Author Topic: [GB] TMO50 keyboard - COMPLETE  (Read 38173 times)

0 Members and 3 Guests are viewing this topic.

Offline William_S_Jones

  • Posts: 487
  • Location: Charlotte, NC
  • Best Prime Ever!!!
[GB] TMO50 keyboard
« Reply #200 on: Mon, 15 October 2018, 11:48:21 »
Talking about R2 - let's see. I hope I can run it myself but we should finish this one and then see how it goes.

That's good to hear. This is the first <60% i've been intrested in.

Same here, I love itís design; itís basically a mini Leopold FC660C & love to make those left buttons as work hotkeys if I get the chance to buy a rd2.


Sent from my iPhone using Tapatalk

Offline Lormania

  • Posts: 174
  • Location: Denver
Re: [GB] TMO50 keyboard
« Reply #201 on: Tue, 16 October 2018, 22:17:48 »
Does anyone know the link to where I can watch the build?

Offline cucgach

  • Posts: 107
  • Location: Vietnam
Re: [GB] TMO50 keyboard
« Reply #202 on: Wed, 17 October 2018, 07:09:05 »
Does anyone know the link to where I can watch the build?

+1

I missed the live stream :(
Current: Filco TKL Majestouch | TX60 antique brass | NIU40 silver | H360 burgundy | Rama M6-A | tr.mk wooden 60 | Imperial Hue 60 | Tofu 65 silver | Tofu WKL navy | TMO50 green/poly | HB85 black/gray | TX108se titan gray (unbuild)| Gergo Kit: black PCB (unbuild)
Future: Space65 gray/silver | Typewriter68 ceramic white
Past: TinaC HHKB gray | TX84Se titan gray | Leopold 660M white | GSX96 R2 purple | Rama M60-A lake | 0.01 Z70 silver | E7-V1 MAO

Offline dangboy

  • Posts: 61
  • Location: California, USA
  • ayy lmao
Re: [GB] TMO50 keyboard
« Reply #203 on: Fri, 19 October 2018, 12:40:09 »
Kinda regretting not opting in for extra parts  :'( .

If ne1 ordered extra pcb+plate and is super regretting it PM me and I'll buy them from you when they ship in the year 2037
« Last Edit: Mon, 22 October 2018, 01:41:09 by dangboy »

Offline lazyfart

  • Posts: 74
  • Location: Singapore
Re: [GB] TMO50 keyboard
« Reply #204 on: Mon, 22 October 2018, 00:35:31 »
^ Same. Regret not getting an extra plate and PCB.  :( If anyone wants to sell me theirs I'll be more than happy to buy it  ;D

Offline hndle

  • Posts: 87
Re: [GB] TMO50 keyboard
« Reply #205 on: Mon, 22 October 2018, 07:19:23 »
Me too. :-X
If anyone regrets buying an extra aluminum bottom, sell it to me.

Offline William_S_Jones

  • Posts: 487
  • Location: Charlotte, NC
  • Best Prime Ever!!!
Re: [GB] TMO50 keyboard
« Reply #206 on: Tue, 30 October 2018, 23:56:44 »
Damn, I want one of these bad, rd 2 please, & I want 2 kits (1 polycarb & 1 aluminum)


Sent from my iPhone using Tapatalk

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8675
  • Location: The Windy City
Re: [GB] TMO50 keyboard
« Reply #207 on: Wed, 31 October 2018, 00:21:26 »
Puddsy

Offline funderburker

  • * Exquisite Elder
  • Posts: 1052
  • Location: Latvia, Riga
Re: [GB] TMO50 keyboard
« Reply #208 on: Wed, 31 October 2018, 01:37:33 »
LAGOM 🐸-T | 2x TMO50 FE | Untitled TKL in the works

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 10966
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice

Puddsy's just a post ****

Offline romevi

  • Formerly romevi
  • * Exalted Elder
  • Posts: 8675
  • Location: The Windy City


Offline tex_live_utility

  • Posts: 590
Re: [GB] TMO50 keyboard
« Reply #212 on: Tue, 13 November 2018, 09:03:12 »
Sucks that I missed this... was having serious personal issues last few months and had to step away from keyboards for a while.

Please let there be a R2, this was one of the only keyboards I feel truly sad about missing out on.

Alternatively I will buy someone's GB slot including shipping, PayPal fees, etc.
« Last Edit: Tue, 13 November 2018, 09:06:25 by tex_live_utility »

Offline William_S_Jones

  • Posts: 487
  • Location: Charlotte, NC
  • Best Prime Ever!!!
Re: [GB] TMO50 keyboard
« Reply #213 on: Tue, 13 November 2018, 11:04:23 »
Sucks that I missed this... was having serious personal issues last few months and had to step away from keyboards for a while.

Please let there be a R2, this was one of the only keyboards I feel truly sad about missing out on.

Alternatively I will buy someone's GB slot including shipping, PayPal fees, etc.
I agree went through the same thing. Sold my collection over a year due to personal issues, so I understand. i just returned to MKBs about a month & a half ago. As of now, Iím recovering some of the stuff that I sold & trying to call in some favors. My fingers are alsofor TMO50 rd 2!!!


Sent from my iPhone using Tapatalk

Offline Ashardalon

  • Posts: 167
  • Location: Victoria, Canada
Re: [GB] TMO50 keyboard
« Reply #214 on: Sun, 18 November 2018, 17:39:23 »
There was a really lovely person I got to meet at the Vancouver meetup that had the proto 00/10 TMO50. If there's a second round of this I'd love to get in on it! Either the purple or the Olivia colour for sure.
Qlavier Qustom | RAMA KOYU | aanzee | Canoe | Candybar | Leopold FC980C

Offline William_S_Jones

  • Posts: 487
  • Location: Charlotte, NC
  • Best Prime Ever!!!
[GB] TMO50 keyboard
« Reply #215 on: Sun, 18 November 2018, 17:43:15 »
There was a really lovely person I got to meet at the Vancouver meetup that had the proto 00/10 TMO50. If there's a second round of this I'd love to get in on it! Either the purple or the Olivia colour for sure.
Did you get any pictures of it? I really hope that rd 2 happens. I want one too. Dixie Mech posted his on RMK today. Iím attaching the picture & hereís the post: https://reddit.com/r/MechanicalKeyboards/comments/9y3rg0/refrigerator_custom_photoshoot/



Sent from my iPhone using Tapatalk

Offline sleepy

  • Formerly palth
  • Posts: 126
Re: [GB] TMO50 keyboard
« Reply #216 on: Sun, 18 November 2018, 23:22:20 »
There was a really lovely person I got to meet at the Vancouver meetup that had the proto 00/10 TMO50. If there's a second round of this I'd love to get in on it! Either the purple or the Olivia colour for sure.

oh hey!! that's me!

Did you get any pictures of it? I really hope that rd 2 happens. I want one too. Dixie Mech posted his on RMK today. Iím attaching the picture & hereís the post: https://reddit.com/r/MechanicalKeyboards/comments/9y3rg0/refrigerator_custom_photoshoot/
Show Image

Sent from my iPhone using Tapatalk

I posted a few earlier in the thread! Here they are again:







I'll make sure to take some better pictures soon. Also, I know theres a few meetup photos fluttering around somewhere. I'll try find them and post them in here :)


Offline the_high_5

  • Posts: 70
Re: [GB] TMO50 keyboard
« Reply #217 on: Mon, 19 November 2018, 00:20:43 »
I would love to take part in round 2 if/when it happens! When everyone gets there's from the first round, can you post your layers or what you've programmed the 4 functions keys for? Definitely interested in what everyone comes up with!

Sent from my Pixel 2 using Tapatalk


Offline Ashardalon

  • Posts: 167
  • Location: Victoria, Canada
Re: [GB] TMO50 keyboard
« Reply #218 on: Mon, 19 November 2018, 02:51:15 »
There was a really lovely person I got to meet at the Vancouver meetup that had the proto 00/10 TMO50. If there's a second round of this I'd love to get in on it! Either the purple or the Olivia colour for sure.

oh hey!! that's me!

Did you get any pictures of it? I really hope that rd 2 happens. I want one too. Dixie Mech posted his on RMK today. Iím attaching the picture & hereís the post: https://reddit.com/r/MechanicalKeyboards/comments/9y3rg0/refrigerator_custom_photoshoot/
Show Image

Sent from my iPhone using Tapatalk

I posted a few earlier in the thread! Here they are again:

Show Image


Show Image


Show Image


I'll make sure to take some better pictures soon. Also, I know theres a few meetup photos fluttering around somewhere. I'll try find them and post them in here :)

That's right! It was definitely my favourite board when I was there, it was just so cute! It's really made me want to get one of these, so I'm really hoping a round two comes next year.
Qlavier Qustom | RAMA KOYU | aanzee | Canoe | Candybar | Leopold FC980C

Offline ReverbSlush

  • Posts: 188
  • 16/52 RNG score
Re: [GB] TMO50 keyboard
« Reply #219 on: Mon, 19 November 2018, 07:30:25 »
There was a really lovely person I got to meet at the Vancouver meetup that had the proto 00/10 TMO50. If there's a second round of this I'd love to get in on it! Either the purple or the Olivia colour for sure.

oh hey!! that's me!

Did you get any pictures of it? I really hope that rd 2 happens. I want one too. Dixie Mech posted his on RMK today. Iím attaching the picture & hereís the post: https://reddit.com/r/MechanicalKeyboards/comments/9y3rg0/refrigerator_custom_photoshoot/
Show Image

Sent from my iPhone using Tapatalk

I posted a few earlier in the thread! Here they are again:

Show Image


Show Image


Show Image


I'll make sure to take some better pictures soon. Also, I know theres a few meetup photos fluttering around somewhere. I'll try find them and post them in here :)

is that poly bottom? I was thinking maybe I should have spent a little more to get a matching color, but now I'm happy.  Great pics!

Offline sleepy

  • Formerly palth
  • Posts: 126
Re: [GB] TMO50 keyboard
« Reply #220 on: Mon, 19 November 2018, 12:00:27 »
That's right! It was definitely my favourite board when I was there, it was just so cute! It's really made me want to get one of these, so I'm really hoping a round two comes next year.

aww thanks!! <3 i had a lot of fun seeing people there, I felt a lot less anxious than last year's meetup. I hope you can get your hands on a TMO, it's a lovely board!


is that poly bottom? I was thinking maybe I should have spent a little more to get a matching color, but now I'm happy.  Great pics!

Yep!! PC bottom and polished brass plate. Just a note though that the color I have for the top is a custom one that's not in the GB.



Offline tex_live_utility

  • Posts: 590
Re: [GB] TMO50 keyboard
« Reply #221 on: Mon, 26 November 2018, 18:55:56 »
Any thoughts on full polycarb TMO-50 for round 2

Offline Jae-3soteric

  • Formerly Jon_Flynn
  • Posts: 391
  • Location: United Kingdom
  • https://www.youtube.com/channel/UCAIHiFKJt69HNad6r
    • Jae | Top Clack
Re: [GB] TMO50 keyboard
« Reply #222 on: Mon, 26 November 2018, 18:57:03 »
Any thoughts on full polycarb TMO-50 for round 2


Man just a round 2 would be nice still gutted I missed this


Sent from my iPhone using Tapatalk Pro

Offline William_S_Jones

  • Posts: 487
  • Location: Charlotte, NC
  • Best Prime Ever!!!
Re: [GB] TMO50 keyboard
« Reply #223 on: Mon, 26 November 2018, 19:01:22 »
Any thoughts on full polycarb TMO-50 for round 2


Man just a round 2 would be nice still gutted I missed this


Sent from my iPhone using Tapatalk Pro
Iím in the same boat, my are crossed for rd 2


Sent from my iPhone using Tapatalk

Offline typischt

  • Posts: 238
Re: [GB] TMO50 keyboard
« Reply #224 on: Mon, 26 November 2018, 19:14:43 »
Any thoughts on full polycarb TMO-50 for round 2
I think they tried, but it "morphed" / bent / whatever you want to call it / too much and therefore they decided to drop the idea (at least for this R1).

Offline funderburker

  • * Exquisite Elder
  • Posts: 1052
  • Location: Latvia, Riga
Re: [GB] TMO50 keyboard
« Reply #225 on: Tue, 27 November 2018, 00:44:58 »
Any thoughts on full polycarb TMO-50 for round 2
I think they tried, but it "morphed" / bent / whatever you want to call it / too much and therefore they decided to drop the idea (at least for this R1).

You're correct. Poly top was slightly warped. Enough so to be a no-go for a GB. It's due to the thin bezels so the current design will never be offered with a poly top.
LAGOM 🐸-T | 2x TMO50 FE | Untitled TKL in the works

Offline cucgach

  • Posts: 107
  • Location: Vietnam
Re: [GB] TMO50 keyboard
« Reply #226 on: Tue, 27 November 2018, 07:41:58 »
I was hope can get it before Xmas/New Year but for now, the schedule is early next year.. so, Christmas doesn't come early this year :)
Current: Filco TKL Majestouch | TX60 antique brass | NIU40 silver | H360 burgundy | Rama M6-A | tr.mk wooden 60 | Imperial Hue 60 | Tofu 65 silver | Tofu WKL navy | TMO50 green/poly | HB85 black/gray | TX108se titan gray (unbuild)| Gergo Kit: black PCB (unbuild)
Future: Space65 gray/silver | Typewriter68 ceramic white
Past: TinaC HHKB gray | TX84Se titan gray | Leopold 660M white | GSX96 R2 purple | Rama M60-A lake | 0.01 Z70 silver | E7-V1 MAO

Offline funderburker

  • * Exquisite Elder
  • Posts: 1052
  • Location: Latvia, Riga
Re: [GB] TMO50 keyboard
« Reply #227 on: Tue, 27 November 2018, 07:59:21 »
I was hope can get it before Xmas/New Year but for now, the schedule is early next year.. so, Christmas doesn't come early this year :)

I talked with Kelly about this yesterday and the boards are still in QC if I understand correctly so it'll be with Kelly this year hopefully. But then there's Christmas and it's best to wait until the Christmas shipping rush dies down a bit. Don't quote me on WHEN the boards will be shipped but I'm rooting that QC goes well and they're shipped early next year. If so then it's still a good turnaround given GB started late September. ;)
LAGOM 🐸-T | 2x TMO50 FE | Untitled TKL in the works

Offline gilmoregrills

  • Posts: 95
  • Location: London, UK
Re: [GB] TMO50 keyboard
« Reply #228 on: Tue, 27 November 2018, 08:16:20 »
I was hope can get it before Xmas/New Year but for now, the schedule is early next year.. so, Christmas doesn't come early this year :)

I talked with Kelly about this yesterday and the boards are still in QC if I understand correctly so it'll be with Kelly this year hopefully. But then there's Christmas and it's best to wait until the Christmas shipping rush dies down a bit. Don't quote me on WHEN the boards will be shipped but I'm rooting that QC goes well and they're shipped early next year. If so then it's still a good turnaround given GB started late September. ;)

I'm honestly so happy that it's not going out before Christmas. As impatient as I am, shipping things internationally over that period seems like a recipe for disappointment

Offline cucgach

  • Posts: 107
  • Location: Vietnam
Re: [GB] TMO50 keyboard
« Reply #229 on: Thu, 29 November 2018, 07:16:42 »
i do agree with both of you. I'm always choosing quality over shipment/quantity... as I said, I just hope, it's like a Christmas gift for myself this year :))
Current: Filco TKL Majestouch | TX60 antique brass | NIU40 silver | H360 burgundy | Rama M6-A | tr.mk wooden 60 | Imperial Hue 60 | Tofu 65 silver | Tofu WKL navy | TMO50 green/poly | HB85 black/gray | TX108se titan gray (unbuild)| Gergo Kit: black PCB (unbuild)
Future: Space65 gray/silver | Typewriter68 ceramic white
Past: TinaC HHKB gray | TX84Se titan gray | Leopold 660M white | GSX96 R2 purple | Rama M60-A lake | 0.01 Z70 silver | E7-V1 MAO

Offline omgkittiesyay

  • Posts: 22
Re: [GB] TMO50 keyboard
« Reply #230 on: Tue, 11 December 2018, 12:07:34 »
I'm sure its a long shot but if anyone would be interested in swapping a green top for a silver one let me know  :D

Offline funderburker

  • * Exquisite Elder
  • Posts: 1052
  • Location: Latvia, Riga
Re: [GB] TMO50 keyboard
« Reply #231 on: Thu, 13 December 2018, 16:06:52 »
Just wanted to share this as I'm finally on a TMO50 myself. It's a 3d printed one with a POM plate that's been sitting around since March (I think?).

3d printed case, 1.5mm POM plate (universal)
Hako Clears (1st run)
Screw-in genuine stabs (band-aid mod, clipped, no lube)
Laser-etched Cherry alphas (PBT), GMK Plum on the mods.

LAGOM 🐸-T | 2x TMO50 FE | Untitled TKL in the works

Offline sleepy

  • Formerly palth
  • Posts: 126
Re: [GB] TMO50 keyboard
« Reply #232 on: Thu, 13 December 2018, 17:28:13 »
Just wanted to share this as I'm finally on a TMO50 myself. It's a 3d printed one with a POM plate that's been sitting around since March (I think?).

3d printed case, 1.5mm POM plate (universal)
Hako Clears (1st run)
Screw-in genuine stabs (band-aid mod, clipped, no lube)
Laser-etched Cherry alphas (PBT), GMK Plum on the mods.

Show Image


Nice! I love how those keycaps look as well. Hope you're doing well Funder

Offline gilmoregrills

  • Posts: 95
  • Location: London, UK
Re: [GB] TMO50 keyboard
« Reply #233 on: Thu, 13 December 2018, 18:07:44 »
Just wanted to share this as I'm finally on a TMO50 myself. It's a 3d printed one with a POM plate that's been sitting around since March (I think?).

3d printed case, 1.5mm POM plate (universal)
Hako Clears (1st run)
Screw-in genuine stabs (band-aid mod, clipped, no lube)
Laser-etched Cherry alphas (PBT), GMK Plum on the mods.

Show Image


omg it looks so good!! 3D printing is at least one way to get that sweet white look from the original renders ;) Hope you're enjoying it

Offline Ashardalon

  • Posts: 167
  • Location: Victoria, Canada
Re: [GB] TMO50 keyboard
« Reply #234 on: Thu, 13 December 2018, 19:57:46 »
Just wanted to share this as I'm finally on a TMO50 myself. It's a 3d printed one with a POM plate that's been sitting around since March (I think?).

3d printed case, 1.5mm POM plate (universal)
Hako Clears (1st run)
Screw-in genuine stabs (band-aid mod, clipped, no lube)
Laser-etched Cherry alphas (PBT), GMK Plum on the mods.

Show Image


Wow that is an incredibly clean look, I'd love to pay for one of these, I love 3D-printed cases and fell in love with the TMO50 when I saw it at the Vancouver meetup.
Qlavier Qustom | RAMA KOYU | aanzee | Canoe | Candybar | Leopold FC980C

Offline cucgach

  • Posts: 107
  • Location: Vietnam
Re: [GB] TMO50 keyboard
« Reply #235 on: Thu, 13 December 2018, 20:19:24 »
neat!!!!
Current: Filco TKL Majestouch | TX60 antique brass | NIU40 silver | H360 burgundy | Rama M6-A | tr.mk wooden 60 | Imperial Hue 60 | Tofu 65 silver | Tofu WKL navy | TMO50 green/poly | HB85 black/gray | TX108se titan gray (unbuild)| Gergo Kit: black PCB (unbuild)
Future: Space65 gray/silver | Typewriter68 ceramic white
Past: TinaC HHKB gray | TX84Se titan gray | Leopold 660M white | GSX96 R2 purple | Rama M60-A lake | 0.01 Z70 silver | E7-V1 MAO

Offline dangboy

  • Posts: 61
  • Location: California, USA
  • ayy lmao
Re: [GB] TMO50 keyboard
« Reply #236 on: Mon, 17 December 2018, 17:19:01 »
nice
« Last Edit: Wed, 19 December 2018, 03:31:19 by dangboy »

Offline Lormania

  • Posts: 174
  • Location: Denver
Re: [GB] TMO50 keyboard
« Reply #237 on: Mon, 17 December 2018, 17:32:48 »
If anyone wants to sell me their grey bottom let me know :)

Offline CrazyNun

  • Posts: 28
Re: [GB] TMO50 keyboard
« Reply #238 on: Wed, 19 December 2018, 09:05:23 »
Just wanted to share this as I'm finally on a TMO50 myself. It's a 3d printed one with a POM plate that's been sitting around since March (I think?).

3d printed case, 1.5mm POM plate (universal)
Hako Clears (1st run)
Screw-in genuine stabs (band-aid mod, clipped, no lube)
Laser-etched Cherry alphas (PBT), GMK Plum on the mods.

Show Image



Gorgeous case.  Been looking at Keyboard Belle's kb line, didn't see this though. Did you print it yourself? Be curious to know other 3d printed case vendors if you are aware of any.

Offline funderburker

  • * Exquisite Elder
  • Posts: 1052
  • Location: Latvia, Riga
Re: [GB] TMO50 keyboard
« Reply #239 on: Wed, 19 December 2018, 14:33:35 »
Just wanted to share this as I'm finally on a TMO50 myself. It's a 3d printed one with a POM plate that's been sitting around since March (I think?).

3d printed case, 1.5mm POM plate (universal)
Hako Clears (1st run)
Screw-in genuine stabs (band-aid mod, clipped, no lube)
Laser-etched Cherry alphas (PBT), GMK Plum on the mods.

Show Image



Gorgeous case.  Been looking at Keyboard Belle's kb line, didn't see this though. Did you print it yourself? Be curious to know other 3d printed case vendors if you are aware of any.

Yeah, it's a prototype 3d print so there's some quarks. I printed myself a while back, it's the board I used as IC photos of prototype. Pretty much unchanged from the outside but there's some tolerances (top and bottom gets stuck together so I haven't even screwed it shut) and stuff like plate not actually screwing in. It's just that plastic shrinks and I didn't get it right. :D
LAGOM 🐸-T | 2x TMO50 FE | Untitled TKL in the works

Offline dangboy

  • Posts: 61
  • Location: California, USA
  • ayy lmao
Re: [GB] TMO50 keyboard
« Reply #240 on: Fri, 21 December 2018, 02:14:07 »
nice
« Last Edit: Thu, 03 January 2019, 17:47:56 by dangboy »

Offline Lormania

  • Posts: 174
  • Location: Denver
Re: [GB] TMO50 keyboard
« Reply #241 on: Thu, 03 January 2019, 17:26:11 »
Boy do they look good! All those colors look so vibrant I wish I was able to order more top pieces! Can't wait to see people's boards!

Offline Lormania

  • Posts: 174
  • Location: Denver
Re: [GB] TMO50 keyboard
« Reply #242 on: Fri, 04 January 2019, 10:53:20 »
I purchased a green bottom (also have polycarb) but I think I am going in a different direction with this build so if anyone wants to trade bottom pieces then let me know! Or if anyone wants to sell one of there extra bottom pieces that works as well.

Offline Sent

  • Simplistic Serenity
  • * Exquisite Elder
  • Posts: 2140
  • Location: :thinking:
  • Į\_(ツ)_/Į
Re: [GB] TMO50 keyboard
« Reply #243 on: Sun, 06 January 2019, 14:26:34 »
I can't wait until people start posting photos when they get theirs.  That'll have to tide me over until R2.

Offline William_S_Jones

  • Posts: 487
  • Location: Charlotte, NC
  • Best Prime Ever!!!
Re: [GB] TMO50 keyboard
« Reply #244 on: Sun, 06 January 2019, 17:18:50 »
I can't wait until people start posting photos when they get theirs.  That'll have to tide me over until R2.

I agree, Iím in the same boat!


Sent from my iPhone using Tapatalk

Offline nocilantroplz

  • Posts: 13
Re: [GB] TMO50 keyboard
« Reply #245 on: Tue, 08 January 2019, 18:31:38 »
does anyone have experience with the smaller stagger?   Is it a noticeable difference?  Now I'm 2nd guessing...  the default stagger option is still base keycap compatible right? just using some keys from different rows?
I use the small stagger on my TMO. It is a noticeable difference at first, but I adjusted pretty quickly. I'm not the fastest typer, so I'm not sure if it makes more of a difference on the top end. For me it was just a matter of typing with it, and I got the hang pretty quickly, even after moving between boards. That being said, I think if I get another plate or desolder, I might change it to the normal layout just to see how that feels. I think I like that a little better aesthetically, though I definitely appreciate the compatibility of the small stagger.

I prefer smaller stagger in fact I love my ergodox board which is ortholinear. Would you mind sharing a picture of your TMO? I'm a bit confused about getting the 0.25/0.25 stagger setup. Thank you!

Offline godinjointform

  • * Destiny Supporter
  • Posts: 158
Re: [GB] TMO50 keyboard
« Reply #246 on: Tue, 08 January 2019, 19:09:26 »
I prefer smaller stagger in fact I love my ergodox board which is ortholinear. Would you mind sharing a picture of your TMO? I'm a bit confused about getting the 0.25/0.25 stagger setup. Thank you!
Yeah, no problem!

Offline gilmoregrills

  • Posts: 95
  • Location: London, UK
Re: [GB] TMO50 keyboard
« Reply #247 on: Thu, 10 January 2019, 07:15:18 »
Hey y'all! The first page says which LEDs to use for indicators, but does anyone have any advice on the type/size of LEDs to use for underglow?

Got switches and stabs all ready, but I've never built a board with lighting :confused:

Offline Sent

  • Simplistic Serenity
  • * Exquisite Elder
  • Posts: 2140
  • Location: :thinking:
  • Į\_(ツ)_/Į
Re: [GB] TMO50 keyboard
« Reply #248 on: Thu, 10 January 2019, 08:36:31 »
Yeah, no problem!
Show Image


This thing is so cute. 

Offline Acereconkeys

  • Posts: 403
  • Location: West Coast US of A
  • Happiness = life - expectations
Re: [GB] TMO50 keyboard
« Reply #249 on: Thu, 10 January 2019, 11:34:47 »
Hey y'all! The first page says which LEDs to use for indicators, but does anyone have any advice on the type/size of LEDs to use for underglow?

Got switches and stabs all ready, but I've never built a board with lighting :confused:

Underglow LEDs are RGB and come installed. :)
Acrylic Clueboard | Tex Blue Alps TKL | TMO50 Incoming | QXP Incoming | Realforce RGB | Nyquist

Current obsession: https://geekhack.org/index.php?topic=94675.0