Author Topic: [GB] TGR-910 CE - 100% Completed.  (Read 91375 times)

0 Members and 1 Guest are viewing this topic.

Offline kmba

  • Formerly tameone
  • * Esteemed Elder
  • Posts: 1163
  • Location: Indiana, USA
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #850 on: Wed, 20 June 2018, 06:47:28 »
Mine hasnít even shipped as of today. I sent yuktsi a PM a few days ago, but havenít heard back from him. Maybe heís still having finals, I donít know. But Iíd like to get mine soon or at least get a statement when heís going to ship it.

Same. A week or so ago he told me there were a few left to ship but I have no idea when they'll go out.
keyboards.

Offline LDobler

  • Posts: 264
  • Location: Austria
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #851 on: Wed, 20 June 2018, 06:51:22 »
Just got my alu 910 yesterday!
I think Sam is very busy at the moment, that's why it takes him a while to reply.

Cheers ☺

Offline Velvet_Crowe

  • Posts: 37
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #852 on: Mon, 25 June 2018, 21:52:54 »
I want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?

Offline Puddsy

  • nice
  • * Exalted Elder
  • Posts: 9528
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #853 on: Tue, 26 June 2018, 00:13:39 »
I want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?

as in RGB LEDs on the bottom or in-switch?
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE "2Y10M" | TGR Alice "Pink + White" | MEME "Sound Meme" | Keycult No 1 "The Brass Behemoth" | Southpaw Fullsize (when it ships) | Daily driver: TGR Alice

I like what this guy said

Offline Velvet_Crowe

  • Posts: 37
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #854 on: Tue, 26 June 2018, 08:45:30 »
I want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?

as in RGB LEDs on the bottom or in-switch?
RGB LEDs on the bottom and also for the logo

I'm just not sure if the attiny85 has to be flashed with a firmware that is specifically for the tgr 910

Offline yuktsi

  • * Maker
  • Thread Starter
  • Posts: 1105
  • Location: Muddy Confluence
  • Colour my life with the chaos of trouble
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #855 on: Tue, 26 June 2018, 10:02:04 »
I want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?

as in RGB LEDs on the bottom or in-switch?
RGB LEDs on the bottom and also for the logo

I'm just not sure if the attiny85 has to be flashed with a firmware that is specifically for the tgr 910
Attiny85 from any ps2avrGB PCB should work with the 910
More
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 103 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1

Offline Sissy

  • Posts: 397
  • Location: Australia
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #856 on: Tue, 26 June 2018, 23:28:50 »
sent you a pm on slack yuktsi.

Offline dgneo

  • Supervillain
  • Posts: 1957
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #857 on: Wed, 27 June 2018, 06:55:22 »




Arrived safe and sound :)
null

Offline theillumedpanda

  • Posts: 251
  • Don't point that gun at me - I'm an unpaid intern!
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #858 on: Wed, 27 June 2018, 08:41:40 »
Show Image


Show Image


Arrived safe and sound :)
That looks very cool. Patiently wating for mine.

Offline Artemisia254

  • Posts: 6
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #859 on: Wed, 27 June 2018, 13:50:47 »
I want to add SMD leds to my tgr 910 pcb. How do I go about doing this? Can I just salvage an ATTiny85 controller from another board and solder that in?

as in RGB LEDs on the bottom or in-switch?
RGB LEDs on the bottom and also for the logo

I'm just not sure if the attiny85 has to be flashed with a firmware that is specifically for the tgr 910
Attiny85 from any ps2avrGB PCB should work with the 910
can you update some news about the PC version :) ?

Offline Velvet_Crowe

  • Posts: 37
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #860 on: Thu, 28 June 2018, 00:55:03 »
anyone know how/where i can get a polycarb plate made for this

Online dallman5

  • Formerly UberDrk
  • Posts: 116
  • Location: Maryland, USA
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #861 on: Thu, 28 June 2018, 01:11:30 »
anyone know how/where i can get a polycarb plate made for this

Iíd also be interested.

I messaged yuktsi about this a while back because I saw a PC plate in a picture with the rest of the PC boards, but he told me is that he only prototyped a few.
More
HHKB Pro 1 (KB300BN) | GSKT-00 | TGR 910 SE | TGR 910 RE | OTD Koala | TGR Jane v2 | LZ-GH v2 | LZ-MP | Realforce 86U | Realforce R2 PFU Edition | IBM Model M SSK (APL) | TGR Alice | TGR Tris | IBM 3279 (APL)

Offline Jkush463

  • Posts: 269
  • Location: Aurora, IL
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #862 on: Fri, 29 June 2018, 14:16:57 »
Some one sell me one of these lol

Online romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8380
  • Location: The Windy City
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #863 on: Fri, 29 June 2018, 14:18:29 »
Some one sell me one of these lol

Make a classifieds for one.


Online futurecrime

  • Posts: 584
  • Location: London, England
  • Probably tired right now.
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #865 on: Mon, 02 July 2018, 07:10:33 »
x-post so sorry.






Offline Puddsy

  • nice
  • * Exalted Elder
  • Posts: 9528
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #866 on: Wed, 04 July 2018, 11:03:15 »
x-post so sorry.

Show Image


Show Image


Show Image


nice
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE "2Y10M" | TGR Alice "Pink + White" | MEME "Sound Meme" | Keycult No 1 "The Brass Behemoth" | Southpaw Fullsize (when it ships) | Daily driver: TGR Alice

I like what this guy said

Online PurpleURP

  • Posts: 41
  • Location: Texas
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #867 on: Wed, 04 July 2018, 15:31:12 »
Is there going to be another round?

Offline Puddsy

  • nice
  • * Exalted Elder
  • Posts: 9528
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #868 on: Wed, 04 July 2018, 16:02:20 »
Is there going to be another round?

he has said no

look out for typemachina
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE "2Y10M" | TGR Alice "Pink + White" | MEME "Sound Meme" | Keycult No 1 "The Brass Behemoth" | Southpaw Fullsize (when it ships) | Daily driver: TGR Alice

I like what this guy said

Offline heckenjoni

  • Posts: 39
  • Location: Germany
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #869 on: Fri, 06 July 2018, 07:14:57 »
hey yuktsi did send you a pm on discord and an email

Offline dgneo

  • Supervillain
  • Posts: 1957
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #870 on: Fri, 06 July 2018, 07:17:58 »


- Brass Plate
- Vintage MX Blacks, Cleaned/Lubed/Polycarb Film
- Clipped/Lubed/Bandaid Stabs
- IMSTO Irish Keyset








null

Offline hippiepete

  • Posts: 89
  • Location: Brazil
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #871 on: Sat, 07 July 2018, 17:49:19 »
damn dg thats lookin fineeeeee

Offline theillumedpanda

  • Posts: 251
  • Don't point that gun at me - I'm an unpaid intern!
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #872 on: Thu, 19 July 2018, 17:44:47 »
Which carrier did yuktsi use for your PC 910? While I have a tracking number, AfterShip recognizes it as Canadian Post, which doesnĎt seem to be correct.

Offline amnesia0287

  • Formerly Amnesia
  • Posts: 1174
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #873 on: Thu, 19 July 2018, 19:49:48 »
Which carrier did yuktsi use for your PC 910? While I have a tracking number, AfterShip recognizes it as Canadian Post, which doesnĎt seem to be correct.

The number he provides is aramex, it may convert to something else once itís in country.

Offline JubJubCity

  • Posts: 271
  • Location: Bay Area
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #874 on: Thu, 19 July 2018, 20:13:23 »
Any one have any issues with the TGR-Elaine pcb having a entire row not work?

Online romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8380
  • Location: The Windy City
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #875 on: Fri, 20 July 2018, 10:23:59 »
Any one have any issues with the TGR-Elaine pcb having a entire row not work?

What's the TGR Elaine?

Offline zekkin

  • Posts: 277
  • Location: New York
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #876 on: Fri, 20 July 2018, 11:16:07 »
Any one have any issues with the TGR-Elaine pcb having a entire row not work?

What's the TGR Elaine?
TGR-Elaine is the Singa PCB.
Murakumo | Kyuu | QXP | TGR-Alice | TGR-Jane v2

Offline Randalljai

  • Posts: 56
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #877 on: Wed, 01 August 2018, 01:20:52 »
Does anyone know if the TGR 910 VKC edition is supposed to be numbered on the weight?

Online romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8380
  • Location: The Windy City
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #878 on: Wed, 01 August 2018, 07:19:26 »
Does anyone know if the TGR 910 VKC edition is supposed to be numbered on the weight?


yuktsi might.

Offline Randalljai

  • Posts: 56
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #879 on: Wed, 01 August 2018, 10:46:40 »
Does anyone know if the TGR 910 VKC edition is supposed to be numbered on the weight?


yuktsi might.

Yeh, I've pmed Yuktsi. Just don't want to be buying a fake or anything :( THank you

Offline AresTheGod

  • Posts: 96
  • Location: Paris, France
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #880 on: Sat, 04 August 2018, 16:15:12 »
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?

Offline theillumedpanda

  • Posts: 251
  • Don't point that gun at me - I'm an unpaid intern!
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #881 on: Sat, 04 August 2018, 17:28:36 »
How do I have to solder those LED strips or whatever theyĎre called? IĎve never done that before and was a bit irritated that IĎd have to do that myself. Or am I missing something?

Offline Dymloslouire

  • Posts: 312
  • Location: ****posting @ r/mk Discord
  • I Love TKL.
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #882 on: Sun, 05 August 2018, 06:53:01 »
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?

Message Kawasaki161 . he can help you.

Jane CE - Jane v2 - 910 RE - 910 RE Polycarbonate - Alice - 420CL - **RT80**

Offline AresTheGod

  • Posts: 96
  • Location: Paris, France
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #883 on: Mon, 06 August 2018, 10:16:57 »
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?

Message Kawasaki161 . he can help you.

Thank you, just sent him a pm.

Offline Puddsy

  • nice
  • * Exalted Elder
  • Posts: 9528
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #884 on: Thu, 09 August 2018, 22:21:45 »
Hey, I'm from R1. While desoldering and resoldering I found that 1 column didn't seem to work (tested with a multimeter), so I was wondering if there was any ways to get an additional pcb that would be compatible with the TGR910?

Message Kawasaki161 . he can help you.

Thank you, just sent him a pm.

you probably just blew up a diode by accident, hope it's nothing major
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE "2Y10M" | TGR Alice "Pink + White" | MEME "Sound Meme" | Keycult No 1 "The Brass Behemoth" | Southpaw Fullsize (when it ships) | Daily driver: TGR Alice

I like what this guy said

Offline maxf

  • Posts: 37
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #885 on: Fri, 10 August 2018, 22:42:53 »
Anyone have a extra RGB kit?  Or two?

Sent from my Pixel 2 XL using Tapatalk


Online breckstar

  • Posts: 225
  • Location: Texas
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #886 on: Sat, 18 August 2018, 10:27:36 »
Anyone have a extra RGB kit?  Or two?

Sent from my Pixel 2 XL using Tapatalk
I didn't get the RGB kit but looking for anyone to confirm these are electronics for the RGB kit?

WS2812B - https://www.sparkfun.com/products/13667

WS2811 - https://www.adafruit.com/product/1378?gclid=CjwKCAjwh9_bBRA_EiwApObaOGsoHfbmq2gEJ308n8FYckjsXerAr6hrP98MvDDzQM1l1AnkQQ2UdxoC-6gQAvD_BwE

Don't really care about the spacer. Just want the 910 lit up.

Anyone mess with cerakoting as well? Looking to do it to mine sometime in the near future.

Edit: Anyone have the 910 plate file?
« Last Edit: Sat, 18 August 2018, 10:31:47 by breckstar »

Online vtachkov

  • Posts: 146
Re: [GB] TGR-910 CE - 99.99% Completed
« Reply #887 on: Sat, 18 August 2018, 13:18:21 »
Anyone have a extra RGB kit?  Or two?

Sent from my Pixel 2 XL using Tapatalk
I didn't get the RGB kit but looking for anyone to confirm these are electronics for the RGB kit?

WS2812B - https://www.sparkfun.com/products/13667

WS2811 - https://www.adafruit.com/product/1378?gclid=CjwKCAjwh9_bBRA_EiwApObaOGsoHfbmq2gEJ308n8FYckjsXerAr6hrP98MvDDzQM1l1AnkQQ2UdxoC-6gQAvD_BwE

Don't really care about the spacer. Just want the 910 lit up.

Anyone mess with cerakoting as well? Looking to do it to mine sometime in the near future.

Edit: Anyone have the 910 plate file?

I can't comment on the component, but just a word of caution. Even if you don't care about the underglow, you'll still have to solder the underglow RGB LEDs because they are in a circuit, or at the very least bridge them, since the 910 logo is the last one in the circuit.
ACR60 | COD67 | SINGA | Time TKL | TGR 910 CE

Offline Mcnos

  • Posts: 312
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #888 on: Thu, 23 August 2018, 00:19:17 »
Just a thought, does anyone know if there's a key combination to flash the PCB for the 910? Mines having issues and won't be recognized by the PC/Bootmapper
A cornered fox is more dangerous than a Jackal

TGR910 | (Reserved for TGR-Jane V2) | HHKB | Duck Viper V2 | KBD67 | E6V2 | (Reserved for Sakura Kyuu) | Mech27v2 | Tada68 | KBD5 | FC660M | Fjell | FC660CClueboard | X60 WKL & HHKB | Noxary 268 | AEK64 Brown Alps | KBD8X | HHKB Tofu | DC60 | Percent Canoe | YMD96


Offline yuktsi

  • * Maker
  • Thread Starter
  • Posts: 1105
  • Location: Muddy Confluence
  • Colour my life with the chaos of trouble
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #889 on: Thu, 23 August 2018, 03:58:30 »
Just a thought, does anyone know if there's a key combination to flash the PCB for the 910? Mines having issues and won't be recognized by the PC/Bootmapper
PMed
More
Poker 2 | LZ CE | Leopold FC700R | KMAC 1.2 | EXE | GON NS87 | GON Nerd TKL | Duck Poker | Duck Orion | Realforce 87u 55g | OTD 456GT | LZ B7 | OTD 360C | Ducky G2 Pro | Apple Extended | Apple M0116 | Apple M0116 | Cherry G80-1220HAD | Duck Octagon | HHKB Pro 2 | Duck Unicorn | LZ B8 | LZ RE | ENVKX | OTD 456GT | LZ FE | HHKB Type S | TX1800| Duck Orion V2 | LZ FE | KPad | KMAC Happy | ENVKX | LZ RV | KMAC 2 | Whale | Dolphin | EM7 | TGR Jane | VE.A | DK Saver | Matrix 103 | Whale | HHKB BT | Dolphin v2 | EM7 v2 | SSK | SSK (Blue Label) | LZ SQ | Duck Octagon v2 | TX84 | GON Mobik | TX-CP | LZ Ergo | KMAC Happy HHKB | TGR 910 | TGR Tris | Matrix 8xv1.2 | KMAC Mini | Mira | Fjell | 356mini | Dolphin GH | EM7 GH | TARO EXENT | Masterkey Pro L Crysta l OTD Koala | Duck Viper | Keycult no.1

Offline Mcnos

  • Posts: 312
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #890 on: Sat, 25 August 2018, 01:56:48 »
Okay confirmed that my PC hit it's death bed for who knows why. Anyone have an extra PCB/polycarb plate they have for sale?
A cornered fox is more dangerous than a Jackal

TGR910 | (Reserved for TGR-Jane V2) | HHKB | Duck Viper V2 | KBD67 | E6V2 | (Reserved for Sakura Kyuu) | Mech27v2 | Tada68 | KBD5 | FC660M | Fjell | FC660CClueboard | X60 WKL & HHKB | Noxary 268 | AEK64 Brown Alps | KBD8X | HHKB Tofu | DC60 | Percent Canoe | YMD96


Offline tokidokijake

  • * Destiny Supporter
  • Posts: 311
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #891 on: Thu, 01 November 2018, 14:43:15 »
Hey all, looking for some help building my board. First time Iím building and no clue what to do/how to install the rgb kit. I donít even know where to start. Any help would be greatly appreciated.

Offline KeyboardUser4

  • Formerly clasicks
  • Posts: 582
  • Location: Northeastern USA
  • a ramblin' man
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #892 on: Thu, 01 November 2018, 15:10:37 »
Hey all, looking for some help building my board. First time Iím building and no clue what to do/how to install the rgb kit. I donít even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's
Duck Blackbird | Duck Eagle v2 | Duck Lightsaver v3 | PC SINGA R2 | TGR Alice | Noxary x60 | QXP | TX60

Offline tokidokijake

  • * Destiny Supporter
  • Posts: 311
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #893 on: Thu, 01 November 2018, 15:17:25 »

Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time Iím building and no clue what to do/how to install the rgb kit. I donít even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

Offline KeyboardUser4

  • Formerly clasicks
  • Posts: 582
  • Location: Northeastern USA
  • a ramblin' man
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #894 on: Thu, 01 November 2018, 15:23:39 »

Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time Iím building and no clue what to do/how to install the rgb kit. I donít even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

hrmm, i asked some folks and it looks like its probably the leds these little guys - remove them from the black and they go on the 4 pin smd pads on the PCB


and this thing is the controller for the rgb's that i called a little spider :P


Edit: Rereading your post, I just want to clarify that this is for the BACKLIGHTING. If you want inswitch LED's you dont need any of these things
« Last Edit: Thu, 01 November 2018, 15:32:04 by KeyboardUser4 »
Duck Blackbird | Duck Eagle v2 | Duck Lightsaver v3 | PC SINGA R2 | TGR Alice | Noxary x60 | QXP | TX60

Offline Puddsy

  • nice
  • * Exalted Elder
  • Posts: 9528
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #895 on: Thu, 01 November 2018, 15:37:35 »

Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time Iím building and no clue what to do/how to install the rgb kit. I donít even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

the rgb kit is for underglow not caps
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE "2Y10M" | TGR Alice "Pink + White" | MEME "Sound Meme" | Keycult No 1 "The Brass Behemoth" | Southpaw Fullsize (when it ships) | Daily driver: TGR Alice

I like what this guy said

Offline tokidokijake

  • * Destiny Supporter
  • Posts: 311
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #896 on: Thu, 01 November 2018, 15:47:15 »
Gotcha. Thank you. And that underglow light is provided by?


Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time Iím building and no clue what to do/how to install the rgb kit. I donít even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

the rgb kit is for underglow not caps

Offline Puddsy

  • nice
  • * Exalted Elder
  • Posts: 9528
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #897 on: Thu, 01 November 2018, 16:08:53 »
Gotcha. Thank you. And that underglow light is provided by?


Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time Iím building and no clue what to do/how to install the rgb kit. I donít even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

the rgb kit is for underglow not caps

rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit

if the original buyer didn't order the rgb kit, there is no diffuser
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE "2Y10M" | TGR Alice "Pink + White" | MEME "Sound Meme" | Keycult No 1 "The Brass Behemoth" | Southpaw Fullsize (when it ships) | Daily driver: TGR Alice

I like what this guy said

Offline tokidokijake

  • * Destiny Supporter
  • Posts: 311
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #898 on: Thu, 01 November 2018, 16:42:19 »
Thanks. I am the original buyer and have the diffuser. So at this point I just need to buy some leds correct? Any recommendations? Thanks for the help!

Gotcha. Thank you. And that underglow light is provided by?


Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time Iím building and no clue what to do/how to install the rgb kit. I donít even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

the rgb kit is for underglow not caps

rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit

if the original buyer didn't order the rgb kit, there is no diffuser

Offline Puddsy

  • nice
  • * Exalted Elder
  • Posts: 9528
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TGR-910 CE - 100% Completed.
« Reply #899 on: Thu, 01 November 2018, 16:58:00 »
Thanks. I am the original buyer and have the diffuser. So at this point I just need to buy some leds correct? Any recommendations? Thanks for the help!

Gotcha. Thank you. And that underglow light is provided by?


Thank you! Yea I ordered the rgb kit so I do have that. What is the black rubber strip for? The one that looks like several blocks chained together?

Assuming I install that, then I would need to install leds individually for each cap?

Hey all, looking for some help building my board. First time Iím building and no clue what to do/how to install the rgb kit. I donít even know where to start. Any help would be greatly appreciated.

Hey bud, The RGB kit is optional - just in case you were not aware. If you do want to install it you will want to start with the RGB controller, its a little black square that looks like a spider - If you are comfortable doing SMD work you can try to do that than move on to the LED's

the rgb kit is for underglow not caps

rgb leds that you have to solder on to the bottom of the pcb and the diffuser that comes with the rgb kit

if the original buyer didn't order the rgb kit, there is no diffuser

and a rgb controller chip

im not sure of part no but i think it's in the op
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE "2Y10M" | TGR Alice "Pink + White" | MEME "Sound Meme" | Keycult No 1 "The Brass Behemoth" | Southpaw Fullsize (when it ships) | Daily driver: TGR Alice

I like what this guy said