« previous next »
Pages:  [1] 2 »  All   Go Down

Author Topic: [IC] Igris V1: Old School TKL  (Read 15424 times)

0 Members and 1 Guest are viewing this topic.

Offline iNViSiBiLiTi

  • Thread Starter
  • Posts: 199
[IC] Igris V1: Old School TKL
« on: Wed, 14 October 2020, 01:43:16 »
Igris V1: Throwback to Cone Feet
iC FORM
Technical Specs & Information
  • WKL TKL
  • 0.25mm engraving
  • 20mm tall flat keyboard with screw in cone feet to adjust the angle. 
  • Top Mount only (sorry no gaskets)
  • 2mm polycarbonate plate and 1.5mm aluminum plate Koala/Whale/Jane V2 compatible plate
  • 15 mm feet = 8°
  • 13 mm feet = 7°
  • 11 mm feet = 5°
  • H87A compatible
  • Prototype made in 6063 aluminum
Price
  • 30 Units: $500
  • 100 Units: $400
Unfortunately, even though cone feet is supposed to be a cost savings measure, low quantity runs cannot pass the cost savings to us.  I will update when I get a quote for 100 units if there is enough interest.
Feedback on Colors???
    My philosophy with colors is to be as simple as possible to avoid as many quality and matching issues.  I do not plan on entertaining custom colors or any other color than what I have specified.  Thank you.
    • Space Gray with Red Plate?
    • Black or e-Black with Red Plate?
    • Red with Black Plate?
    Engraving
    I currently have my last name engraved on the keyboard

    I am open to engraving the Igris name on the board, or offer no engraving option, the factory does seem to mind engraving

    Prototype Pictures in Space Gray and Red





    Upcoming Details
    • Sending Prototype to be built by Velvet & Maxf
    • Check fitment with 2mm plate and H87A rev 1.8 PCB (rev 1 has a lowered USB port, oops)
    • New Prototype address small details
    • New Prototype to test brass and e-coat version
    • Test new feet design and angling
    • V2 for non-cone feet lovers?


    Obligatory and Unnecessary Keyboard Lore for Geekhack Interest Checks
    The keyboard is named after Sung Jin-Woo's summoning, Blood Red Commander Igris from the LN and Manwha Solo Leveling by Chu-Gong.  The keyboard design was inspired by old school Korean customs.  More information can be found on my Making Stuff Together! post: https://geekhack.org/index.php?topic=108926[/list]
    « Last Edit: Fri, 27 November 2020, 17:19:44 by iNViSiBiLiTi »
    Logged
    60%: Prophet, GSKT-00, Weaven

    TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

    Bulgogi Board (VA104M)

    Offline iNViSiBiLiTi

    • Thread Starter
    • Posts: 199
    Re: Igris V1: Old School TKL
    « Reply #1 on: Wed, 14 October 2020, 01:44:32 »
    Reserved for answering questions and addressing feedback

    P.S. Heading to bed, so I'll check in the morning.
    P.P.S If I'm not responsive, I'm probably playing Genshin Impact. 

    H87C or USB C options?
    Maybe in the future, but there are many H87A available and I personally want to use the H87A I've purchased.


    F13?
    Maybe in the future, F13 requires a redesign of the top piece and redesigned plate.  It won't be called the Igris V1, maybe a different version.

    Will it be stable?
    Stable on the table


    2mm Poly typing test with Gateron Yellow w/ Cherry tops and OG dyesubs from Maxf!

    « Last Edit: Fri, 30 October 2020, 00:38:11 by iNViSiBiLiTi »
    Logged
    60%: Prophet, GSKT-00, Weaven

    TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

    Bulgogi Board (VA104M)

    Offline Blastoise

    • Posts: 52
    Re: [IC] Igris V1: Old School TKL
    « Reply #2 on: Wed, 14 October 2020, 01:45:41 »
    First after op. The feet are very unique 🙂 Excited to see where this one goes.
    « Last Edit: Wed, 14 October 2020, 01:47:39 by Blastoise »
    Logged

    Offline xIHA

    • Posts: 16
    • Location: Singapore, Singapore, Singapore
    Re: [IC] Igris V1: Old School TKL
    « Reply #3 on: Wed, 14 October 2020, 01:46:16 »
    So littt
    Logged
    Jane v2 | OTD 456gt | LZ Physix | xIHEx (One off comission) | Duck kingsaver | G80-1838HPU

    Offline Agilr

    • Posts: 329
    • Location: Sydney, Australia
    • Never stop achieving
      • Discord Server
    Re: [IC] Igris V1: Old School TKL
    « Reply #4 on: Wed, 14 October 2020, 01:47:33 »
    Nice rectangle
    Logged

    Offline 002_GT

    • Posts: 33
    • Location: Somewhere in stage4ville
    • KR Boards OP
    Re: [IC] Igris V1: Old School TKL
    « Reply #5 on: Wed, 14 October 2020, 01:53:36 »
    Bellion & igris number one..
    Logged

    Offline blacksimon

    • Posts: 167
    • illuminati.works
      • illuminati.works
    Re: [IC] Igris V1: Old School TKL
    « Reply #6 on: Wed, 14 October 2020, 02:16:32 »
    I fkin love cones
    Logged

    Offline marshskitow

    • Posts: 82
    • Location: Switzerland
    Re: [IC] Igris V1: Old School TKL
    « Reply #7 on: Wed, 14 October 2020, 05:18:33 »
    Quote from: Agilr on Wed, 14 October 2020, 01:47:33
    Nice rectangle
    Nice 500$ rectangle


    Envoyé de mon iPhone en utilisant Tapatalk
    Logged

    Offline August

    • Posts: 2
    Re: [IC] Igris V1: Old School TKL
    « Reply #8 on: Wed, 14 October 2020, 06:32:32 »
    Cone gang

    Logged

    Offline gilbert

    • Posts: 98
    • Location: Germany
    Re: [IC] Igris V1: Old School TKL
    « Reply #9 on: Wed, 14 October 2020, 08:38:34 »
    naise
    Logged

    Offline Zeelobby

    • Posts: 790
    Re: [IC] Igris V1: Old School TKL
    « Reply #10 on: Wed, 14 October 2020, 09:51:45 »


    (looks lit tho)
    Logged

    Offline L8T

    • Posts: 73
    Re: [IC] Igris V1: Old School TKL
    « Reply #11 on: Wed, 14 October 2020, 12:04:38 »
    Who is the target demographic for this board?
    Logged

    Offline SenseiJia

    • Posts: 115
    • Hey you.
    Re: [IC] Igris V1: Old School TKL
    « Reply #12 on: Wed, 14 October 2020, 12:09:16 »
    invis boomer
    Logged

    Offline Kokaloo

    • Posts: 462
    • Location: Las Vegas
    • 🤘(• ω •)🤙
    Re: [IC] Igris V1: Old School TKL
    « Reply #13 on: Wed, 14 October 2020, 12:15:01 »
    Quote from: L8T on Wed, 14 October 2020, 12:04:38
    Who is the target demographic for this board?
    people who use keyboards
    Logged

    Offline iNViSiBiLiTi

    • Thread Starter
    • Posts: 199
    Re: [IC] Igris V1: Old School TKL
    « Reply #14 on: Wed, 14 October 2020, 13:37:38 »
    Quote from: L8T on Wed, 14 October 2020, 12:04:38
    Who is the target demographic for this board?https://cdn.geekhack.org/Smileys/solosmileys/sad.gif

    It's intended as a throwback to early kustom designs, but those are exactly the kind of designs that have withstood the test of time that I want to reintroduce into the hobby.  Also most of these cone feet kustoms that used to be dirt cheap are $1000-3000+ nowadays  :(

    Quote from: marshskitow on Wed, 14 October 2020, 05:18:33
    Quote from: Agilr on Wed, 14 October 2020, 01:47:33
    Nice rectangle
    Nice 500$ rectangle


    Envoyé de mon iPhone en utilisant Tapatalk
    still cheaper than an aftermarket DGE  :))
    « Last Edit: Wed, 14 October 2020, 13:39:47 by iNViSiBiLiTi »
    Logged
    60%: Prophet, GSKT-00, Weaven

    TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

    Bulgogi Board (VA104M)

    Offline pool

    • Posts: 34
    Re: [IC] Igris V1: Old School TKL
    « Reply #15 on: Wed, 14 October 2020, 14:25:29 »
    Interested!
    Logged

    Offline treeleaf64

    • Posts: 1094
    • Location: In the depths of the forest
    Re: [IC] Igris V1: Old School TKL
    « Reply #16 on: Wed, 14 October 2020, 17:33:53 »
    Dear Invis,

    It's tree leaf approved. Thank you very very much for making it.  If I ever get over my love for the Column stagger then I will definitely consider this.

    Does it support split BS  or stepped Capslk
    Logged
    Leader of the Gateron gang

    Disclaimer:
    May display immature behavior
    May talk in third person

    Treeleaf's Youtube Channel!
    https://www.youtube.com/channel/UCAVQHinK0K-AjLlbc7MZjfA?view_as=subscriber

    Offline iNViSiBiLiTi

    • Thread Starter
    • Posts: 199
    Re: [IC] Igris V1: Old School TKL
    « Reply #17 on: Wed, 14 October 2020, 18:05:10 »
    Quote from: treeleaf64 on Wed, 14 October 2020, 17:33:53
    Dear Invis,

    It's tree leaf approved. Thank you very very much for making it.  If I ever get over my love for the Column stagger then I will definitely consider this.

    Does it support split BS  or stepped Capslk

    Prototype plates fit stepped caps and full size backspace.  You can use Hiney's universal PCB or another drop in replacement like Mechlovin's pcb/plate assume it fits the Jane V2. 
    Logged
    60%: Prophet, GSKT-00, Weaven

    TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

    Bulgogi Board (VA104M)

    Offline whykayallday

    • Posts: 25
    Re: [IC] Igris V1: Old School TKL
    « Reply #18 on: Wed, 14 October 2020, 18:05:24 »
    Quote from: L8T on Wed, 14 October 2020, 12:04:38
    Who is the target demographic for this board?

    not you.

    Anyways, always wanted a modernized duck saver. So In.
    « Last Edit: Wed, 14 October 2020, 18:10:04 by whykayallday »
    Logged

    Offline subcat

    • Posts: 193
    • Location: deep in the east
    Re: [IC] Igris V1: Old School TKL
    « Reply #19 on: Wed, 14 October 2020, 20:10:23 »
    nice concept, love cone feet.
    confused as to how $500 is justified though honestly, would like to hear more on that.
    Logged
    in the belly of the beast

    DK Saver | 356L | 356CL | 356CL DGE | G80-3484HKCUS x 2 | G80-5000HPMUS | G81-3100SDU | G81-3100SAV | Majestouch Tenkeyless | Realforce 87UB | Realforce 87UB-55 | PD-KB300BN | PD-KB400B | PD-KB400BN | PD-KB400W | PD-KB400WN | JUKI FD-01R

    Offline iNViSiBiLiTi

    • Thread Starter
    • Posts: 199
    Re: [IC] Igris V1: Old School TKL
    « Reply #20 on: Wed, 14 October 2020, 21:07:02 »
    Quote from: subcat on Wed, 14 October 2020, 20:10:23
    nice concept, love cone feet.
    confused as to how $500 is justified though honestly, would like to hear more on that.

    Cone Feet in small quantities is not actually cheap to make, my proto was $50 a foot, in addition to paying for the rest of the keyboard.  It's about $350 just to get the board from the factory to me, then you'll need a PCB, and then shipping... The margins for 30 units is not as large as it seems. 
    Logged
    60%: Prophet, GSKT-00, Weaven

    TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

    Bulgogi Board (VA104M)

    Offline Sifo

    • Alter
    • * Exquisite Elder
    • Posts: 7273
    • Location: #GOLDSPRINGS, #LEGITBALLIN
    • I love Elzy
    Re: [IC] Igris V1: Old School TKL
    « Reply #21 on: Wed, 14 October 2020, 21:13:37 »
    i miss my kmac let's get it
    Logged
    (Forever) Illustrious.

    Offline Alessio01

    • Posts: 24
    Re: [IC] Igris V1: Old School TKL
    « Reply #22 on: Wed, 14 October 2020, 23:34:35 »
    Quote from: L8T on Wed, 14 October 2020, 12:04:38
    Who is the target demographic for this board?

    Me
    Logged

    Offline Makish

    • Posts: 13
    • hi
    Re: [IC] Igris V1: Old School TKL
    « Reply #23 on: Thu, 15 October 2020, 15:10:42 »
    would v2 be called beru?
    Logged

    Offline Baggedyams

    • Posts: 1
    Re: [IC] Igris V1: Old School TKL
    « Reply #24 on: Thu, 15 October 2020, 16:53:57 »
    I’m down for it


    Sent from my iPhone using Tapatalk
    Logged

    Offline iNViSiBiLiTi

    • Thread Starter
    • Posts: 199
    Re: [IC] Igris V1: Old School TKL
    « Reply #25 on: Thu, 15 October 2020, 22:01:48 »
    Quote from: Makish on Thu, 15 October 2020, 15:10:42
    would v2 be called beru?

    Prolly different aesthetic design for Beru ;)
    Logged
    60%: Prophet, GSKT-00, Weaven

    TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

    Bulgogi Board (VA104M)

    Offline catamscott

    • Posts: 225
    • Location: Oregon
    Re: [IC] Igris V1: Old School TKL
    « Reply #26 on: Thu, 15 October 2020, 22:13:00 »
    such a big fan of the early custom boards with cone feet, this looks really really great. both engravings look good, but i think i prefer the original engraving over the igris one. will definitely follow this :thumb:
    Logged

    Offline tnk

    • Posts: 4
    • Location: United States
      • Github
    Re: [IC] Igris V1: Old School TKL
    « Reply #27 on: Fri, 16 October 2020, 02:24:01 »
    Looks nice!
    Logged

    Offline generic_panda

    • Posts: 12
    Re: [IC] Igris V1: Old School TKL
    « Reply #28 on: Fri, 16 October 2020, 04:02:52 »
    Cone feet are not really my jam, but the proto looks great!  Excited to see more throwback boards. GLWIC
    Logged

    Offline ligongduck

    • Posts: 24
    Re: [IC] Igris V1: Old School TKL
    « Reply #29 on: Mon, 19 October 2020, 23:05:54 »
    Interesting
    Logged

    Offline iNViSiBiLiTi

    • Thread Starter
    • Posts: 199
    Re: [IC] Igris V1: Old School TKL
    « Reply #30 on: Tue, 20 October 2020, 00:25:36 »
    maxf had a small stream for the 2mm polycarbonate build! 

    Seems like a total winner!

    https://www.twitch.tv/videos/775802270?t=9961s
    Logged
    60%: Prophet, GSKT-00, Weaven

    TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

    Bulgogi Board (VA104M)

    Offline Muchacho

    • Posts: 24
    Re: [IC] Igris V1: Old School TKL
    « Reply #31 on: Tue, 20 October 2020, 03:59:49 »
    This looks like a Aliexpress aluminium Filco case, but 3 times the price.
    Logged

    Offline paulgali

    • Posts: 61
    • Location: Dubai, UAE
    • Taco Baul can't find good tacos
    Re: [IC] Igris V1: Old School TKL
    « Reply #32 on: Tue, 20 October 2020, 05:21:10 »
    The proto looked very nice invis. Whilst i personally prefer a thiccboi chassis, this is something I will keep my eye on. I always wanted to try a 0 degree board, outside of pizza80 there isnt much
    Logged

    Offline Raravin

    • Posts: 99
    Re: [IC] Igris V1: Old School TKL
    « Reply #33 on: Tue, 20 October 2020, 09:37:02 »
    Not going to lie I came here expecting something from the solo leveling web comic lol looks good though
    Logged

    Offline Pizza_on_Pineapple

    • Posts: 29
    • Location: Germany
    Re: [IC] Igris V1: Old School TKL
    « Reply #34 on: Tue, 20 October 2020, 11:33:27 »
    I like it, interested (once the price drops :D). Filled out the form.
    Logged

    Offline dabeshu

    • Posts: 40
    Re: [IC] Igris V1: Old School TKL
    « Reply #35 on: Tue, 20 October 2020, 14:31:07 »
    This is a nice keyboard.
    Logged
    Matrix 2.0add|Duck Sidewinder|Tofu HHKB V1|PFU HHKB Pro 2 x2|PD-KB02|Apple M0110|RAMA M60-A|G80-11900|Kobo Filco|87UB 55g|TG3 “Cop Car”

    Formerly owned:
    SIIG Minitouch, AEKII, KBC Poker X, Realforce Variable-weight 87u, Noppoo Choc Mini, Leopold FC750R, HHKB Lite 2, Filco Majestouch

    Offline Dakk1d

    • Posts: 47
    Re: [IC] Igris V1: Old School TKL
    « Reply #36 on: Tue, 20 October 2020, 15:06:45 »
    500$ for cones noty
    Logged
    ¯\_(ツ)_/¯

    Offline iNViSiBiLiTi

    • Thread Starter
    • Posts: 199
    Re: [IC] Igris V1: Old School TKL
    « Reply #37 on: Tue, 20 October 2020, 15:27:59 »
    Quote from: Dakk1d on Tue, 20 October 2020, 15:06:45
    500$ for cones noty

    • I've gotten over 30 responses, so I'm hoping we get enough people for an upcoming price drop.
    • This is an IC, if you have any constructive criticism or any kind of real feedback, I'd like to hear it.
    • 30 Unit margins sucks for the customers, no way around it.  It's about $400 in raw materials to get to me
    • Would you rather pay $1k for a KMAC with a sus PCB, or $3k for a DGE?
    • Even at $500, I think it's still better than half the custom keyboards in GB and IC.
    Logged
    60%: Prophet, GSKT-00, Weaven

    TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

    Bulgogi Board (VA104M)

    Offline iNViSiBiLiTi

    • Thread Starter
    • Posts: 199
    Re: [IC] Igris V1: Old School TKL
    « Reply #38 on: Tue, 20 October 2020, 15:28:34 »
    Quote from: Raravin on Tue, 20 October 2020, 09:37:02
    Not going to lie I came here expecting something from the solo leveling web comic lol looks good though

    Next version I promise!
    Logged
    60%: Prophet, GSKT-00, Weaven

    TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

    Bulgogi Board (VA104M)

    Offline iNViSiBiLiTi

    • Thread Starter
    • Posts: 199
    Re: [IC] Igris V1: Old School TKL
    « Reply #39 on: Tue, 20 October 2020, 15:30:50 »
    Quote from: Muchacho on Tue, 20 October 2020, 03:59:49
    This looks like a Aliexpress aluminium Filco case, but 3 times the price.

    If I could make as many boards as the aliexpress aluminum filco case, I could cut the price down by 3 times.  Also the factory is going to way better quality than the aliexpress board. 
    Logged
    60%: Prophet, GSKT-00, Weaven

    TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

    Bulgogi Board (VA104M)

    Offline Sifo

    • Alter
    • * Exquisite Elder
    • Posts: 7273
    • Location: #GOLDSPRINGS, #LEGITBALLIN
    • I love Elzy
    Re: [IC] Igris V1: Old School TKL
    « Reply #40 on: Tue, 20 October 2020, 19:16:32 »
    Quote from: iNViSiBiLiTi on Tue, 20 October 2020, 15:27:59
    • Even at $500, I think it's still better than half the custom keyboards in GB and IC.

    sad but true
    Logged
    (Forever) Illustrious.

    Offline elmo

    • Posts: 332
    • Location: Hamburg, Germany
    • Hello I like keyboards
      • Elmo's keyboards
    Re: [IC] Igris V1: Old School TKL
    « Reply #41 on: Thu, 22 October 2020, 02:49:03 »
    I like this.

    Also: Nice backyard.
    Logged

    Offline Rayndalf

    • Posts: 429
    Re: [IC] Igris V1: Old School TKL
    « Reply #42 on: Thu, 22 October 2020, 02:51:18 »
    I love the stepped "Devo hat" style feet.
    Logged

    Offline iNViSiBiLiTi

    • Thread Starter
    • Posts: 199
    Re: [IC] Igris V1: Old School TKL
    « Reply #43 on: Thu, 29 October 2020, 23:59:13 »
    NEW PHOTOS BY MAXF (Thank you so much)



    Logged
    60%: Prophet, GSKT-00, Weaven

    TKL: TGR Jane V2, Jane V2 CE, KFE, Noxary 280 S, Acrylic Unicorn, Mira SE, Igris V1

    Bulgogi Board (VA104M)

    Offline paperassgasket

    • Posts: 230
    Re: [IC] Igris V1: Old School TKL
    « Reply #44 on: Fri, 30 October 2020, 00:55:43 »
    Logged

    Offline maxf

    • Posts: 48
    Re: [IC] Igris V1: Old School TKL
    « Reply #45 on: Sat, 31 October 2020, 14:18:35 »
    so stoked to have been able to build this.  thanks invis!

    starting my shrine to the RNG gods now for a spot when this goes to buy.   :thumb:
    Logged

    Offline pr0ximity

    • Posts: 2601
    • Location: Vacationland
    Re: [IC] Igris V1: Old School TKL
    « Reply #46 on: Sat, 31 October 2020, 16:51:52 »
    Quote from: maxf on Sat, 31 October 2020, 14:18:35
    so stoked to have been able to build this.  thanks invis!

    starting my shrine to the RNG gods now for a spot when this goes to buy.   :thumb:

    Was a great build and sound test. Is the DGE side-by-side still planned? Wouldn’t sway me either way, this board is on definitely my wishlist, but curious how some of the cone feet boards compare (KMAC and LZ-GH would be cool comparisons as well...)
    Logged
    | Flickr | Current: Koala/GSKT-00/JaneV2CE/Whale/Pro1/356mini/1390120/F107/3101

    Offline Sifo

    • Alter
    • * Exquisite Elder
    • Posts: 7273
    • Location: #GOLDSPRINGS, #LEGITBALLIN
    • I love Elzy
    Re: [IC] Igris V1: Old School TKL
    « Reply #47 on: Sat, 31 October 2020, 17:03:17 »
    Quote from: pr0ximity on Sat, 31 October 2020, 16:51:52
    Quote from: maxf on Sat, 31 October 2020, 14:18:35
    so stoked to have been able to build this.  thanks invis!

    starting my shrine to the RNG gods now for a spot when this goes to buy.   :thumb:

    Was a great build and sound test. Is the DGE side-by-side still planned? Wouldn’t sway me either way, this board is on definitely my wishlist, but curious how some of the cone feet boards compare (KMAC and LZ-GH would be cool comparisons as well...)

    since when does an lz-gh have cone feet
    Logged
    (Forever) Illustrious.

    Offline pr0ximity

    • Posts: 2601
    • Location: Vacationland
    Re: [IC] Igris V1: Old School TKL
    « Reply #48 on: Sat, 31 October 2020, 17:08:53 »
    Quote from: Sifo on Sat, 31 October 2020, 17:03:17
    Quote from: pr0ximity on Sat, 31 October 2020, 16:51:52
    Quote from: maxf on Sat, 31 October 2020, 14:18:35
    so stoked to have been able to build this.  thanks invis!

    starting my shrine to the RNG gods now for a spot when this goes to buy.   :thumb:

    Was a great build and sound test. Is the DGE side-by-side still planned? Wouldn’t sway me either way, this board is on definitely my wishlist, but curious how some of the cone feet boards compare (KMAC and LZ-GH would be cool comparisons as well...)

    since when does an lz-gh have cone feet

    You know what I mean  ^-^
    Logged
    | Flickr | Current: Koala/GSKT-00/JaneV2CE/Whale/Pro1/356mini/1390120/F107/3101

    Offline devilDesignsKB

    • Posts: 14
    Re: [IC] Igris V1: Old School TKL
    « Reply #49 on: Sat, 31 October 2020, 17:13:50 »
    is this font supposed to look like the TGR branding? I am curious as to whether it is specifically TGR or just a korean custom thing I don't know of  :p



    I guess it does have the OTD-esque font too.. initially got TGR vibes because of the cut through the letters!!
    « Last Edit: Sat, 31 October 2020, 17:15:36 by devilDesignsKB »
    Logged
    Pages:  [1] 2 »  All   Go Up
    « previous next »