Have you read the geekhack TOS lately?
0 Members and 2 Guests are viewing this topic.
Show ImagePURDY
Quote from: elton5354 on Wed, 30 December 2015, 22:36:22Quote from: alienman82 on Wed, 30 December 2015, 22:34:57I wish my diodes could here faster Sorry If i had known we need them beforehand, you wouldn't had to wait now.We need diodes? ? ?
Quote from: alienman82 on Wed, 30 December 2015, 22:34:57I wish my diodes could here faster Sorry If i had known we need them beforehand, you wouldn't had to wait now.
I wish my diodes could here faster
Quote from: R1N3 on Wed, 30 December 2015, 23:25:11Quote from: elton5354 on Wed, 30 December 2015, 22:36:22Quote from: alienman82 on Wed, 30 December 2015, 22:34:57I wish my diodes could here faster Sorry If i had known we need them beforehand, you wouldn't had to wait now.We need diodes? ? ?Only for alps
Quote from: appleonama on Wed, 30 December 2015, 23:00:14Show ImagePURDYDamn beautiful! I wish I was able to get my hands on the flat acrylic bottom, I'm sure a lot of people weren't expecting it to look this good. :thumb:
There needs to be pictures in here, since I haven't shared in awhile:Show ImageOrion v2 with Zealios by Steve N, on FlickrShow ImageOrion v2 w/OTD Red Alert by Steve N, on Flickr
Anyone have a guide on the keyboard software. I am having trouble getting this thing to work. I was able to get it working on the duck eagle a couple months ago but now I can't get it to work.
Quote from: appleonama on Fri, 01 January 2016, 16:40:10Anyone have a guide on the keyboard software. I am having trouble getting this thing to work. I was able to get it working on the duck eagle a couple months ago but now I can't get it to work.I had a viper and got everything to work if you wanna pm me I'll try to help
Quote from: appleonama on Fri, 01 January 2016, 16:40:10Anyone have a guide on the keyboard software. I am having trouble getting this thing to work. I was able to get it working on the duck eagle a couple months ago but now I can't get it to work.Other than Duck's page listing all the functionalities I don't think there is a guide. http://duck0113.tistory.com/124I'm also more than willing to help out if you want to shoot me a PM, I got mine working rather quickly and like to think that I got the hang of the software by now.
Quote from: Steezus on Fri, 01 January 2016, 16:48:44Quote from: appleonama on Fri, 01 January 2016, 16:40:10Anyone have a guide on the keyboard software. I am having trouble getting this thing to work. I was able to get it working on the duck eagle a couple months ago but now I can't get it to work.Other than Duck's page listing all the functionalities I don't think there is a guide. http://duck0113.tistory.com/124I'm also more than willing to help out if you want to shoot me a PM, I got mine working rather quickly and like to think that I got the hang of the software by now.just found http://www.adamfalwell.com/projects/octagon/assets/-simplified-guide--duck-pcb-flash-firmware---keymapping.docxill try to see if I can get it going
Quote from: appleonama on Fri, 01 January 2016, 17:09:41Quote from: Steezus on Fri, 01 January 2016, 16:48:44Quote from: appleonama on Fri, 01 January 2016, 16:40:10Anyone have a guide on the keyboard software. I am having trouble getting this thing to work. I was able to get it working on the duck eagle a couple months ago but now I can't get it to work.Other than Duck's page listing all the functionalities I don't think there is a guide. http://duck0113.tistory.com/124I'm also more than willing to help out if you want to shoot me a PM, I got mine working rather quickly and like to think that I got the hang of the software by now.just found http://www.adamfalwell.com/projects/octagon/assets/-simplified-guide--duck-pcb-flash-firmware---keymapping.docxill try to see if I can get it goingAwesome, I actually didn't know that exists. One thing I forgot that may help, when I was having trouble getting the hex files to save. If you make a txt file first with the same name then it allows you save the hex file over it. I don't know if everybody was experiencing this problem but it occurred for me.
In the octagon thread, there is a workaround with using microsoft app locale. Doesnt work with Windows 10 tho.
DONE! Man this took me forever to finish. I was doing everything in fine detail. I am having an issue with my print screen button going off hundreds of times in seconds any ideas? The LED's were going to be temporary because I didn't have enough of cyan but I really love how the colors mix. Also the TA set looked ugly at first but now it is love at first sight on the orion Show Image
Mine finally surfaced at the customs today (9 days later).Just to make sure - it was posted from an individual, right? Not a business?Asking because individual == i can use the paypal/bank statement as proof of purchase; whereas for a business PoP == invoice.
Quote from: orcinus on Sat, 02 January 2016, 11:21:46Mine finally surfaced at the customs today (9 days later).Just to make sure - it was posted from an individual, right? Not a business?Asking because individual == i can use the paypal/bank statement as proof of purchase; whereas for a business PoP == invoice.from memory pretty such it was a person
No says mycnc coShow Image
well after a couple hours of using lubed gateron blacks I regret them. I think I just prefer tactile switches.I think I over lubed my switches which made them feel buttery. Anyways I am going to desolder and replace them with 65g zealios
Quote from: appleonama on Sat, 02 January 2016, 20:13:26well after a couple hours of using lubed gateron blacks I regret them. I think I just prefer tactile switches.I think I over lubed my switches which made them feel buttery. Anyways I am going to desolder and replace them with 65g zealios Which plate do you have?
Quote from: appleonama on Sat, 02 January 2016, 20:13:26well after a couple hours of using lubed gateron blacks I regret them. I think I just prefer tactile switches.I think I over lubed my switches which made them feel buttery. Anyways I am going to desolder and replace them with 65g zealios Nothing is worse than soldering up a whole board and then not liking the switches. I can definitely vouch for the 65g Tactile Zealios though, I have those in my Orion and love them, I do however have a plastic plate but that muffles the sound and gives a little more tactility. Best of luck and take your time, don't want to ruin a good PCB.
Quote from: Steezus on Sat, 02 January 2016, 20:34:17Quote from: appleonama on Sat, 02 January 2016, 20:13:26well after a couple hours of using lubed gateron blacks I regret them. I think I just prefer tactile switches.I think I over lubed my switches which made them feel buttery. Anyways I am going to desolder and replace them with 65g zealios Nothing is worse than soldering up a whole board and then not liking the switches. I can definitely vouch for the 65g Tactile Zealios though, I have those in my Orion and love them, I do however have a plastic plate but that muffles the sound and gives a little more tactility. Best of luck and take your time, don't want to ruin a good PCB. yeah I am definitely being very careful with my pcb but dam this solder sucker makes my life much easier.
Quote from: appleonama on Sat, 02 January 2016, 20:45:33Quote from: Steezus on Sat, 02 January 2016, 20:34:17Quote from: appleonama on Sat, 02 January 2016, 20:13:26well after a couple hours of using lubed gateron blacks I regret them. I think I just prefer tactile switches.I think I over lubed my switches which made them feel buttery. Anyways I am going to desolder and replace them with 65g zealios Nothing is worse than soldering up a whole board and then not liking the switches. I can definitely vouch for the 65g Tactile Zealios though, I have those in my Orion and love them, I do however have a plastic plate but that muffles the sound and gives a little more tactility. Best of luck and take your time, don't want to ruin a good PCB. yeah I am definitely being very careful with my pcb but dam this solder sucker makes my life much easier.Yeah mine has treated me quite well. I had to de-solder both Pok3rs since the LED holes came pre-filled, and then after finishing soldering up one board I saw that Vortex posted that you need to put the LEDs in the opposite polarity of what the PCB says...
Quote from: Steezus on Sat, 02 January 2016, 20:48:11Quote from: appleonama on Sat, 02 January 2016, 20:45:33Quote from: Steezus on Sat, 02 January 2016, 20:34:17Quote from: appleonama on Sat, 02 January 2016, 20:13:26well after a couple hours of using lubed gateron blacks I regret them. I think I just prefer tactile switches.I think I over lubed my switches which made them feel buttery. Anyways I am going to desolder and replace them with 65g zealios Nothing is worse than soldering up a whole board and then not liking the switches. I can definitely vouch for the 65g Tactile Zealios though, I have those in my Orion and love them, I do however have a plastic plate but that muffles the sound and gives a little more tactility. Best of luck and take your time, don't want to ruin a good PCB. yeah I am definitely being very careful with my pcb but dam this solder sucker makes my life much easier.Yeah mine has treated me quite well. I had to de-solder both Pok3rs since the LED holes came pre-filled, and then after finishing soldering up one board I saw that Vortex posted that you need to put the LEDs in the opposite polarity of what the PCB says...oh man that sucks... The only issue I am having is getting the solder out of the tiny led holes. The solder becomes solid way too quick.
Show ImageShow Image
Quote from: alienman82 on Sun, 03 January 2016, 01:13:13Show ImageShow Imagepretty. so the bottom half is acrylic?
Quote from: alienman82 on Sun, 03 January 2016, 01:13:13Show ImageShow ImageThat looks awesome! As someone who hasn't used alps but is alps-curious I'm kicking myself for not getting the alps add on
Quote from: naasfu on Sun, 03 January 2016, 01:17:32Quote from: alienman82 on Sun, 03 January 2016, 01:13:13Show ImageShow Imagepretty. so the bottom half is acrylic?Thanks! Yes bottom is acrylic. The blue alps in this baby have me quite the trouble had to repair a good 15 of them. Much headache. Actually ripped a trace by accident. And soldered 84 smd diodes. Worked a lot today but I am happy it all turned out ok. Definitely never doing alps again. **** em. Cherry all the way
will there be the V3 next?
Quote from: alienman82 on Sun, 03 January 2016, 01:19:32Quote from: naasfu on Sun, 03 January 2016, 01:17:32Quote from: alienman82 on Sun, 03 January 2016, 01:13:13Show ImageShow Imagepretty. so the bottom half is acrylic?Thanks! Yes bottom is acrylic. The blue alps in this baby have me quite the trouble had to repair a good 15 of them. Much headache. Actually ripped a trace by accident. And soldered 84 smd diodes. Worked a lot today but I am happy it all turned out ok. Definitely never doing alps again. **** em. Cherry all the wayThat board is pure excellence great work, i wish i was paying attention when this GB was open and joined. What was wrong with the blue alps that required them to be repaired?
If anyone has a black or blue top case extra, that they'd be willing to part with, let me know.Wouldn't mind having another color option stashed.Yeah, yeah, i know, should've thought of that when i was ordering...Hindsight 20/20.
I'm pretty sure the only way to get the top case is by having the buy the kit itself, the bottoms is what were the options.
Am i the only person annoyed by the PWM flicker of the backlight LEDs (keyswitch LEDs, not the back-*side* LEDs)?Haven't noticed it mentioned by anyone. It's pretty nasty, i'd say 60 Hz or so?