Author Topic: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)  (Read 59058 times)

0 Members and 2 Guests are viewing this topic.

Offline Ashardalon

  • Posts: 72
  • Location: Victoria, Canada
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #250 on: Mon, 10 December 2018, 14:51:59 »
I sent in a request for an invoice a little while ago but haven't received any as of yet. Would I be able to get an update on this, please?
RAMA KOYU (Haze) - Unbuilt | aanzee (PC) - Unbuilt | Tofu65 w/ Silent Reds | FC980C - heavily modded | FC660M & FC210TP - Blacks

Offline SuperVan

  • Thread Starter
  • Posts: 113
  • Location: SPB
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #251 on: Mon, 10 December 2018, 15:14:38 »
I sent in a request for an invoice a little while ago but haven't received any as of yet. Would I be able to get an update on this, please?
Thanks for your support. I'm sending invoices now. Wait a moment plz, I need a little time.

Offline donutcat

  • * Vendor
  • Posts: 1007
  • Location: Shelby, NC
  • I have ideas. Sometimes they're even good ideas.
    • Donut Cables
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #252 on: Mon, 10 December 2018, 15:41:01 »
With the price drop I'm really considering going in on these and comparing them to Holy Pandas or playing around with the spring weight, but the PayPal fees are a bit ****ty, especially since PayPal has specifically stated not to charge it on orders like this.

Pretty common practice in the keyboard community. I can't remember the last KB GB I joined outside of MD that hasn't had a paypal fee included.

TBF, most vendors doing keyset GBs have fees calculated ahead of time. It's not especially difficult to just do (your price)/.956(for intl orders, or just .97 for CONUS only) to get approximately what the price will be with the fee included.
« Last Edit: Mon, 10 December 2018, 15:44:32 by donutcat »

Offline SuperVan

  • Thread Starter
  • Posts: 113
  • Location: SPB
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #253 on: Mon, 10 December 2018, 17:02:07 »
Hi guys,
Thanks for all your support. The first 50 invoices have seen sent. Feel free to contact me if you have any question.

Offline booleanjulien

  • Posts: 36
  • Location: Boston, MA
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #254 on: Mon, 10 December 2018, 17:10:46 »
50 out of how many? Still waiting for mine.

Offline SuperVan

  • Thread Starter
  • Posts: 113
  • Location: SPB
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #255 on: Mon, 10 December 2018, 17:16:49 »
50 out of how many? Still waiting for mine.
I will try to finish sending invoices tomorrow. ;D

Offline Darknight00z

  • Posts: 441
  • Location: UK
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #256 on: Mon, 10 December 2018, 17:17:44 »
50 out of how many? Still waiting for mine.

Relax bro, you will get your invoice in the new few days

Edit: Didn't see OP has replied
« Last Edit: Mon, 10 December 2018, 17:29:35 by Darknight00z »

Offline kairuwu

  • Posts: 4
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #257 on: Mon, 10 December 2018, 18:34:04 »
What shipping service are you planning on using to send these?

Offline msvming

  • Posts: 4
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #258 on: Mon, 10 December 2018, 18:54:18 »
Form Submitted!
Im in for 90.  ;D

Offline Mcnos

  • Posts: 378
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #259 on: Mon, 10 December 2018, 19:13:34 »
What shipping service are you planning on using to send these?

It should be express shipping. Not like 3 day, but like a week from China.
A cornered fox is more dangerous than a Jackal

QXP | TGR910 | (Reserved for TGR-Jane V2) | HHKB | Duck Viper V2 | KBD67 | E6V2 | (Reserved for Sakura Kyuu) | Mech27v2 | Tada68 | KBD5 | FC660M | Fjell | FC660CClueboard | X60 WKL & HHKB | Noxary 268 | AEK64 Brown Alps | KBD8X | HHKB Tofu | DC60 | Percent Canoe | YMD96


Offline KingzandBean

  • Posts: 7
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #260 on: Mon, 10 December 2018, 19:20:28 »
I really want to make a healios x Gsus = Jesus's Sun frankenswitch but just so my keeb can rep one of my favorite books

Sent from my Nexus 5X using Tapatalk


Offline oldcat

  • Posts: 890
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #261 on: Mon, 10 December 2018, 19:39:44 »
I really want to make a healios x Gsus = Jesus's Sun frankenswitch but just so my keeb can rep one of my favorite books

Sent from my Nexus 5X using Tapatalk

I did try Tealio stem + panda casing. its interesting
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline JubJubCity

  • Posts: 281
  • Location: Bay Area
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #262 on: Mon, 10 December 2018, 20:57:45 »
invoice paid, can't wait to try these out

Offline funderburker

  • Posts: 924
  • Location: Latvia, Riga
    • LAGOM
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #263 on: Tue, 11 December 2018, 01:49:56 »
I really want to make a healios x Gsus = Jesus's Sun frankenswitch but just so my keeb can rep one of my favorite books

Sent from my Nexus 5X using Tapatalk

I did try Tealio stem + panda casing. its interesting

Interesting in a good way? I've heard Pandas in their stock form was hella scratchy.
Proto TMO50 | Barebones HHKB GH60 | Ducky Mini | 2x TMO50 FE (soon) | 🐸 (soon)

Offline Regret

  • Posts: 18
  • Location: Boundary of the Tech Bubble
  • I regret nothing
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #264 on: Tue, 11 December 2018, 04:14:20 »
Hello, I pulled out from the order earlier but I rejoined yesterday. Just letting you know in case invoices have been or are in the process of being sent. Thanks!
Silver & Brass No.1/65 | Holy Gsus | GMK WoB // Sage M60-A | C3 Tangerines |GMK Coniferous // Gold M65-A | Tealios | ePBT 9009 // Fox Orange75 | 67g Zeal Zilents | Dev/TTY/ MT3 // Unigo66 | 62g V2 Zealios | Pending

Online up-in

  • Posts: 18
  • Location: DE
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #265 on: Tue, 11 December 2018, 04:18:01 »
Hey guys, iím interested to buy some and going to add halo stem into it, but i have a question. I also want to lube the switches to reduce the sound, do you guys know which lube to use that good enough for these and easy to get in Europe?

Offline stoic-lemon

  • Posts: 915
  • Location: Saitama, Japan
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #266 on: Tue, 11 December 2018, 06:47:42 »
I think a few people may be rejoining. This rollercoaster ride isn't over yet.

Offline Solotov

  • Posts: 87
  • Location: Los Angeles
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #267 on: Tue, 11 December 2018, 06:53:22 »
Hey guys, iím interested to buy some and going to add halo stem into it, but i have a question. I also want to lube the switches to reduce the sound, do you guys know which lube to use that good enough for these and easy to get in Europe?

I lubed my original holy panda with Tribosys 3203, and I didn't lube on the leg parts. IMO, lubing doesn't reduce the sound much, and actually it reduces the tactile of holy panda to a degree, which I prefer it unlubed. But the springs do have ping sound, so it's a benefit to lube the spring. That is for original holy panda though. The gsus has a different spring, so things maybe different. Also, people may have different opinions based on their tastes.  :thumb:
M65-A Lunar + Red Samuraii | Zephyr + Nautilus | M60-A Sage + Serika | HHKB2 | LZ-MP + WOB

Online spooknik

  • Posts: 44
  • Location: Denmark
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #268 on: Tue, 11 December 2018, 07:43:42 »
Hey guys, iím interested to buy some and going to add halo stem into it, but i have a question. I also want to lube the switches to reduce the sound, do you guys know which lube to use that good enough for these and easy to get in Europe?

Mykeyboard usually stocks from Tribosys 3204. They seems to be sold out at the moment. I assume they'll get more in eventually.

Online up-in

  • Posts: 18
  • Location: DE
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #269 on: Tue, 11 December 2018, 09:07:06 »
Mykeyboard usually stocks from Tribosys 3204. They seems to be sold out at the moment. I assume they'll get more in eventually.

I lubed my original holy panda with Tribosys 3203, and I didn't lube on the leg parts. IMO, lubing doesn't reduce the sound much, and actually it reduces the tactile of holy panda to a degree, which I prefer it unlubed. But the springs do have ping sound, so it's a benefit to lube the spring. That is for original holy panda though. The gsus has a different spring, so things maybe different. Also, people may have different opinions based on their tastes.  :thumb:



thanks for the responses, i'm going to try without lube first and hope mykeyboard eu restock the lube.




Offline oldcat

  • Posts: 890
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #270 on: Tue, 11 December 2018, 09:44:13 »
Mykeyboard usually stocks from Tribosys 3204. They seems to be sold out at the moment. I assume they'll get more in eventually.

I lubed my original holy panda with Tribosys 3203, and I didn't lube on the leg parts. IMO, lubing doesn't reduce the sound much, and actually it reduces the tactile of holy panda to a degree, which I prefer it unlubed. But the springs do have ping sound, so it's a benefit to lube the spring. That is for original holy panda though. The gsus has a different spring, so things maybe different. Also, people may have different opinions based on their tastes.  :thumb:



thanks for the responses, i'm going to try without lube first and hope mykeyboard eu restock the lube.

Try 65g sprit spring, itís very good on HP
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Online ian13

  • Posts: 51
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #271 on: Tue, 11 December 2018, 10:09:44 »
Has anyone tried zilent stems on panda housing?

And man, that tealio stem on panda housing sounds interesting. Does it make the sound "more appealing" (i.e. deeper, lesser clack, plasticky sound) than stock tealio housing?

Offline oldcat

  • Posts: 890
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #272 on: Tue, 11 December 2018, 12:39:17 »
Has anyone tried zilent stems on panda housing?

And man, that tealio stem on panda housing sounds interesting. Does it make the sound "more appealing" (i.e. deeper, lesser clack, plasticky sound) than stock tealio housing?

Tealio stem is shorter than halo I believe, so doesnt really have any sound in the downstroke (unless you smash it)
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Offline mrpetrov

  • Posts: 145
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #273 on: Tue, 11 December 2018, 14:09:51 »
I haven't received an invoice yet...

Offline ttot

  • Posts: 21
  • Location: Kyiv, Ukraine
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #274 on: Tue, 11 December 2018, 14:22:18 »
I haven't received an invoice yet...

same here

Offline Vermilionone

  • Posts: 10
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #275 on: Tue, 11 December 2018, 15:01:14 »
I'm not sure if I was supposed to alert SuperVan separately. I am also waiting for an invoice.

Thank you!

Offline SuperVan

  • Thread Starter
  • Posts: 113
  • Location: SPB
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #276 on: Tue, 11 December 2018, 15:39:57 »
I haven't received an invoice yet...

same here
I'm not sure if I was supposed to alert SuperVan separately. I am also waiting for an invoice.

Thank you!
Thanks for your support. I need some time to send your invoices. Don't worry about your invoices.

Offline SuperVan

  • Thread Starter
  • Posts: 113
  • Location: SPB
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #277 on: Tue, 11 December 2018, 15:47:47 »
The first 110 invoices have seen sent. Feel sorry that I was busy in the past few days, I will finish sending out your invoices asap.

Offline Aox

  • Posts: 59
  • Location: Irvine, CA
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #278 on: Tue, 11 December 2018, 17:02:42 »
Well well well... 60 cents per...  I suppose I'm in for 70 then, I have some halos that need panda-ing.

Online trg1234

  • Posts: 25
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #279 on: Tue, 11 December 2018, 18:11:47 »
Because I'm not sure what number I am, and there could always be issues, I haven't gotten my invoice yet and I hope its not any fault on my side...

Offline CtrlAlt

  • Posts: 3
  • Location: Philippines
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #280 on: Tue, 11 December 2018, 21:11:56 »
Hoping to get the invoice soon. Looking at 100 here. :D

Offline JubJubCity

  • Posts: 281
  • Location: Bay Area
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #281 on: Tue, 11 December 2018, 21:59:15 »
Can't wait just ordered some more halo's from massdrop

Offline oldcat

  • Posts: 890
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #282 on: Tue, 11 December 2018, 22:00:34 »
Can't wait just ordered some more halo's from massdrop

I just ordered 220 more halo trues haha
$ Instagram: https://www.instagram.com/oldcat87/
$ ALF Studio Discord: https://discord.gg/NHYnp8g
$ Gray Studio Discord: https://discord.gg/s99eys2

Online nulltorious

  • Posts: 35
  • Location: Bangkok
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #283 on: Tue, 11 December 2018, 22:09:55 »
Can't wait just ordered some more halo's from massdrop

I just ordered 220 more halo trues haha

I'm in for 110 more as well since the recent halo drop. Please invoice soon for GSUS!

Offline JubJubCity

  • Posts: 281
  • Location: Bay Area
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #284 on: Tue, 11 December 2018, 22:16:15 »
Can't wait just ordered some more halo's from massdrop

I just ordered 220 more halo trues haha
Lol no need to wait till May to have some panda's

Offline Keebmeupscotty

  • Posts: 31
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #285 on: Wed, 12 December 2018, 00:41:06 »
Invoice paid for 75. I feel like the shipping was a bit rough, but I can see you wanting to average it out across all orders and that some might cost more than others. Regardless, thx for giving my holy chickies the opportunity to mature into holy GSUSes :-)

Offline SuperVan

  • Thread Starter
  • Posts: 113
  • Location: SPB
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #286 on: Wed, 12 December 2018, 02:35:22 »
Invoice paid for 75. I feel like the shipping was a bit rough, but I can see you wanting to average it out across all orders and that some might cost more than others. Regardless, thx for giving my holy chickies the opportunity to mature into holy GSUSes :-)
Thanks for your understanding. :)

Offline firezlife

  • Posts: 25
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #287 on: Wed, 12 December 2018, 06:55:21 »
Hope I get invoice soon as well.  Be nice to get before Xmas :D

Offline mikenogo

  • Posts: 83
  • Location: Canada, ON
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #288 on: Wed, 12 December 2018, 09:43:51 »
I haven't received my invoice yet, perhaps could you double check for me?

Offline Kurisu666

  • Posts: 11
  • Location: NY
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #289 on: Wed, 12 December 2018, 15:24:47 »
Just got my invoice. Thank you @supervan ! MD having a last minute Halo drop definitely gave this GB a second second wind because now we don't have to wait for May for the MD versions. I'll be getting both and I'll save my strange feelings about all this Holy Panda drama for after I've got these in hand.

At the end of the day whatever story doesn't matter. The fact that good switches are out in the wild is good for everyone. And so far no one's been scammed so no harm no foul. Live and let live.

Offline rondg

  • Posts: 135
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #290 on: Wed, 12 December 2018, 16:02:10 »
Hoping to get my invoice. Any minute now...  :))

Offline donkey

  • Posts: 40
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #291 on: Wed, 12 December 2018, 16:18:52 »
I edited my order several times. Hope that didn't look too confusing on the processing side.
Anyway, looking forward to my invoice under reddit account 'donpark' for 200 soon.
- Don

Offline SuperVan

  • Thread Starter
  • Posts: 113
  • Location: SPB
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #292 on: Wed, 12 December 2018, 16:22:34 »
The first 200 invoices have been sent.  :)

Offline Mcnos

  • Posts: 378
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #293 on: Wed, 12 December 2018, 18:16:43 »
I still haven't received mine. :(
A cornered fox is more dangerous than a Jackal

QXP | TGR910 | (Reserved for TGR-Jane V2) | HHKB | Duck Viper V2 | KBD67 | E6V2 | (Reserved for Sakura Kyuu) | Mech27v2 | Tada68 | KBD5 | FC660M | Fjell | FC660CClueboard | X60 WKL & HHKB | Noxary 268 | AEK64 Brown Alps | KBD8X | HHKB Tofu | DC60 | Percent Canoe | YMD96


Offline portbaron

  • Posts: 249
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #294 on: Wed, 12 December 2018, 22:24:21 »
Waiting for invoice.
  | LIVING THE 1800 LIFE |


Offline Ashardalon

  • Posts: 72
  • Location: Victoria, Canada
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #296 on: Wed, 12 December 2018, 23:13:20 »
Invoice has been paid, hope to get them before Christmas!
RAMA KOYU (Haze) - Unbuilt | aanzee (PC) - Unbuilt | Tofu65 w/ Silent Reds | FC980C - heavily modded | FC660M & FC210TP - Blacks

Offline coffeeshopcoder

  • Posts: 205
  • Location: California
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #297 on: Wed, 12 December 2018, 23:22:47 »
still waiting for my invoice like everyone I guess !

Online RamenTechMech

  • Posts: 43
  • Location: United States
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #298 on: Wed, 12 December 2018, 23:26:25 »
Don't worry, we have till the 19th. As long we get them  ;D

Offline ilouis_07

  • Posts: 445
  • Location: Singapore
  • 不忘初心
Re: [GB]GSUS (New Panda) Linear Switch (price reduced to $0.6)
« Reply #299 on: Thu, 13 December 2018, 09:44:14 »
I still haven't received mine. :(
Me too:(