i can ask, but we're probably just going to have to produce our own stickers to put on them. they're not set up for OEM production.
one thing i did learn is how to test your soldapullt for good function
1) cock the plunger
2) block the intake (bottom) nozzle with your finger TIGHTLY
3) hit the plunger release button without unblocking the nozzle.
the soldapullt should completely hold vacuum for about 1-2 seconds and then slowly release. i suspect we can improve this actually by lubing the o-rings with krytox VPF. (that is, improve the vacuum holding time).
you can tell whether your piston is holding vacuum by watching the steel rod that lives inside the plunger spring. that should not move from full engaged for 1-2s and then it should slowly rise.
if your soldapullt cannot hold vacuum for 1-2s, then you need a rebuilt kit. they are simple to install and cheap and if i stock the soldapullts, i will also stock the rebuild kits.
another plus is that IF there's enough demand, i should be able to beat edsyn's pricing with no minimum order price and significantly cheaper international shipping (since they only ship UPS). further, you'll be able to combine your soldapullt order with krytox, usb multimode adapters and anything else i end up stocking.
PLEASE speak up if you would be interested in this, especially if you're international, as that's a big market that edsyn itself is having trouble breaking into because of their small size and how prolific the crappy fakes are.