BavMan. After 5 months of waiting for a Phantom PCB & plate and getting closer and closer I'm now starting to suspect I won't be getting it

[)amien

tgujay · « **Reply #917 on:** Tue, 02 July 2013, 12:37:07 »

Quote from: gotbadger on Sat, 29 June 2013, 11:46:37

Common just let us know if its shipped or not is that too much to ask

Yes.

asura · « **Reply #918 on:** Tue, 02 July 2013, 13:53:34 »

The man hasn't been on since the 24th, so he's not heard most of the requests for updates; as of his last post, he was waiting for appropriate packaging. One can only assume that life (that pesky thing) is getting in the way a bit. It happens. The fact that all but 1 US order has gone out shows that bavman hasn't disappeared into the sunset with our money leaving only promises of updates which either never appear or are cryptic non-updates (too soon?) have faith, be patient, and pull up a stool.

Poom · « **Reply #919 on:** Tue, 02 July 2013, 14:48:58 »

oops... is this another one of those GB gone wrong?

Rendom · « **Reply #920 on:** Tue, 02 July 2013, 15:44:35 »

Quote from: Poom on Tue, 02 July 2013, 14:48:58

oops... is this another one of those GB gone wrong?

Probably just busy. I'd give it another week or 2.

Wildcard · « **Reply #921 on:** Tue, 02 July 2013, 23:16:42 »

I'm wondering if I'm the last US order. My soldering iron is just waiting for now

asura · « **Reply #922 on:** Wed, 03 July 2013, 03:18:05 »

If they went out by alphabetical username then... maybe - sucks for whomever, and us internationals, but they'll get here eventually.

DamienG · « **Reply #923 on:** Wed, 03 July 2013, 09:44:03 »

Quote from: Wildcard on Tue, 02 July 2013, 23:16:42

I'm wondering if I'm the last US order. My soldering iron is just waiting for now

Hmm, I thought I was the last US order based on an PM with BavMan 10 days ago... Anyone else in the USA not get theirs?

[)amien

Batmann · « **Reply #924 on:** Sun, 07 July 2013, 17:00:49 »

I'm waiting for mine too, Bavman is probably busy, he didn't answer my pms,
amyway I hope I get it soon

Photekq · « **Reply #925 on:** Sun, 07 July 2013, 17:02:53 »

I have no doubt that bavman will fulfill our orders. I just wish he'd take a few minutes out of his obviously busy schedule and update us. I thought this PCB would be the first of my parts to arrive.. Now I think it'll be the last :/

litster · « **Reply #926 on:** Sun, 07 July 2013, 17:25:12 »

His profile says he hasn't been on since "Mon, 24 June 2013, 09:38:23."

Photekq · « **Reply #927 on:** Tue, 09 July 2013, 14:15:31 »

Again, I have no doubt that you will fulfill our orders bavman, but I must say this is getting a little ridiculous. You have the PCBs in your hands, please take the time to ship them out or at the very least pay Geekhack a visit to update us on the situation. I have in fact ordered a KMAC PCB since I fear the Phantom won't arrive in time.

DamienG · « **Reply #928 on:** Tue, 09 July 2013, 18:05:31 »

Yeah he has both my PCB and iso plate. These clear switches and retro caps just gathering dust...

[)amien

xSpartanCx · « **Reply #929 on:** Wed, 10 July 2013, 20:55:15 »

Dang, I can't believe I was only a few days late... Anybody know when there will be another GB for phantom sets?

Glod · « **Reply #930 on:** Wed, 10 July 2013, 21:12:34 »

Quote from: xSpartanCx on Wed, 10 July 2013, 20:55:15

Dang, I can't believe I was only a few days late... Anybody know when there will be another GB for phantom sets?

a few days late? orders closed more than half a year ago lol

This was the last group buy for Phantom v1, but it is possible another group buy for a phantom v2 or a Phantom-like TKL Cherry MX keyboard will be happening early to mid next year. Mechanicalkeyboards.com has expressed interest in their forum in having some Phantom v1 PCBs produced if they can acquire all the other parts needed--This would not be a group buy but instead something offered by their store and this could take months to happen.

as for those orders that haven't shipped, bavman obviously isnt a scammer so i hope he is just busy and everything is ok, 2 weeks is an eternity for a group buy organizer to go inactive while having unshipped items.

xSpartanCx · « **Reply #931 on:** Wed, 10 July 2013, 21:29:56 »

Lol sorry, I keep getting mixed up with this forum. I keep thinking it's in order of forum post, not most recent reply. So no more buys for a while? Does that mean I should go out and buy a Majestouch TKL now, instead of waiting to get a phantom first?

Glod · « **Reply #932 on:** Wed, 10 July 2013, 21:45:08 »

i mean that is totally up to you, going to Filco is a decision some make here. something like the phantom you wont see for sale for a while. there are some korean custom programmables out there but nothing exactly like the phantom.

SpAmRaY · « **Reply #933 on:** Wed, 10 July 2013, 22:02:39 »

There have been at least a half dozen PCB kits sold in the last few weeks in the classifieds.

tgujay · « **Reply #934 on:** Thu, 11 July 2013, 10:18:59 »

Quote from: SpAmRaY on Wed, 10 July 2013, 22:02:39

There have been at least a half dozen PCB kits sold in the last few weeks in the classifieds.

Not enough, haha.

Glod · « **Reply #935 on:** Sat, 13 July 2013, 20:16:22 »

Quote from: Glod on Wed, 10 July 2013, 21:12:34

[...]
as for those orders that haven't shipped, bavman obviously isnt a scammer so i hope he is just busy and everything is ok, 2 weeks is an eternity for a group buy organizer to go inactive while having unshipped items.

seriously i hope the dude is ok.

Matt3o · « **Reply #936 on:** Tue, 16 July 2013, 12:21:13 »

I know what it means to organize a group buy, I'm not in a hurry and I don't mind waiting other two months before receiving my order... but this lack of updates is killing me

does anyone know bavman personally? I don't see him online since a few weeks, hope everything is okay... maybe he is just on vacation

Batmann · « **Reply #937 on:** Tue, 16 July 2013, 13:56:47 »

I also hope he's just having some sweet time in Tijuana and that he'll be back safe and sound with a book of stamps in his backpack!

Wildcard · « **Reply #938 on:** Fri, 19 July 2013, 00:36:03 »

Everyone else is building their Phantoms. And I'm just sitting here

SpAmRaY · « **Reply #939 on:** Fri, 19 July 2013, 13:11:05 »

Quote from: Wildcard on Fri, 19 July 2013, 00:36:03

Everyone else is building their Phantoms. And I'm just sitting here

pretty sure spider man doesn't give a....oh wait...

gotbadger · « **Reply #940 on:** Fri, 19 July 2013, 14:02:57 »

Quote from: Wildcard on Fri, 19 July 2013, 00:36:03

Everyone else is building their Phantoms. And I'm just sitting here

Certainly nobody in Europe is. Maybe this GB will be the new Round 4

)

Glod · « **Reply #941 on:** Fri, 19 July 2013, 17:33:49 »

I have genuine concern for bavman and that the delays are part of something going wrong. Almost a month inactive. Only way to clear that up is for him to log in and say he is ok.

Wildcard · « **Reply #942 on:** Sat, 20 July 2013, 23:44:02 »

Quote from: Glod on Fri, 19 July 2013, 17:33:49

I have genuine concern for bavman and that the delays are part of something going wrong. Almost a month inactive. Only way to clear that up is for him to log in and say he is ok.

Oh, please don't say that. I have too much invested in this GB to have those types of issues pop up. I can't handle another Changedrew saga ATM.

duq · « **Reply #943 on:** Mon, 22 July 2013, 10:40:36 »

Has anyone received their non-ansi125' plates?

Sleabo · « **Reply #944 on:** Mon, 22 July 2013, 10:53:51 »

not received anything

Grimey · « **Reply #945 on:** Mon, 22 July 2013, 10:54:53 »

Quote from: duq on Mon, 22 July 2013, 10:40:36

Has anyone received their non-ansi125' plates?

I received a ansi125 with double backspace & double right shift switch positions, not sure if this is what you are asking about though.

duq · « **Reply #946 on:** Mon, 22 July 2013, 11:01:48 »

Quote from: Grimey on Mon, 22 July 2013, 10:54:53

Quote from: duq on Mon, 22 July 2013, 10:40:36
Has anyone received their non-ansi125' plates?

I received a ansi125 with double backspace & double right shift switch positions, not sure if this is what you are asking about though.

Yah, I was wondering if anyone got their "special plates" eg wfd125 pro150 etc etc.

After going through the posts it seems I am just coupled with the other bavman error shipments.

Hope he's ok...

Grimey · « **Reply #947 on:** Mon, 22 July 2013, 13:55:37 »

Just to clarify, but I have seen others with this plate as well that have been completed, so I think your assumption is correct.

Matt3o · « **Reply #948 on:** Tue, 23 July 2013, 03:00:23 »

I'm not allowed to speak, all I can say is: please be patient. Life sometimes beats hard.

WhiteFireDragon · « **Reply #949 on:** Tue, 23 July 2013, 05:02:55 »

Quote from: Matt3o on Tue, 23 July 2013, 03:00:23

I'm not allowed to speak, all I can say is: please be patience. Life sometimes beats hard.

Are you confirming he's just busy and unable to ship at this moment? I surely hope this is the case and bavman is ok, because it's very odd for him to disappear for this long when he was literally in the middle of shipping packages.

News:

Author Topic: [Orders Closed] Phantom PCB R2 (Read 306613 times)