Author Topic: [GB] Fox Lab - Leaf 60  (Read 59397 times)

rope, boog, PvtSkittles, ballinboyz and 1 Guest are viewing this topic.

Online boog

  • Posts: 19
Re: [GB] Fox Lab - Leaf 60
« Reply #800 on: Fri, 17 May 2019, 18:42:59 »
Finally got around to unboxing this thing. Mine came with a few blemishes I'll need to contact Senter about, but overall, it's a really nice board. The brass plate and weight really make this feel super solid.

Show Image


Show Image


Show Image


Show Image


Does anyone else have these weird circle marks on the leaf?

Show Image


Yeah, I have these marks and the light scratch marks under the weight on the back

Online nephlock

  • Posts: 139
  • Location: Utah
Re: [GB] Fox Lab - Leaf 60
« Reply #801 on: Fri, 17 May 2019, 23:17:15 »
Finally got around to unboxing this thing. Mine came with a few blemishes I'll need to contact Senter about, but overall, it's a really nice board. The brass plate and weight really make this feel super solid.

Show Image


Show Image


Show Image


Show Image


Does anyone else have these weird circle marks on the leaf?

Show Image


Yeah, I have these marks and the light scratch marks under the weight on the back

Mine as well. Seems like a pretty consistent problem, so likely something to do with the manufacturing process.

Offline ArchDill

  • * Esteemed Elder
  • Posts: 1159
  • Location: OK
Re: [GB] Fox Lab - Leaf 60
« Reply #802 on: Sat, 18 May 2019, 00:04:43 »

Offline LuiKang

  • Posts: 24
Re: [GB] Fox Lab - Leaf 60
« Reply #803 on: Sat, 18 May 2019, 00:22:21 »
Good to see a PC typing test. Thanks!

Here I have another typing test, this time with SA PBT keycaps.

Re: [GB] Fox Lab - Leaf 60
« Reply #804 on: Sat, 18 May 2019, 10:22:15 »
I sold my PC board, really wish I went for an e-white. Next time, hopefully!
E6-V2 [Tealios] | RAMA M60-A [Zealios] | Duck Sidewinder [Zilents]

Offline thatsadmummy

  • Posts: 11
Re: [GB] Fox Lab - Leaf 60
« Reply #805 on: Sat, 18 May 2019, 17:12:12 »
Potato photo but I love this board.  Red samurai + Jamon bacon cap  :)

Offline thearctican

  • Posts: 122
  • Location: Philadelphia, PA
Re: [GB] Fox Lab - Leaf 60
« Reply #806 on: Sat, 18 May 2019, 17:30:13 »
Got it put together! Does anyone know if there is a reset built into the default keymap, or has my eagerness screwed me to take it apart again?

Sent from my Pixel 2 using Tapatalk


Offline etong415

  • Posts: 57
Re: [GB] Fox Lab - Leaf 60
« Reply #807 on: Sat, 18 May 2019, 17:35:12 »
Got it put together! Does anyone know if there is a reset built into the default keymap, or has my eagerness screwed me to take it apart again?
Show Image


Sent from my Pixel 2 using Tapatalk
When program it, you can set one key on a separate layer to be the reset button.


Sent from my iPhone using Tapatalk

Online PvtSkittles

  • Posts: 12
Re: [GB] Fox Lab - Leaf 60
« Reply #808 on: Sat, 18 May 2019, 17:43:56 »
Got it put together! Does anyone know if there is a reset built into the default keymap, or has my eagerness screwed me to take it apart again?
Show Image


Sent from my Pixel 2 using Tapatalk

Well I was going to say the reset is Fn+Esc but I think the default Fn key is where RWin should be and you're on a winkeyless build... At least it was for me on the hotswap PCB. Not sure if there's another Fn key mapped somewhere.

Offline laserbeamspewpew

  • Posts: 122
  • Location: Brooklyn
Re: [GB] Fox Lab - Leaf 60
« Reply #809 on: Sat, 18 May 2019, 17:47:57 »
Got it put together! Does anyone know if there is a reset built into the default keymap, or has my eagerness screwed me to take it apart again?
Show Image


Sent from my Pixel 2 using Tapatalk

Well I was going to say the reset is Fn+Esc but I think the default Fn key is where RWin should be and you're on a winkeyless build... At least it was for me on the hotswap PCB. Not sure if there's another Fn key mapped somewhere.

Try R. Alt + Esc.

Offline Nostril

  • Posts: 37
  • Location: Los Angeles, California, USA
Re: [GB] Fox Lab - Leaf 60
« Reply #810 on: Sat, 18 May 2019, 17:56:00 »
Got it put together! Does anyone know if there is a reset built into the default keymap, or has my eagerness screwed me to take it apart again?
Show Image


Sent from my Pixel 2 using Tapatalk

Try these methods in the "Put your keyboard into DFU mode" section.

https://beta.docs.qmk.fm/newbs/newbs_flashing

The space+b and unplug method worked for me.

Offline thearctican

  • Posts: 122
  • Location: Philadelphia, PA
Re: [GB] Fox Lab - Leaf 60
« Reply #811 on: Sat, 18 May 2019, 18:07:10 »
Got it put together! Does anyone know if there is a reset built into the default keymap, or has my eagerness screwed me to take it apart again?
Show Image


Sent from my Pixel 2 using Tapatalk

Try these methods in the "Put your keyboard into DFU mode" section.

https://beta.docs.qmk.fm/newbs/newbs_flashing

The space+b and unplug method worked for me.
That's what I needed. Fingers crossed they included bootmagic in the default build.

Sent from my Pixel 2 using Tapatalk


Offline Furikurichemy

  • Posts: 98
Re: [GB] Fox Lab - Leaf 60
« Reply #812 on: Sat, 18 May 2019, 19:23:59 »
Got it put together! Does anyone know if there is a reset built into the default keymap, or has my eagerness screwed me to take it apart again?
Show Image


Sent from my Pixel 2 using Tapatalk

Try these methods in the "Put your keyboard into DFU mode" section.

https://beta.docs.qmk.fm/newbs/newbs_flashing

The space+b and unplug method worked for me.
That's what I needed. Fingers crossed they included bootmagic in the default build.

Sent from my Pixel 2 using Tapatalk

Fn + escape will work too.

Offline finalarcadia

  • Posts: 200
Re: [GB] Fox Lab - Leaf 60
« Reply #813 on: Sat, 18 May 2019, 19:33:49 »
Can confirm space+b when plugging in works for the hotswap PCB for DFU mode.

Anyone know if these LEDs are RGB? if so, how to use that functionality in QMK (through code)?

Offline thearctican

  • Posts: 122
  • Location: Philadelphia, PA
Re: [GB] Fox Lab - Leaf 60
« Reply #814 on: Sat, 18 May 2019, 19:51:19 »
Can confirm space+b when plugging in works for the hotswap PCB for DFU mode.

Anyone know if these LEDs are RGB? if so, how to use that functionality in QMK (through code)?
Just by looking at it they appeared to be two pin SMD LEDs. One color.

Sent from my Pixel 2 using Tapatalk


Offline finalarcadia

  • Posts: 200
Re: [GB] Fox Lab - Leaf 60
« Reply #815 on: Sat, 18 May 2019, 19:53:38 »

Offline spyruf

  • Posts: 77
  • Location: USA
Re: [GB] Fox Lab - Leaf 60
« Reply #816 on: Sun, 19 May 2019, 00:38:39 »
Got it put together! Does anyone know if there is a reset built into the default keymap, or has my eagerness screwed me to take it apart again?
Show Image


Sent from my Pixel 2 using Tapatalk

Try these methods in the "Put your keyboard into DFU mode" section.

https://beta.docs.qmk.fm/newbs/newbs_flashing

The space+b and unplug method worked for me.
I tried all of these do you know if there are any other methods?

I flashed a keymap without a reset key and now I can't seem to figure out how to the pcb back in DFU mode.

Offline LuiKang

  • Posts: 24
Re: [GB] Fox Lab - Leaf 60
« Reply #817 on: Sun, 19 May 2019, 00:52:46 »
Got it put together! Does anyone know if there is a reset built into the default keymap, or has my eagerness screwed me to take it apart again?
Show Image


Sent from my Pixel 2 using Tapatalk

Try these methods in the "Put your keyboard into DFU mode" section.

https://beta.docs.qmk.fm/newbs/newbs_flashing

The space+b and unplug method worked for me.
I tried all of these do you know if there are any other methods?

I flashed a keymap without a reset key and now I can't seem to figure out how to the pcb back in DFU mode.
Fn + Esc while the keyboard is plugged.

Offline spyruf

  • Posts: 77
  • Location: USA
Re: [GB] Fox Lab - Leaf 60
« Reply #818 on: Sun, 19 May 2019, 00:59:50 »

Fn + Esc while the keyboard is plugged.

Afaik that only works because the default key map has a reset key on layer 1. The key map I flashed doesn’t have that unfortunately.
My question is if there are any other key combos to reset or will I have to short certain pins on the pcb? 

Online senter

  • * Maker
  • Thread Starter
  • Posts: 660
  • Location: Shenzhen, China or Washington, D.C.
Re: [GB] Fox Lab - Leaf 60
« Reply #819 on: Sun, 19 May 2019, 01:11:14 »

Fn + Esc while the keyboard is plugged.

Afaik that only works because the default key map has a reset key on layer 1. The key map I flashed doesn’t have that unfortunately.
My question is if there are any other key combos to reset or will I have to short certain pins on the pcb?

Yes.
There are no physical reset buttons on the PCB but you can contact the RE pin with the GND on the PCB. There are two RE pins near the MCU. Either one should work.

Online nephlock

  • Posts: 139
  • Location: Utah
Re: [GB] Fox Lab - Leaf 60
« Reply #820 on: Sun, 19 May 2019, 02:30:31 »

Fn + Esc while the keyboard is plugged.

Afaik that only works because the default key map has a reset key on layer 1. The key map I flashed doesn’t have that unfortunately.
My question is if there are any other key combos to reset or will I have to short certain pins on the pcb?

Hold spacebar + B while plugging the board in, should work

Offline yemeisong

  • Posts: 16
Re: [GB] Fox Lab - Leaf 60
« Reply #821 on: Sun, 19 May 2019, 04:56:26 »
has anyone tried to add underglow strips?

Offline spyruf

  • Posts: 77
  • Location: USA
Re: [GB] Fox Lab - Leaf 60
« Reply #822 on: Sun, 19 May 2019, 09:10:23 »

Fn + Esc while the keyboard is plugged.

Afaik that only works because the default key map has a reset key on layer 1. The key map I flashed doesn’t have that unfortunately.
My question is if there are any other key combos to reset or will I have to short certain pins on the pcb?

Thanks! That worked.

Yes.
There are no physical reset buttons on the PCB but you can contact the RE pin with the GND on the PCB. There are two RE pins near the MCU. Either one should work.

Offline thearctican

  • Posts: 122
  • Location: Philadelphia, PA
Re: [GB] Fox Lab - Leaf 60
« Reply #823 on: Sun, 19 May 2019, 09:52:02 »

Fn + Esc while the keyboard is plugged.

Afaik that only works because the default key map has a reset key on layer 1. The key map I flashed doesn’t have that unfortunately.
My question is if there are any other key combos to reset or will I have to short certain pins on the pcb?

Yes.
There are no physical reset buttons on the PCB but you can contact the RE pin with the GND on the PCB. There are two RE pins near the MCU. Either one should work.
Bootmagic space+B worked for me. Thanks for confirming no reset button Senter.

Also, the LEDs are indeed white single color for those asking.

Sent from my Pixel 2 using Tapatalk


Offline ArchDill

  • * Esteemed Elder
  • Posts: 1159
  • Location: OK
Re: [GB] Fox Lab - Leaf 60
« Reply #824 on: Sun, 19 May 2019, 11:16:47 »
These are the pins that you can jump to reset the board.

The far right RE (both pins) and the G on the VOG. Use tweezers or paper clips. When it is plugged into QMK, jump before you flash and it should work.



219662-0

Offline spyruf

  • Posts: 77
  • Location: USA
Re: [GB] Fox Lab - Leaf 60
« Reply #825 on: Sun, 19 May 2019, 12:57:39 »
These are the pins that you can jump to reset the board.

The far right RE (both pins) and the G on the VOG. Use tweezers or paper clips. When it is plugged into QMK, jump before you flash and it should work.



(Attachment Link)


Yes.
There are no physical reset buttons on the PCB but you can contact the RE pin with the GND on the PCB. There are two RE pins near the MCU. Either one should work.
Thanks guys, got it working a couple hours ago.

Offline Lormania

  • Posts: 164
  • Location: Denver
Re: [GB] Fox Lab - Leaf 60
« Reply #826 on: Sun, 19 May 2019, 15:42:48 »
Has anyone found the same sized bumpons but clear online anywhere?

Offline spyruf

  • Posts: 77
  • Location: USA
Re: [GB] Fox Lab - Leaf 60
« Reply #827 on: Sun, 19 May 2019, 16:58:49 »



Leaf 80, Holy Chickies, XDA Oblique (waiting for GMK Minimal)
Leaf 60, Orange Alps, Japan AEK Keycaps
Leaf 60, Gateron Linjar, GMK 9009
« Last Edit: Sun, 19 May 2019, 17:00:38 by spyruf »

Offline merlin64

  • Posts: 1174
  • Location: Seattle, WA
    • MechMerlin
Re: [GB] Fox Lab - Leaf 60
« Reply #828 on: Sun, 19 May 2019, 17:05:44 »
@thearctican @ArchDill I have implemented Bootmagic Lite, so the escape key will work as a reset while you're plugging in.

Offline cijanzen

  • Posts: 320
Re: [GB] Fox Lab - Leaf 60
« Reply #829 on: Sun, 19 May 2019, 17:10:45 »
Show Image

Show Image

Show Image

Leaf 80, Holy Chickies, XDA Oblique (waiting for GMK Minimal)
Leaf 60, Orange Alps, Japan AEK Keycaps
Leaf 60, Gateron Linjar, GMK 9009

I really like the shared design language through this series. Can’t wait for the Leaf Numpad!

Online boog

  • Posts: 19
Re: [GB] Fox Lab - Leaf 60
« Reply #830 on: Sun, 19 May 2019, 19:47:23 »
Has anyone found the same sized bumpons but clear online anywhere?

I found these. I think they may be slightly smaller than the ones that came with the board, but I won’t know how well it works until it arrives (4 days from now).
3M Bumpon SJ5306 Clear Bumper/Spacer Pad - Hemispherical Shaped Bumper - 0.375 in Width x 0.15 in Height - 67560 [PRICE is per PAD] https://www.amazon.com/dp/B0080HNTH6/ref=cm_sw_r_cp_api_i_wDF4CbBZ6E0M0

Offline ArchDill

  • * Esteemed Elder
  • Posts: 1159
  • Location: OK
Re: [GB] Fox Lab - Leaf 60
« Reply #831 on: Sun, 19 May 2019, 22:01:09 »
@thearctican @ArchDill I have implemented Bootmagic Lite, so the escape key will work as a reset while you're plugging in.

Ahh nice! That will help a lot when flashing. I think on my current layout I made fn+esc my reset.

Online boog

  • Posts: 19
Re: [GB] Fox Lab - Leaf 60
« Reply #832 on: Sun, 19 May 2019, 23:34:33 »
Loving mine. I wish I would have gotten 2 cases now.  :D