Author Topic: [GB] GSKT-00 (Waiting on boards)  (Read 136632 times)

0 Members and 1 Guest are viewing this topic.

Offline weaston

  • Thread Starter
  • Posts: 114
  • Location: Florida, USA
[GB] GSKT-00 (Waiting on boards)
« on: Fri, 17 January 2020, 11:06:16 »
GSKT-00

The first in the GSKT series. Gasket mounted, 6063 aluminum.



Information and Updates

CHECK ORDER HERE: https://docs.google.com/spreadsheets/d/e/2PACX-1vQMHo2QqRLlHx63qiji9BAJ_hCQ99DZ18Yz0rWARaZU7BEm1prhhhWArGpeGd2hQhtdz0dJ-jkFGhZz/pubhtml?gid=0&single=true

Information about changes on Page 13


Thank you all for the interest in the GSKT-00.  Supplemental information from the GB will not be repeated here, so please see the Interest Check thread for more in-depth information.

Some options are still being decided on privately (pcb colors, alps plate layouts) but the practice form will have the most up to date options when it is released.  Be prepared for a long form because of all the options.

The GB will open on January 20th.  I am in the US-EST time zone and I am shooting for the form to open sometime in the late afternoon or early evening.  This should give most of the US a good chance for it and the people in Europe and Asia shouldn't have to stray too far outside their schedules either.  I will update with the official time on Monday morning.

Opening at 5pm EST.

One more thing is I had to raise the international shipping price to $50 after checking a lot of estimates, hopefully this isn't too much of a deterrent.  Only $5 but worth mentioning.  2 units will also be an additional $15 charge regardless of location.

Practice Form: CLOSED

Official Form, opens 1/22 at 5pm EST: CLOSED

Timeline

For 200 boards and plates it is looking like up to 90ish business days of manufacturing time.  Can't really get this lower, so it will be a bit of a wait, but that's to be expected at that high of a unit count and with all the plates.  If for whatever reason we don't hit the maximum then it will of course take less time.  PCB turnaround should be some time less than the boards and gaskets and screws are a trivial amount of time to acquire so no worries there.  Again cerakoting will add another 3-4 weeks of time (potentially longer depending on how many people want it) so be prepared for that as well.  But that will only affect those who are getting a board koted.

As far as what to expect out of me for updates, I will not update with any information unless something is happening.  Meaning when boards ship to me, pcbs ship, we get components, etc then there will be an update.  Otherwise, I will not have anything to say.  Having weekly updates that are nothing more than me saying "still waiting" are not useful and will be forgone.

Form Submission and Invoicing

Please take your time to fill out the form carefully and accurately.  For such a large potential unit count I do not have the time or patience to edit/change much (if any) information filled incorrectly.  I would appreciate if you make sure the information you submit is accurate and complete so it saves me time in getting orders to the factory and to you as quick as I can.  If you fill out the form really quickly without the right info just to get a spot, then try to have me change it all after the fact, then I will cancel your order.  If it's a small thing we'll make it work, but please try to submit it right the first time.  Please help me make this as smooth as possible and get these boards to you all with as little headache as possible. Thank you.

The form will stay open as long as the maximum has not been hit.  If we don't have the maximum in 2 weeks time then it will be closed and run with the amount received.


Invoices will be sent as I create them so expect a week or so of me sending invoices out.  Invoices should be paid as quickly as possible, the sooner everyone submits, the sooner we can send an order to the factory.  You will have 2 weeks to pay from the time you receive your invoice.  If you have not paid by then, your spot will be passed to the next person in line and so on. 

Submission to the factory will not happen until all orders are paid for.

There are no refunds of any kind.  Once you have paid the money, you will not be getting it back unless there is some failure on my end at which point probably everyone would be refunded, but that is an absolute worst case scenario.  Worth mentioning in the spirit of Caveat Emptor.

Pricing

- Case: $225

- Plate: $25 Half - $30 Full

  - Materials: Aluminum (Silver, Gray, Black, Red), Stainless Steel (Brushed), POM (black transparent, expect potential slight warping and/or very small misalignment), Acrylic (Clear), Polycarbonate (Frosted)

- PCB: $25

- Shipping: $25 CONUS - $50 International

- Cerakote (any non-custom color): $50


A final thank you to all the friends who have used this board and those who have expressed interest in it.  You are appreciated.  :thumb:
« Last Edit: Thu, 29 October 2020, 21:50:00 by weaston »
DK Saver | Kingsaver | OTD 360 Corsa | OTD 456GT | OTD Cheat | KMAC 1.3 | KMAC 1.2 | KMAC Happy | KMAC Pad | KMAC Mini (Revo) | Singa | HHKB Pro 1 | GSKT-00 | IBM 5251 | IBM Model F XT | IBM Model M | Dolch PAC | Kinesis Advantage

Offline Signature

  • master of puppers
  • * Moderator
  • Posts: 1722
  • Location: Sweden
  • snoozing
Re: [GB] - GSKT-00
« Reply #1 on: Fri, 17 January 2020, 11:25:16 »
Approved! Please add an estimated shipping date (can be very rough).

GL w GB :)
If you need any GB or classifieds post approved send me a PM here or on Discord Gus#1121

Offline Fnzzy

  • Posts: 651
  • Location: Germany
Re: [GB] - GSKT-00
« Reply #2 on: Fri, 17 January 2020, 11:32:25 »
very nice
Duck Viper | LZ CLS | J80 | Key65 | GSKT-00 | ElectroType 87 | Keycult No.1 Rev.2 | Matrix 2.0 Add | Lin Whale (Anniversary) | Realforce R2

Offline zian_

  • Posts: 46
  • Location: United States
  • Skinny Legs
Re: [GB] - GSKT-00
« Reply #3 on: Fri, 17 January 2020, 11:38:11 »
Fingers crossed.

Offline CarterH

  • Posts: 10
Re: [GB] - GSKT-00
« Reply #4 on: Fri, 17 January 2020, 11:45:42 »
nice

Offline Nigolski

  • Posts: 178
  • Location: Helsinki
Re: [GB] - GSKT-00
« Reply #5 on: Fri, 17 January 2020, 11:52:05 »
very secksi
OTD 356CL

Offline Storm-

  • Posts: 14
Re: [GB] - GSKT-00
« Reply #6 on: Fri, 17 January 2020, 11:56:24 »
I'm ready
TGR Jane V2 CE | TGR Alice | Unikorn

Offline KingOfMemes

  • Posts: 797
  • Location: Murica, the best country in the world
Re: [GB] - GSKT-00
« Reply #7 on: Fri, 17 January 2020, 11:58:56 »
200 units. My chances are better than I thought they would be

Offline txclack

  • Posts: 223
  • Location: Texas
Re: [GB] - GSKT-00
« Reply #8 on: Fri, 17 January 2020, 12:11:17 »
GL to everyone who decides to enter.  Anyone thinking of going with the cerakote option?  I'm thinking SOCOM Blue  :eek:  :thumb:

Thanks again, Weaston

Offline Tyler

  • Posts: 21
  • hhkb >
Re: [GB] - GSKT-00
« Reply #9 on: Fri, 17 January 2020, 12:12:38 »
Oh yeah.. The hype begins.

Offline BIG_BUCKNUT

  • Posts: 13
Re: [GB] - GSKT-00
« Reply #10 on: Fri, 17 January 2020, 12:17:46 »
200 units. My chances are better than I thought they would be

Yeah I'm afraid this one will be gone super quick especially if we're allowed to order two cases. I can see a lot of people trying to flip a second one on mech market.

Offline tex_live_utility

  • Posts: 924
  • MX brown apologist
    • twitch.tv/salt_rock_lamp
Re: [GB] - GSKT-00
« Reply #11 on: Fri, 17 January 2020, 12:19:53 »
200 units. My chances are better than I thought they would be

Yeah I'm afraid this one will be gone super quick especially if we're allowed to order two cases. I can see a lot of people trying to flip a second one on mech market.

If the GB lasts more than 45 seconds I will be very surprised.
Discord: salt rock lamp#0679 | Reddit: /u/nerdponx | Deskthority: autoload -Uz | Keebtalk: salt_rock_lamp
Twitch: salt_rock_lamp | YouTube: https://www.youtube.com/channel/UCd7YXZjilUutJ6ShZWrvQtg | Instagram: @salt_rock_keyboards


Offline Ryanticz

  • Posts: 26
Re: [GB] - GSKT-00
« Reply #12 on: Fri, 17 January 2020, 12:21:17 »
200 units. My chances are better than I thought they would be

Yeah I'm afraid this one will be gone super quick especially if we're allowed to order two cases. I can see a lot of people trying to flip a second one on mech market.

If the GB lasts more than 45 seconds I will be very surprised.

I feel not being able to edit may give some people a tiny bit more time, so that's something atleast

Offline eniigma

  • Posts: 557
  • Location: USA
    • Storefront:
Re: [GB] GSKT-00
« Reply #13 on: Fri, 17 January 2020, 12:45:26 »
it's finally happening! best of luck with GB!


Offline Shadohhh

  • Posts: 49
  • Location: Florida
Re: [GB] GSKT-00
« Reply #14 on: Fri, 17 January 2020, 12:46:26 »
It's happening. Good luck to those entering.

Offline bthezebra

  • Posts: 443
Re: [GB] GSKT-00
« Reply #15 on: Fri, 17 January 2020, 12:47:35 »
May my fingers key true!

Offline Fnzzy

  • Posts: 651
  • Location: Germany
Re: [GB] - GSKT-00
« Reply #16 on: Fri, 17 January 2020, 12:48:47 »
GL to everyone who decides to enter.  Anyone thinking of going with the cerakote option?  I'm thinking SOCOM Blue  :eek:  :thumb:

Thanks again, Weaston

I think I am going with Light Sand H-142Q, NK Creams and OG Beige. Seen a couple of sand coloured keyboards lately and I like it.
Duck Viper | LZ CLS | J80 | Key65 | GSKT-00 | ElectroType 87 | Keycult No.1 Rev.2 | Matrix 2.0 Add | Lin Whale (Anniversary) | Realforce R2

Offline KingOfMemes

  • Posts: 797
  • Location: Murica, the best country in the world
Re: [GB] - GSKT-00
« Reply #17 on: Fri, 17 January 2020, 12:50:20 »
200 units. My chances are better than I thought they would be

Yeah I'm afraid this one will be gone super quick especially if we're allowed to order two cases. I can see a lot of people trying to flip a second one on mech market.
Yeah I'm going for two, but not for flipping. Trying to get my pops a nice keeb

Offline o3okevin

  • Posts: 283
  • Location: Canada
Re: [GB] GSKT-00
« Reply #18 on: Fri, 17 January 2020, 13:00:19 »
Hype!!

Offline cdhoffmann

  • Posts: 75
Re: [GB] GSKT-00
« Reply #19 on: Fri, 17 January 2020, 13:04:37 »
May my form filling be true 🙏

Offline weaston

  • Thread Starter
  • Posts: 114
  • Location: Florida, USA
Re: [GB] - GSKT-00
« Reply #20 on: Fri, 17 January 2020, 13:05:35 »
GL to everyone who decides to enter.  Anyone thinking of going with the cerakote option?  I'm thinking SOCOM Blue  :eek:  :thumb:

Thanks again, Weaston

I think I am going with Light Sand H-142Q, NK Creams and OG Beige. Seen a couple of sand coloured keyboards lately and I like it.

In the Cerakote example album in the IC thread, the light beige color swatch I have is actually koted in Light Sand  :thumb:

I like it better than Benelli Sand personally.
DK Saver | Kingsaver | OTD 360 Corsa | OTD 456GT | OTD Cheat | KMAC 1.3 | KMAC 1.2 | KMAC Happy | KMAC Pad | KMAC Mini (Revo) | Singa | HHKB Pro 1 | GSKT-00 | IBM 5251 | IBM Model F XT | IBM Model M | Dolch PAC | Kinesis Advantage

Offline Zeelobby

  • Posts: 736
Re: [GB] GSKT-00
« Reply #21 on: Fri, 17 January 2020, 13:10:14 »
Man. I hope I get in on this.

Sent from my Pixel 3 XL using Tapatalk


Offline Fnzzy

  • Posts: 651
  • Location: Germany
Re: [GB] - GSKT-00
« Reply #22 on: Fri, 17 January 2020, 13:12:34 »
GL to everyone who decides to enter.  Anyone thinking of going with the cerakote option?  I'm thinking SOCOM Blue  :eek:  :thumb:

Thanks again, Weaston

I think I am going with Light Sand H-142Q, NK Creams and OG Beige. Seen a couple of sand coloured keyboards lately and I like it.

In the Cerakote example album in the IC thread, the light beige color swatch I have is actually koted in Light Sand  :thumb:

I like it better than Benelli Sand personally.

Oh so this is light sand?

https://i.imgur.com/XJYHp2X.jpg?1

I was looking at the user gallery over at Cerakote and there light sand always looks similar to these two
https://www.cerakote.com/gallery/detail/48630/Cerakote-two-toned-rock-island-armory-1911-handgun/
https://www.cerakote.com/gallery/detail/50859/Cerakote-h146-graphite-black-and-h142-light-sand/
Duck Viper | LZ CLS | J80 | Key65 | GSKT-00 | ElectroType 87 | Keycult No.1 Rev.2 | Matrix 2.0 Add | Lin Whale (Anniversary) | Realforce R2

Offline Norato

  • Posts: 9
Re: [GB] GSKT-00
« Reply #23 on: Fri, 17 January 2020, 13:32:05 »
Really hope this ends up being closer to early afternoon time (est), if Iím at work during the buy itís gonna be tough:(

Offline weaston

  • Thread Starter
  • Posts: 114
  • Location: Florida, USA
Re: [GB] - GSKT-00
« Reply #24 on: Fri, 17 January 2020, 13:36:59 »
Oh so this is light sand?

https://i.imgur.com/XJYHp2X.jpg?1

I was looking at the user gallery over at Cerakote and there light sand always looks similar to these two
https://www.cerakote.com/gallery/detail/48630/Cerakote-two-toned-rock-island-armory-1911-handgun/
https://www.cerakote.com/gallery/detail/50859/Cerakote-h146-graphite-black-and-h142-light-sand/

Seems I have a brain that is stupid. None of the swatches I uploaded were Light Sand 🙃

I have one somewhere, i'll see if i can find it and show something before the form opens on Monday.
DK Saver | Kingsaver | OTD 360 Corsa | OTD 456GT | OTD Cheat | KMAC 1.3 | KMAC 1.2 | KMAC Happy | KMAC Pad | KMAC Mini (Revo) | Singa | HHKB Pro 1 | GSKT-00 | IBM 5251 | IBM Model F XT | IBM Model M | Dolch PAC | Kinesis Advantage

Offline lunr

  • Posts: 208
  • Location: Canada
Re: [GB] GSKT-00
« Reply #25 on: Fri, 17 January 2020, 13:52:03 »
For the POM plate, will the warping be some what fixed when fully built? Also, what kind of misalignment?

Offline avtar

  • Posts: 496
  • Location: Toronto, Canada
Re: [GB] - GSKT-00
« Reply #26 on: Fri, 17 January 2020, 14:10:26 »
Thinking about going with this turquoise and the upcoming GMK Modern Dolch Light 🙏

GL to everyone who decides to enter.  Anyone thinking of going with the cerakote option?  I'm thinking SOCOM Blue  :eek:  :thumb:

Thanks again, Weaston

Offline SJHL

  • Posts: 273
Re: [GB] - GSKT-00
« Reply #27 on: Fri, 17 January 2020, 14:14:37 »
Robin's Egg Blue is a great color.


Offline sonicdoooom

  • Posts: 13
Re: [GB] GSKT-00
« Reply #28 on: Fri, 17 January 2020, 14:16:28 »
What payment methods will you be accepting? Paypal?

Offline weaston

  • Thread Starter
  • Posts: 114
  • Location: Florida, USA
Re: [GB] GSKT-00
« Reply #29 on: Fri, 17 January 2020, 14:22:10 »
For the POM plate, will the warping be some what fixed when fully built? Also, what kind of misalignment?

If there is any it will be very slight, such that you might need to make sure the plate is pressed a bit more flat whilr you solder. There have also been a few pom plates i've order that have a cut or two off my fractions of a mm that i had to file slightly. It's all very small problems that don't actually affect a build but just something to be aware of. I'll check they're within spec before i ship it and if i think it's enough of a problem i'll replace it and it won't matter.
What payment methods will you be accepting? Paypal?

The invoice will be generated by Shopify so whatever they support including Paypal. You will still order through the form so there's no storefront to worry about. Just using Shopify for invoicing and keeping track of things better.
DK Saver | Kingsaver | OTD 360 Corsa | OTD 456GT | OTD Cheat | KMAC 1.3 | KMAC 1.2 | KMAC Happy | KMAC Pad | KMAC Mini (Revo) | Singa | HHKB Pro 1 | GSKT-00 | IBM 5251 | IBM Model F XT | IBM Model M | Dolch PAC | Kinesis Advantage

Offline avtar

  • Posts: 496
  • Location: Toronto, Canada
Re: [GB] - GSKT-00
« Reply #30 on: Fri, 17 January 2020, 14:23:02 »
Thanks for sharing that pic! The colour seems more green than what I imagined but I still dig it :)

Robin's Egg Blue is a great color.

Offline bill_ng117

  • Posts: 16
Re: [GB] GSKT-00
« Reply #31 on: Fri, 17 January 2020, 14:27:22 »
All aboard the hype train. Good luck everyone!

Offline sonicdoooom

  • Posts: 13
Re: [GB] GSKT-00
« Reply #32 on: Fri, 17 January 2020, 14:27:48 »
So the form is just used to create an invoice, actual payment will be handled through Shopify later? Trying to figure out if Paypal credit will be an option.

Offline avtar

  • Posts: 496
  • Location: Toronto, Canada
Re: [GB] GSKT-00
« Reply #33 on: Fri, 17 January 2020, 14:38:03 »
I'm fairly sure Shopify let's you pay with credit cards and/or PayPal.

Offline iNViSiBiLiTi

  • Posts: 182
Re: [GB] GSKT-00
« Reply #34 on: Fri, 17 January 2020, 14:42:18 »
Keyboard of the Year is already here! Wow!

This board is a steal.  Cheaper than what I paid for the first run. 
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline Zeelobby

  • Posts: 736
Re: [GB] GSKT-00
« Reply #35 on: Fri, 17 January 2020, 14:51:35 »
233839-0

Stormtrooper White (H-297) | Snow White (H-136) | Light Sand (H-142) | Plumb Brown (H-298) | Graphite Black (H-146)

               Mojito (H-313) | Crushed Orchid (H-314) | Copper Suede (H-310) | Tequila Sunrise (H-309)

233841-1

233828-2

233843-3
« Last Edit: Fri, 17 January 2020, 15:10:16 by Zeelobby »

Offline bill_ng117

  • Posts: 16
Re: [GB] GSKT-00
« Reply #36 on: Fri, 17 January 2020, 14:54:56 »
Keyboard of the Year is already here! Wow!

This board is a steal.  Cheaper than what I paid for the first run.

Did you go with a full plate or half plate in the og GB may I ask? :))

Offline weaston

  • Thread Starter
  • Posts: 114
  • Location: Florida, USA
Re: [GB] GSKT-00
« Reply #37 on: Fri, 17 January 2020, 15:33:11 »

Stormtrooper White (H-297) | Snow White (H-136) | Light Sand (H-142) | Plumb Brown (H-298) | Graphite Black (H-146)

               Mojito (H-313) | Crushed Orchid (H-314) | Copper Suede (H-310) | Tequila Sunrise (H-309)

Just as a heads up, these chips are fairly inaccurate. They are made of a really cheap pliable metal and it coats and takes color fairly differently from aluminum. It is a good basis for understanding, but really only use these as a loose guide, not a 1:1 comparison.
DK Saver | Kingsaver | OTD 360 Corsa | OTD 456GT | OTD Cheat | KMAC 1.3 | KMAC 1.2 | KMAC Happy | KMAC Pad | KMAC Mini (Revo) | Singa | HHKB Pro 1 | GSKT-00 | IBM 5251 | IBM Model F XT | IBM Model M | Dolch PAC | Kinesis Advantage

Offline temp0321

  • Posts: 37
Re: [GB] GSKT-00
« Reply #38 on: Fri, 17 January 2020, 15:36:30 »
Are pcb colors dec
 Oh nvm, its being decided
« Last Edit: Fri, 17 January 2020, 15:58:57 by temp0321 »

Offline Zeelobby

  • Posts: 736
Re: [GB] GSKT-00
« Reply #39 on: Fri, 17 January 2020, 15:48:34 »

Stormtrooper White (H-297) | Snow White (H-136) | Light Sand (H-142) | Plumb Brown (H-298) | Graphite Black (H-146)

               Mojito (H-313) | Crushed Orchid (H-314) | Copper Suede (H-310) | Tequila Sunrise (H-309)

Just as a heads up, these chips are fairly inaccurate. They are made of a really cheap pliable metal and it coats and takes color fairly differently from aluminum. It is a good basis for understanding, but really only use these as a loose guide, not a 1:1 comparison.
Quite right. Your the man. Never had anything cerakoted before so I have no clue. It is nice feeling the finish though, which I imagine will be closer to the real thing even if colors aren't completely. I might go with stormtrooper white just because of the glassy smooth finish.

Sent from my Pixel 3 XL using Tapatalk

Offline skrunk

  • Posts: 43
Re: [GB] GSKT-00
« Reply #40 on: Fri, 17 January 2020, 15:54:54 »
Good timing to start the GB on a holiday. Should make it easier for a lot of people.

GL to everyone!

Offline MMKB

  • Posts: 475
  • Location: norcal
Re: [GB] GSKT-00
« Reply #41 on: Fri, 17 January 2020, 15:56:52 »
Glad to see a GB with Cerakote options. Saves me the round trip to the paint shop. I like the paint so much that I started a thread on Cerakoted keyboards: https://geekhack.org/index.php?topic=103708.0
        

Offline Zeelobby

  • Posts: 736
Re: [GB] GSKT-00
« Reply #42 on: Fri, 17 January 2020, 16:21:59 »
I wish I had off on Monday :(

Sent from my Pixel 3 XL using Tapatalk


Offline Fnzzy

  • Posts: 651
  • Location: Germany
Re: [GB] GSKT-00
« Reply #43 on: Fri, 17 January 2020, 16:24:05 »
Thanks for all the cool cerakote insight. And thanks for considering uploading the sand sample. It's such a good feeling when you know exactly what you're buying instead of guessing and hoping.
Duck Viper | LZ CLS | J80 | Key65 | GSKT-00 | ElectroType 87 | Keycult No.1 Rev.2 | Matrix 2.0 Add | Lin Whale (Anniversary) | Realforce R2

Offline KingOfMemes

  • Posts: 797
  • Location: Murica, the best country in the world
Re: [GB] GSKT-00
« Reply #44 on: Fri, 17 January 2020, 16:33:17 »
I wish I had off on Monday :(

Sent from my Pixel 3 XL using Tapatalk
Can you not try to cop at work?

Offline iNViSiBiLiTi

  • Posts: 182
Re: [GB] GSKT-00
« Reply #45 on: Fri, 17 January 2020, 16:36:44 »
Keyboard of the Year is already here! Wow!

This board is a steal.  Cheaper than what I paid for the first run.

Did you go with a full plate or half plate in the og GB may I ask? :))

I own both, which is the correct choice to make. The spacebar from the half plate is really nice. But the alphas from a full plate are also good.

The half plate really shows off the flex cut in the pcb which really offers a responsive typing experience. The full plate is a more traditional aluminum plate feel with a unique sound.
60%: Prophet, GSKT-00, Weaven

TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

Bulgogi Board (VA104M)

Offline Zeelobby

  • Posts: 736
Re: [GB] GSKT-00
« Reply #46 on: Fri, 17 January 2020, 17:07:02 »
I wish I had off on Monday :(

Sent from my Pixel 3 XL using Tapatalk
Can you not try to cop at work?
Oh don't worry. I will try. Sometimes the scheduling and meeting gods are fickle. I've def missed stuff before. Hopefully it'll be more towards 5/6 East Coast time, and I'll be done for the day. Then I just can't drive home til it starts. Lol.

Sent from my Pixel 3 XL using Tapatalk


Offline dRpkebs

  • Posts: 22
Re: [GB] GSKT-00
« Reply #47 on: Fri, 17 January 2020, 17:41:31 »
My body is ready  :p

Offline dantambok

  • Posts: 892
  • Location: Philippines
Re: [GB] GSKT-00
« Reply #48 on: Fri, 17 January 2020, 18:52:59 »
can't wait!
« Last Edit: Sun, 19 January 2020, 20:34:22 by dantambok »
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / 2x Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 2x TGRxSinga Unikorn / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / 2x FMJ80 / TGR Jane V2 CE / Matrix Project F / IDB60 / is0  / MXSS / Atom TKL / Duck Viper v3 / HBCP / Noxary 280 / LZ Physix / FLX Virgo / Modern M0110 / Matrix 2.0 ADD / TGR Police

Coming soon --   Lynx50 / Matrix 2.0 ADD / 2x GSKT-00 / Noxary Vulcan Pro / 350 mimi / Fuji 65 / Haus65 / Valhalla / Dalco Mini


Offline PikaJoyce

  • Posts: 128
Re: [GB] GSKT-00
« Reply #49 on: Fri, 17 January 2020, 21:08:42 »

Stormtrooper White (H-297) | Snow White (H-136) | Light Sand (H-142) | Plumb Brown (H-298) | Graphite Black (H-146)

               Mojito (H-313) | Crushed Orchid (H-314) | Copper Suede (H-310) | Tequila Sunrise (H-309)

Just as a heads up, these chips are fairly inaccurate. They are made of a really cheap pliable metal and it coats and takes color fairly differently from aluminum. It is a good basis for understanding, but really only use these as a loose guide, not a 1:1 comparison.
Quite right. Your the man. Never had anything cerakoted before so I have no clue. It is nice feeling the finish though, which I imagine will be closer to the real thing even if colors aren't completely. I might go with stormtrooper white just because of the glassy smooth finish.

Sent from my Pixel 3 XL using Tapatalk
Thanks for posting pictures! I actually prefer the way the matte looks! I think I might actually go with Snow White :O!