Author Topic: geekhackers.org store testing -- lube kits and PS2 -> USB adapters!  (Read 20503 times)

0 Members and 1 Guest are viewing this topic.

Offline Glissant

  • Trade Count: (0)
  • Posts: 1976
  • Location: Oslo, Norway
Lube me up, sir ;).

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
7 (?) sets left.

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline Tarzan

  • formerly known as Greystoke
  • * Maker
  • Trade Count: (0)
  • Posts: 1304
  • Location: US: Virginia
Just as a data point, I got the USB adapters today - northern Virginia. 

Thanks!

Offline oTurtlez

  • DAT ZACKATTACK
  • Trade Count: (0)
  • Posts: 590
  • Location: Rhode Island
  • Fo' Realforce
HOLD THE PRESSES FOLKS

i've just discovered that IF YOU EAT 3.7 TIMES YOUR BODY MASS IN KRYTOX OIL, YOU HAVE A FIFTY PERCENT CHANCE OF DYING

be careful out there guys.

wow shoot I better be care

request: pic of sifo 50% dying

Did someone request a pic of sifo dying?

TOO BAD FOR YOU

              Phantom 62g MX Whites    

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Trade Count: (0)
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
HOLD THE PRESSES FOLKS

i've just discovered that IF YOU EAT 3.7 TIMES YOUR BODY MASS IN KRYTOX OIL, YOU HAVE A FIFTY PERCENT CHANCE OF DYING

be careful out there guys.

wow shoot I better be care

request: pic of sifo 50% dying

Did someone request a pic of sifo dying?

Show Image


or sifo dyeing

31719-0

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Trade Count: (0)
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
HOLD THE PRESSES FOLKS

i've just discovered that IF YOU EAT 3.7 TIMES YOUR BODY MASS IN KRYTOX OIL, YOU HAVE A FIFTY PERCENT CHANCE OF DYING

be careful out there guys.

wow shoot I better be care

request: pic of sifo 50% dying

Did someone request a pic of sifo dying?

Show Image


or sifo dyeing

(Attachment Link)

Epic LMAO!

Offline Xenderwind

  • Trade Count: (0)
  • Posts: 585
  • Location: chesapeake, virginia
Got my lube kit today.  Everything arrived safely, at least I think.  I have not fully unwrapped the lube yet since I saw small amounts of lube on the wrapping at I got further down (and I don't have any gloves).  But I'm going to attest that to either a really really small leak, or the fact that you probably have lube everywhere in your house.  The syringe is safe as well.  I can take pics if needed, but trying to eat atm :D.
GON NS 87 62g clears, QFR 62g clears, Pure 65g blues, HHKB Pro II

Offline codyeatworld

  • * Destiny Supporter
  • Trade Count: (0)
  • Posts: 944
  • Location: Bay Area, California
Got mine today, a little bit leaked out and got on the wrapping and the skinny bottles. but not a lot from what I can tell.

Its not a  big deal, just thought you should know.

Thanks a lot mkawa.




Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
HOLD THE PRESSES FOLKS

i've just discovered that IF YOU EAT 3.7 TIMES YOUR BODY MASS IN KRYTOX OIL, YOU HAVE A FIFTY PERCENT CHANCE OF DYING

be careful out there guys.

wow shoot I better be care

request: pic of sifo 50% dying

Did someone request a pic of sifo dying?

Show Image


or sifo dyeing

(Attachment Link)

YYEESSSSSssssssssss.......

umm, yes, the vials are slippery because i literally have krytox everywhere in my apartment, and myself. basically 24/7. if it's not clear that a significantly amount got out of the vial (the oil vial would be like half empty most likely), it was probably either a slight pressure issue or just the grease that was on all the grease vials migrating with heat cycles in hot trucks. i have one report of a straight up smashed oil vial, but that was with those damned 3x4 envelopes that i won't be using ever again. for anything.

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Trade Count: (0)
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Mwaka what is the procedure for washing this stuff off?

Offline Xenderwind

  • Trade Count: (0)
  • Posts: 585
  • Location: chesapeake, virginia
Mwaka what is the procedure for washing this stuff off?

There was actually a part of the note that was included that states:
There are exactly seven solvents that dissolve krytox products and:  six of them cause cancer, and the last one is the chemical equivalent of an anti-krytox, except it costs three times as much and is nearly impossible to purchase.  Also, it may cause cancer.  You have been warned.
GON NS 87 62g clears, QFR 62g clears, Pure 65g blues, HHKB Pro II

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
i buy the big packs of microfiber cloths from costco and wipe everything down. when a towel is saturated with krytox, i rinse it out and dry. after enough cycles of this, the towels become pretty useless and have to be tossed.. the costco microfibers are about 0.4USD each, so it ends up working out. all future shipments will come with at least one pair of disposable gloves (the note actually states that every pack comes with a pair of gloves, but i doofed and forgot the gloves for the first 10 shipments or so.

there are 5 or 6 beta kits left. after this, prices go up, so if you want krytox in the US, now is a pretty good time. more niceties will come in later packs, but they will have to cost more.

there will be super cute heart stickers though. hat tip to jocelyn for that one.

note that the problem with trying to dissolve krytox polymers is that you release flourine. flourine unbonded is an extremely nasty, corrosive substance. hence, badness. the least toxic solvent for krytox is actually another PFPE that is designed to attract the PFPE base in krytox products and bond to them, and then there's some chemical magic that I don't understand. However, even this product has a max exposure of 750 PPM; ie, it is toxic.

krytox itself is completely, wildly non-toxic. so the best cleanup procedure is probably some rags and time. yes, eventually everything you own will have a trace amount of krytox on it, but i've been living in trace amounts of krytox all week/end and it's not so bad -- everything is just slightly less frictiony. also, it's odorless and tasteless. so basically, i'm unable to tell via the usual methods that there is krytox everywhere. i just know because there has to be.

one should also note that the reason i have krytox everywhere is because i did a horrible job trying to pack the beta kits and i have 20-30lbs of it in my living room. the few grams in each kit won't get nearly as far, frankly.
« Last Edit: Wed, 14 August 2013, 20:01:57 by mkawa »

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Trade Count: (0)
  • Posts: 11542
  • Location: WI
i have 20-30lbs of it in my living room.

You could kill a tiny baby with that.  If you force fed it to them.

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Trade Count: (0)
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
i buy the big packs of microfiber cloths from costco and wipe everything down. when a towel is saturated with krytox, i rinse it out and dry. after enough cycles of this, the towels become pretty useless and have to be tossed.. the costco microfibers are about 0.4USD each, so it ends up working out. all future shipments will come with at least one pair of disposable gloves (the note actually states that every pack comes with a pair of gloves, but i doofed and forgot the gloves for the first 10 shipments or so.

there are 5 or 6 beta kits left. after this, prices go up, so if you want krytox in the US, now is a pretty good time. more niceties will come in later packs, but they will have to cost more.

there will be super cute heart stickers though. hat tip to jocelyn for that one.

note that the problem with trying to dissolve krytox polymers is that you release flourine. flourine unbonded is an extremely nasty, corrosive substance. hence, badness. the least toxic solvent for krytox is actually another PFPE that is designed to attract the PFPE base in krytox products and bond to them, and then there's some chemical magic that I don't understand. However, even this product has a max exposure of 750 PPM; ie, it is toxic.

krytox itself is completely, wildly non-toxic. so the best cleanup procedure is probably some rags and time. yes, eventually everything you own will have a trace amount of krytox on it, but i've been living in trace amounts of krytox all week/end and it's not so bad -- everything is just slightly less frictiony. also, it's odorless and tasteless. so basically, i'm unable to tell via the usual methods that there is krytox everywhere. i just know because there has to be.

one should also note that the reason i have krytox everywhere is because i did a horrible job trying to pack the beta kits and i have 20-30lbs of it in my living room. the few grams in each kit won't get nearly as far, frankly.

So basically don't use krytox to moisturize the cat.

Unless they are stuck somewhere, then it might come in handy.
« Last Edit: Wed, 14 August 2013, 21:12:53 by SpAmRaY »

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
cats are already pretty slippery little critters. i really don't think they need it.

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline korrelate

  • Trade Count: (2)
  • Posts: 407
  • Location: Virginia
  • iubeo stultum esse libenter
PMed!

Topre REALFORCE

Offline actionbastard

  • Trade Count: (0)
  • Posts: 59
  • Location: California
Got mine today, mine was pretty much same as Cody's. vial's were closed but a little oily.

Didn't get around to messing with the lube today though, my ErgoDox also came in and I spent literally 6 or 7 hours putting it together. But it's done, and works. :thumb:

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
awesome!

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Trade Count: (0)
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
I've wished more times than I can remember that I was in the US this week.

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Trade Count: (0)
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
I've wished more times than I can remember that I was in the US this week.

But then you couldn't do all the awesome stickers, acrylic keys, etc!!! ;)

Offline boost

  • BOSTMOBILE
  • * Elevated Elder
  • Trade Count: (0)
  • Posts: 3300
  • NY Giants!!!
Got my kits in!!!!

anyone wanna "test" the lube by lubing 500 switches for me ;)
"Aerodynamics are for people who can't build engines."

-Enzo Ferrari

Offline Xenderwind

  • Trade Count: (0)
  • Posts: 585
  • Location: chesapeake, virginia
Got my kits in!!!!

anyone wanna "test" the lube by lubing 500 switches for me ;)

I'm still debating if I want to relube mine.  I just used the cheap teflon stuff last time but that was only a couple weeks ago.  I'd hate to have to desolder all the switches and open them again, but at least I have a switch tool this time.
GON NS 87 62g clears, QFR 62g clears, Pure 65g blues, HHKB Pro II

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Trade Count: (0)
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Got my kits in!!!!

anyone wanna "test" the lube by lubing 500 switches for me ;)
Send it my way! :P


I've wished more times than I can remember that I was in the US this week.

But then you couldn't do all the awesome stickers, acrylic keys, etc!!! ;)
I know, I had this discussion int he PM with HoffmanMyster, and said what I said earlier and in the same line, what you mentioned.

Offline SpAmRaY

  • NOT a Moderator
  • * Certified Spammer
  • Trade Count: (0)
  • Posts: 14667
  • Location: ¯\(°_o)/¯
  • because reasons.......
Got my kits in!!!!

anyone wanna "test" the lube by lubing 500 switches for me ;)

all at once :o

just put all the switches in a BIG zip lock bag then dump in lube and shake...

Offline HoffmanMyster

  • HOFF, smol MAN OF MYSTERY
  • * Senior Moderator
  • Trade Count: (0)
  • Posts: 11542
  • Location: WI
I've wished more times than I can remember that I was in the US this week.

But then you couldn't do all the awesome stickers, acrylic keys, etc!!! ;)
I know, I had this discussion int he PM with HoffmanMyster, and said what I said earlier and in the same line, what you mentioned.

You'll just have to come visit around the time of KeyCon 2014!  :D

On topic: can't wait to receive my kit!  Should get it by this weekend when I go home.

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
4 kits left. last chance to get yours shipped before i leave for keycon

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline Dubsgalore

  • Banned
  • Trade Count: (0)
  • Posts: 2849
  • Location: 75% You have received a warning for attempting to circumvent the classifieds rules
    • Dubs - Sneakers, Keyboards, and Life
lubed recieved
thanks dood
accidentally touched the plastic wrapping around the bottles, and now my keycaps are greasy x_x

Offline Glissant

  • Trade Count: (0)
  • Posts: 1976
  • Location: Oslo, Norway
All the lube showed up intact with scary latex gloves that made me think I was dealing with death in tiny syringes.
Love the instructions too. Maybe just give a link to an online document with that information in the invoice or receipt to save paper?

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
1) they're nitrile gloves, so safe if you have a latex allergy!

2) at some point the geekhackers storefront will have all this documentation. this was something i wrote up in the rush to get the beta kits out. i wanted to personally thank everyone who was willing to try out my first effort at this personally, and that's why you always leave a note.

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline Glissant

  • Trade Count: (0)
  • Posts: 1976
  • Location: Oslo, Norway
Exceptionally serious reply to a warm and joking post. I'll go back to not posting now :).

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
IT WAS ALL JUST EXCUSE FOR THE ARRESTED DEVELOPMENT REFERENCE

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline domoaligato

  • * Exquisite Elder
  • Trade Count: (0)
  • Posts: 1672
  • Location: USA
  • All your base are belong to us!
    • All your base are belong to us!
If I was to say... spill some of this. what is the best way to clean it up? dawn dish soap? isopropyl alcohol?

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
disposable microfiber cloth

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline domoaligato

  • * Exquisite Elder
  • Trade Count: (0)
  • Posts: 1672
  • Location: USA
  • All your base are belong to us!
    • All your base are belong to us!
Mwaka what is the procedure for washing this stuff off?

There was actually a part of the note that was included that states:
There are exactly seven solvents that dissolve krytox products and:  six of them cause cancer, and the last one is the chemical equivalent of an anti-krytox, except it costs three times as much and is nearly impossible to purchase.  Also, it may cause cancer.  You have been warned.

nevermind I see this now. it sounds like trolling though. :(

edit: wow.... this stuff is crazy. lol must get some.
« Last Edit: Sun, 18 August 2013, 20:23:32 by domoaligato »

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
... and i think we're all out of beta kits now! thanks for your orders everyone!! :)

on wednesday i will retrieve the last of the parts for the pre-RTM kits (i think there's one more thing i want to include in the final final-ish kits -- a larger diameter needle for suction-filling with the plunger... but i'm still trying to decide if it will actually help or just drive up the cost of the kits for no good reason. 5ccs just doesn't give you that much vacuum unfortunately..).

matt3o has been hard at work on the storefront and i'm hoping at least a beta version will go up by next week so that kits can be ordered properly. i also have dyesubbed spacebars from imsto coming in at some point that i know a number of you have been waiting patiently for, and something something i can't remember).

ok anyway, if you've contacted me with an order in the last couple days, i will get back to you by wednesday pacific time at the latest.

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline JPG

  • Trade Count: (0)
  • Posts: 1124
  • Location: Canada (Beloeil, near Montreal)
  • Model F is my new passion!
I got my lube today. Seems okay, a little oil evaporated, but it's very few. The package did it's job!

Thx Kawa  :thumb:
IBM F122, IBM XT F X2, IBM AT F (all Soarer converted), Filco Camo TKL Browns

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
yes! through canuck customs!

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
oh by the way, nothing evaporated. i left a little room in each vial because the density of the oil and grease lower slightly when heated (by quite a bit, but you never know with mail)

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline korrelate

  • Trade Count: (2)
  • Posts: 407
  • Location: Virginia
  • iubeo stultum esse libenter
Received my beta package yesterday. Very timely shipping. Thanks mkawa!!

Topre REALFORCE

Offline Sifo

  • Alter
  • * Exquisite Elder
  • Trade Count: (1)
  • Posts: 7505
  • Location: #GOLDSPRINGS, #LEGITBALLIN
  • Illustrious
Got my ****, but u already know it Gucci
I love Elzy

Offline thadood

  • Trade Count: (0)
  • Posts: 64
  • Location: Memphis, TN
Glad I was able to place a finish line order!

Offline n0rvig

  • Trade Count: (0)
  • Posts: 355
Got my shipment yesterday. It probably arrived earlier but I only just checked the mailbox.

Love the instructions. My muscles are tired because I'm a geek.

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Trade Count: (0)
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Mine arrived today - thanks!

Only 12 days - that might be a record.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
yes!

i have 16 pre-RTM kits packed. these are the same as the beta kits with a few exceptions: ALL of them contain gloves. i have included a swizzle stick for mixing and moving around the grease (beta+ kits also have this). finally, the grease vials have a much wider mouth which makes them quite a bit easier to work with. Price on these is 16$ USD. Same shipping restrictions as before. I will not ship into china or SE asia, as they still come with hypodermic needles, and i don't want anyone to get put in jail (yeeps!)

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline mkawa

  •  No Marketplace Access
  • Trade Count: (0)
  • Thread Starter
  • Posts: 6562
  • (ツ)@@@. crankypants
rowdy didn't order any lube by the way. still need to test lube packs into australia. anyone in australia need krytox? :D

to all the brilliant friends who have left us, and all the students who climb on their shoulders.

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Trade Count: (0)
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
rowdy in australia
rowdy gets krytox lube
rowdy didn't order krytox lube
need to test shipping to australia

Now I am confused.

I really want to get some lube, however I am a MX Blue fan and lube will dampen the feel I love. What to do. First world problems.  :-\

Offline rowdy

  • HHKB Hapster
  • * Erudite Elder
  • Trade Count: (0)
  • Posts: 21175
  • Location: melbourne.vic.au
  • Missed another sale.
Rowdy received three PS/2 to USB adaptors, and in the spirit of transparency, Rowdy did not receive any latex gloves, although there was a nice instruction leaflet included that said something about wearing the gloves while using the rest of the package.  Rowdy was a bit worried to plug a PS/2 keyboard in without the gloves.
"Because keyboards are accessories to PC makers, they focus on minimizing the manufacturing costs. But that’s incorrect. It’s in HHKB’s slogan, but when America’s cowboys were in the middle of a trip and their horse died, they would leave the horse there. But even if they were in the middle of a desert, they would take their saddle with them. The horse was a consumable good, but the saddle was an interface that their bodies had gotten used to. In the same vein, PCs are consumable goods, while keyboards are important interfaces." - Eiiti Wada

NEC APC-H4100E | Ducky DK9008 Shine MX blue LED red | Ducky DK9008 Shine MX blue LED green | Link 900243-08 | CM QFR MX black | KeyCool 87 white MX reds | HHKB 2 Pro | Model M 02-Mar-1993 | Model M 29-Nov-1995 | CM Trigger (broken) | CM QFS MX green | Ducky DK9087 Shine 3 TKL Yellow Edition MX black | Lexmark SSK 21-Apr-1994 | IBM SSK 13-Oct-1987 | CODE TKL MX clear | Model M 122 01-Jun-1988

Ị̸͚̯̲́ͤ̃͑̇̑ͯ̊̂͟ͅs̞͚̩͉̝̪̲͗͊ͪ̽̚̚ ̭̦͖͕̑́͌ͬͩ͟t̷̻͔̙̑͟h̹̠̼͋ͤ͋i̤̜̣̦̱̫͈͔̞ͭ͑ͥ̌̔s̬͔͎̍̈ͥͫ̐̾ͣ̔̇͘ͅ ̩̘̼͆̐̕e̞̰͓̲̺̎͐̏ͬ̓̅̾͠͝ͅv̶̰͕̱̞̥̍ͣ̄̕e͕͙͖̬̜͓͎̤̊ͭ͐͝ṇ̰͎̱̤̟̭ͫ͌̌͢͠ͅ ̳̥̦ͮ̐ͤ̎̊ͣ͡͡n̤̜̙̺̪̒͜e̶̻̦̿ͮ̂̀c̝̘̝͖̠̖͐ͨͪ̈̐͌ͩ̀e̷̥͇̋ͦs̢̡̤ͤͤͯ͜s͈̠̉̑͘a̱͕̗͖̳̥̺ͬͦͧ͆̌̑͡r̶̟̖̈͘ỷ̮̦̩͙͔ͫ̾ͬ̔ͬͮ̌?̵̘͇͔͙ͥͪ͞ͅ

Offline affect656

  • Trade Count: (0)
  • Posts: 51
  • Location: West Texas
Picked it up yesterday but I think it got there like a week earlier. Package was fine
I like linear.

Offline MOZ

  • KING OF THE NEWBIES
  • * Maker
  • Trade Count: (0)
  • Posts: 3981
  • Location: Jo'burg
  • Busy making stuff
Finely sense creeping back to the thread.