NEW USERS, READ THIS!
0 Members and 1 Guest are viewing this topic.
Quote from: RominRonin on Wed, 23 May 2018, 06:58:41Hey, I'm looking forward to this gb going live, but I do have one more question that I think it's always worth bringing up:AFAIK, XDA currently do not currently offer homing bumps or bars, only scooped homing keys. Is there ANY chance of getting bumps or bars on this set? Can you ask the manufacturer if it's something they could do for us, or in general for the future?Heh, I'm not asking for much eh? They don't currently offer them. I'm not sure if they will in future since it would require new moulds and bumps are generally awkward when it comes to dye subbing.If you prefer to have bumps you could do a mod like this using a ball bearing as a homing key.
Hey, I'm looking forward to this gb going live, but I do have one more question that I think it's always worth bringing up:AFAIK, XDA currently do not currently offer homing bumps or bars, only scooped homing keys. Is there ANY chance of getting bumps or bars on this set? Can you ask the manufacturer if it's something they could do for us, or in general for the future?Heh, I'm not asking for much eh?
Quote from: dr_derivative on Wed, 23 May 2018, 08:04:31...Knowing this set was on the horizon, I finally threw my XDA Canvas on my daily driver to see if I really wanted to invest in another XDA set ( I previously only put them on a tester and wasn't impressed) and I find the deep dish homing caps to have a better feel than the regular caps. Have you considered doing the whole set in deep dish?
...
Quote from: dr_derivative on Wed, 23 May 2018, 08:04:31Quote from: RominRonin on Wed, 23 May 2018, 06:58:41Hey, I'm looking forward to this gb going live, but I do have one more question that I think it's always worth bringing up:AFAIK, XDA currently do not currently offer homing bumps or bars, only scooped homing keys. Is there ANY chance of getting bumps or bars on this set? Can you ask the manufacturer if it's something they could do for us, or in general for the future?Heh, I'm not asking for much eh? They don't currently offer them. I'm not sure if they will in future since it would require new moulds and bumps are generally awkward when it comes to dye subbing.If you prefer to have bumps you could do a mod like this using a ball bearing as a homing key.Knowing this set was on the horizon, I finally threw my XDA Canvas on my daily driver to see if I really wanted to invest in another XDA set ( I previously only put them on a tester and wasn't impressed) and I find the deep dish homing caps to have a better feel than the regular caps. Have you considered doing the whole set in deep dish?
Quote from: elfick on Wed, 23 May 2018, 15:36:35Quote from: dr_derivative on Wed, 23 May 2018, 08:04:31...Knowing this set was on the horizon, I finally threw my XDA Canvas on my daily driver to see if I really wanted to invest in another XDA set ( I previously only put them on a tester and wasn't impressed) and I find the deep dish homing caps to have a better feel than the regular caps. Have you considered doing the whole set in deep dish? I guess it's possible, but I'm not sure how it would affect lead times. The factory probably have way more moulds for standard 1u keys than deep dish keys. The other issue is that you lose homing keys. It's not something I'm doing because a lot of people prefer the flatness of XDA, but if you want to feel free to buy like 8 homing kits ).
Everytime i see the homing kit I think "Hunt donkey kong" instead oh huntdk
The 1.25 Shift is already part of the base modifier kits (both text and icon)
Any word on how long the GB will run? I'll be offline for a long weekend in the beginning of June and want to make sure I can get in on this.
Quote from: CustomerSupport on Thu, 24 May 2018, 15:53:01Any word on how long the GB will run? I'll be offline for a long weekend in the beginning of June and want to make sure I can get in on this.Just that one weekend in the beginning of June.
Quote from: romevi on Thu, 24 May 2018, 15:59:30Quote from: CustomerSupport on Thu, 24 May 2018, 15:53:01Any word on how long the GB will run? I'll be offline for a long weekend in the beginning of June and want to make sure I can get in on this.Just that one weekend in the beginning of June. )
Quote from: ideus on Thu, 24 May 2018, 17:16:02Quote from: romevi on Thu, 24 May 2018, 15:59:30Quote from: CustomerSupport on Thu, 24 May 2018, 15:53:01Any word on how long the GB will run? I'll be offline for a long weekend in the beginning of June and want to make sure I can get in on this.Just that one weekend in the beginning of June. ) NOOOOOoooooooo!
Quote from: CustomerSupport on Thu, 24 May 2018, 17:28:56Quote from: ideus on Thu, 24 May 2018, 17:16:02Quote from: romevi on Thu, 24 May 2018, 15:59:30Quote from: CustomerSupport on Thu, 24 May 2018, 15:53:01Any word on how long the GB will run? I'll be offline for a long weekend in the beginning of June and want to make sure I can get in on this.Just that one weekend in the beginning of June. ) NOOOOOoooooooo!Show Image
Quote from: romevi on Thu, 24 May 2018, 17:31:54Quote from: CustomerSupport on Thu, 24 May 2018, 17:28:56Quote from: ideus on Thu, 24 May 2018, 17:16:02Quote from: romevi on Thu, 24 May 2018, 15:59:30Quote from: CustomerSupport on Thu, 24 May 2018, 15:53:01Any word on how long the GB will run? I'll be offline for a long weekend in the beginning of June and want to make sure I can get in on this.Just that one weekend in the beginning of June. ) NOOOOOoooooooo!Show ImageThis made my day, thank you!
Is there any plans/hope for an add-on kit with windowed keys?
So what company is doing the dyesub work? I didn't see it on the front page. The only company doing quality dyesub is Signature Plastics. I'm not talking about the profile or keycap, but the legend printing. The dyesub work coming out of China factories is junk.
Pretty sure SP doesn’t do xda profile. And the dye sub on my xda seems decent so far (or maybe I’m just not picky enough)
Quote from: tomwang2011 on Fri, 01 June 2018, 11:48:19Pretty sure SP doesn’t do xda profile. And the dye sub on my xda seems decent so far (or maybe I’m just not picky enough)Thanks for the info. When it comes to dyesub I will wait to see actual samples from the factory producing them.
Samples were posted earlier in the thread?Not sure if they just went missed.
Quote from: xondat on Fri, 01 June 2018, 22:07:43Samples were posted earlier in the thread?Not sure if they just went missed.I believe those were from the old factory, which he said later he won't be using. I don't know if he's said if he found a new one.
Can you just add the "^" + "~" keycap to the international set? That would make it perfect.
XDA canvas R2 launched on Massdrop, I guess this will give you guys more time to prepare for the GB? These sets are very similar but both of them are unique. I want them both, and many others would probably appreciate given more time to gather the funds . /watched.
At the moment I'm not sure when we'll finally start this groupbuy. We had hoped to start before Canvas R2, but in the end we couldn't get everything ready in time and Canvas launched today. IMO running alongside Canvas isn't a good idea so we might have to wait until after. I haven't really discussed this with the vendors yet though, so I can't say for sure.
Quote from: mikenogo on Mon, 04 June 2018, 11:49:16XDA canvas R2 launched on Massdrop, I guess this will give you guys more time to prepare for the GB? These sets are very similar but both of them are unique. I want them both, and many others would probably appreciate given more time to gather the funds . /watched.You replied just as I was typing out my update, see the last paragraph
Update: new samples Show ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImagezFrontier has the new samples in hand and took these amazing photos.The dye-sub quality looks excellent, although I haven't seen it in person yet. It has similar alignment issues to the previous samples, which is expected since I sent them the same design files. One thing I did notice was an error on the ⌫ and ⌧ keys where only one half of the cross is actually printed. I have no idea why so I'll be bringing this up so it doesn't happen in the final product.At the moment I'm not sure when we'll finally start this groupbuy. We had hoped to start before Canvas R2, but in the end we couldn't get everything ready in time and Canvas launched today. IMO running alongside Canvas isn't a good idea so we might have to wait until after. I haven't really discussed this with the vendors yet though, so I can't say for sure.
where will this be released? GH or MD?
Quote from: dr_derivative on Mon, 04 June 2018, 12:07:47Update: new samples Show ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImagezFrontier has the new samples in hand and took these amazing photos.The dye-sub quality looks excellent, although I haven't seen it in person yet. It has similar alignment issues to the previous samples, which is expected since I sent them the same design files. One thing I did notice was an error on the ⌫ and ⌧ keys where only one half of the cross is actually printed. I have no idea why so I'll be bringing this up so it doesn't happen in the final product.At the moment I'm not sure when we'll finally start this groupbuy. We had hoped to start before Canvas R2, but in the end we couldn't get everything ready in time and Canvas launched today. IMO running alongside Canvas isn't a good idea so we might have to wait until after. I haven't really discussed this with the vendors yet though, so I can't say for sure.Holly god of keyboard that katakana is fantastic!but it's quite yellow compare to the renders
which keyboard is the burgundy red one on the first page (the render )?
Quote from: _ODIN_ on Mon, 04 June 2018, 16:47:33which keyboard is the burgundy red one on the first page (the render )?RAMA M60-A
Quote from: Thats to big on Mon, 04 June 2018, 13:52:38Quote from: dr_derivative on Mon, 04 June 2018, 12:07:47Update: new samples Show ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImageShow ImagezFrontier has the new samples in hand and took these amazing photos.The dye-sub quality looks excellent, although I haven't seen it in person yet. It has similar alignment issues to the previous samples, which is expected since I sent them the same design files. One thing I did notice was an error on the ⌫ and ⌧ keys where only one half of the cross is actually printed. I have no idea why so I'll be bringing this up so it doesn't happen in the final product.At the moment I'm not sure when we'll finally start this groupbuy. We had hoped to start before Canvas R2, but in the end we couldn't get everything ready in time and Canvas launched today. IMO running alongside Canvas isn't a good idea so we might have to wait until after. I haven't really discussed this with the vendors yet though, so I can't say for sure.Holly god of keyboard that katakana is fantastic!but it's quite yellow compare to the rendersThe yellow is because these were photographed in sunlight I think. AFAIK these aren't colour matched anyway, the final keyset will be the same light grey as the AEK.Quote from: oldcat on Mon, 04 June 2018, 15:08:21where will this be released? GH or MD? It will be run through Dixie Mech for US, MyKeyboard.eu for EU, MechKeys.ca for Canada, and zFrontier for Asia/Australia and the rest of the world.
Any chance for the international keys to support the three symbols per key where it applies?Show Image
Quote from: ideus on Mon, 04 June 2018, 22:47:59Any chance for the international keys to support the three symbols per key where it applies?Show Image+1