Author Topic: LightSaver V2 Group Buy  (Read 242151 times)

0 Members and 3 Guests are viewing this topic.

Offline bianco

  • Posts: 461
  • Location: СИНГАПОРЕ
Re: LightSaver V2 Group Buy
« Reply #800 on: Wed, 20 August 2014, 07:13:03 »
xposting. mine. v2


with the v1

Offline Blackehart

  • Posts: 316
  • Location: Southern California, USA
  • Booty Aficionado Extraordinaire
Re: LightSaver V2 Group Buy
« Reply #801 on: Wed, 20 August 2014, 12:10:53 »
n/m, answered in pm

Offline Ronnn

  • Posts: 45
  • Location: Toronto
Re: LightSaver V2 Group Buy
« Reply #802 on: Wed, 20 August 2014, 13:04:31 »
Here are the pictures of the assembled sets..

http://kbdlab.co.kr/index.php?document_srl=449172&mid=board_hDJd48

Also,

To adjust the brightness:

You can find the MFN key.

To adjust LED brightness you keep pressing MFN + LED UP(or LED DOWN)

Please make sure you keep pressing the key for a while.

Well, no matter how I press the led up or down key, they only serve as led on or off. Do you get brightness other than maximum brightness and off?

Offline Zombly

  • Posts: 226
  • Location: ON, Canada
  • Zombie Enthusiast
Re: LightSaver V2 Group Buy
« Reply #803 on: Wed, 20 August 2014, 14:31:17 »
I'm so excited... any estimated ETA in Canada?
In the process of my custom Zombie board
[WTB MX Zombro's]

Offline Lurch

  • Posts: 1268
  • The only good system is a sound system.
Re: LightSaver V2 Group Buy
« Reply #804 on: Wed, 20 August 2014, 14:44:44 »
This might be my favorite design. Would love to get my hands on one some day. ^-^
Quote from: Flyersfan1
im so glad you've stopped flipping the spacebar

Offline animaliaparadoxa

  • Posts: 60
  • Location: Oakland
Re: LightSaver V2 Group Buy
« Reply #805 on: Wed, 20 August 2014, 16:45:11 »
Here are the pictures of the assembled sets..

http://kbdlab.co.kr/index.php?document_srl=449172&mid=board_hDJd48

Also,

To adjust the brightness:

You can find the MFN key.

To adjust LED brightness you keep pressing MFN + LED UP(or LED DOWN)

Please make sure you keep pressing the key for a while.

Well, no matter how I press the led up or down key, they only serve as led on or off. Do you get brightness other than maximum brightness and off?


Maybe somebody should start a Duck support thread for troubleshooting these things.

It would be nice to find out if these issues are defects or user error. My V2 won't even change layers, much less toggle LED modes. Of course I've followed what instructions I've found.

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: LightSaver V2 Group Buy
« Reply #806 on: Fri, 22 August 2014, 15:43:09 »
Maybe we should start an IC for Lightsaver v2 round 2.  :-*

Offline sakai4eva

  • Posts: 281
Re: LightSaver V2 Group Buy
« Reply #807 on: Fri, 22 August 2014, 22:20:58 »
I'd be down for another set of plate and PCB at least!

Offline ApocalypseMaow

  • Kitteh Overlord
  • Posts: 1864
  • Location: Arkansas
  • Say WHAAT...
Re: LightSaver V2 Group Buy
« Reply #808 on: Sat, 23 August 2014, 07:50:07 »
I'd be down for another set of plate and PCB at least!
Yeah, if elton runs just a pcb/plate buy. I will work a little harder to get those GON style cases made.  :p
{WTT}HoffNudes(WTS)BLK LightSaverV2          SteamProfile
"#baby****fangerz" -Vesper 2015

Offline WinterIsle

  • Posts: 136
Re: LightSaver V2 Group Buy
« Reply #809 on: Sat, 23 August 2014, 08:41:25 »
Maybe somebody should start a Duck support thread for troubleshooting these things.

It would be nice to find out if these issues are defects or user error. My V2 won't even change layers, much less toggle LED modes. Of course I've followed what instructions I've found.
I believe by default the firmware was only flashed with single layer.
To add more layers and LED modes u need to do keymapping and flash firmware again.
There's a thread in geekhack media section about lightsaver by photoelectric iinm.
I wrote myself a simple guide thou:

Offline animaliaparadoxa

  • Posts: 60
  • Location: Oakland
Re: LightSaver V2 Group Buy
« Reply #810 on: Sat, 23 August 2014, 09:11:48 »
Maybe somebody should start a Duck support thread for troubleshooting these things.

It would be nice to find out if these issues are defects or user error. My V2 won't even change layers, much less toggle LED modes. Of course I've followed what instructions I've found.
I believe by default the firmware was only flashed with single layer.
To add more layers and LED modes u need to do keymapping and flash firmware again.
There's a thread in geekhack media section about lightsaver by photoelectric iinm.
I wrote myself a simple guide thou:
I think I know which thread you're taking about. Thanks so much for the guide though. I'll try it out this weekend.

I would be interested in another GB especially for the aluminium case.

Also, has anybody had an acrylic case made for their PCB/plate order? I know a few people with laser cutters but I'm having trouble finding acrylic in the correct thickness. Plus I'd just like to see people's Lightsavers.

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: LightSaver V2 Group Buy
« Reply #811 on: Sat, 23 August 2014, 09:24:53 »
Is there honestly no one with an extra v2 pcb?  :p
Well elton, looks like there's a good amount of interest on GH. Is a R2 a possibility?
Could you ask duck for me pretty please?  :-*
[there are about 4 other people who haven't posted here looking for complete v2 kits in classifieds]

Offline animaliaparadoxa

  • Posts: 60
  • Location: Oakland
Re: LightSaver V2 Group Buy
« Reply #812 on: Sat, 23 August 2014, 09:36:12 »
Is there honestly no one with an extra v2 pcb?  :p
Well elton, looks like there's a good amount of interest on GH. Is a R2 a possibility?
Could you ask duck for me pretty please?  :-*
[there are about 4 other people who haven't posted here looking for complete v2 kits in classifieds]
Yeah I have an extra PCB but I was kind of hoping to hold on to it to study it's design. Would like to eventually design PCBs myself but who wouldn't. I'll consider letting it go as I really don't have the time to do anything with it for a while. No extra plate though.

Offline sakai4eva

  • Posts: 281
Re: LightSaver V2 Group Buy
« Reply #813 on: Sat, 23 August 2014, 12:11:09 »
Just plugged the one I was delivered in and it says Unknown USB device (device descriptor request failed). Any ideas? Windows 8.

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: LightSaver V2 Group Buy
« Reply #814 on: Sat, 23 August 2014, 12:33:55 »
Just plugged the one I was delivered in and it says Unknown USB device (device descriptor request failed). Any ideas? Windows 8.

Uh I think something about Flip and the atmega34u4 driver.

photos thread http://geekhack.org/index.php?topic=53942.0
links to the kmac guide [which is very similar] http://geekhack.org/index.php?topic=49647.0

Offline sakai4eva

  • Posts: 281
Re: LightSaver V2 Group Buy
« Reply #815 on: Sat, 23 August 2014, 12:59:03 »
Just plugged the one I was delivered in and it says Unknown USB device (device descriptor request failed). Any ideas? Windows 8.

Uh I think something about Flip and the atmega34u4 driver.

photos thread http://geekhack.org/index.php?topic=53942.0
links to the kmac guide [which is very similar] http://geekhack.org/index.php?topic=49647.0

Fixed it. Faulty USB cable.

But  I still can't get it recognized as ATMEGA, which precludes any reprogramming... which I actually need because it is defaulted to the WKL 1800-layout, which my guy doesn't want...

Offline animaliaparadoxa

  • Posts: 60
  • Location: Oakland
Re: LightSaver V2 Group Buy
« Reply #816 on: Sat, 23 August 2014, 13:18:05 »
Yeah I had to remove whatever driver it installed automatically and install the one from the flip root\usb folder.

Offline sakai4eva

  • Posts: 281
Re: LightSaver V2 Group Buy
« Reply #817 on: Sat, 23 August 2014, 15:01:50 »
Fixed all the problems. It's live!

Such a bittersweet experience for me as I complete this project to sell to a friend.

Korean keyboards... feel completely different.

Oh well :)

Offline WinterIsle

  • Posts: 136
Re: LightSaver V2 Group Buy
« Reply #818 on: Sat, 23 August 2014, 22:02:35 »
I think I know which thread you're taking about. Thanks so much for the guide though. I'll try it out this weekend.

I would be interested in another GB especially for the aluminium case.

Also, has anybody had an acrylic case made for their PCB/plate order? I know a few people with laser cutters but I'm having trouble finding acrylic in the correct thickness. Plus I'd just like to see people's Lightsavers.
No prob  ;) .
I also hope that I got a chance to get myself v2 pcb and replace my v1  :p

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: LightSaver V2 Group Buy
« Reply #819 on: Sat, 23 August 2014, 23:00:09 »
I think I know which thread you're taking about. Thanks so much for the guide though. I'll try it out this weekend.

I would be interested in another GB especially for the aluminium case.

Also, has anybody had an acrylic case made for their PCB/plate order? I know a few people with laser cutters but I'm having trouble finding acrylic in the correct thickness. Plus I'd just like to see people's Lightsavers.
No prob  ;) .
I also hope that I got a chance to get myself v2 pcb and replace my v1  :p

DIBS! I'll fight you  :-\  :-*

Offline Sent

  • Simplistic Serenity
  • * Exquisite Elder
  • Posts: 1951
  • Location: SoCal
  • Karlie Kloss <3
Re: LightSaver V2 Group Buy
« Reply #820 on: Sun, 24 August 2014, 01:22:57 »
Another round of these would be awesome. Just sayin'.   :'(

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: LightSaver V2 Group Buy
« Reply #821 on: Sun, 24 August 2014, 03:27:41 »
Another round of these would be awesome. Just sayin'.   :'(

 :confused: :-* ;D?

Offline sakai4eva

  • Posts: 281
Re: LightSaver V2 Group Buy
« Reply #822 on: Sun, 24 August 2014, 06:39:52 »
Welp, setting up the software for the Lightsaber is weird... anyone know how to put media keys in?

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: LightSaver V2 Group Buy
« Reply #823 on: Sun, 24 August 2014, 11:34:43 »
Welp, setting up the software for the Lightsaber is weird... anyone know how to put media keys in?

Using the O2D custom keymapper it looks like media keys are "Mac Only."

Offline sakai4eva

  • Posts: 281
Re: LightSaver V2 Group Buy
« Reply #824 on: Mon, 25 August 2014, 23:21:11 »
Great, another hiccup. Anyone knows how to program the 4-key arrow cluster in the keymapper? It refuses to save my settings...

Pictures tonight when I get home, if need be.

Offline Crabby_b

  • Posts: 39
  • Location: New York
Re: LightSaver V2 Group Buy
« Reply #825 on: Tue, 26 August 2014, 06:26:26 »
Great, another hiccup. Anyone knows how to program the 4-key arrow cluster in the keymapper? It refuses to save my settings...

Pictures tonight when I get home, if need be.

I ran into the same issue. I had to use the previous version of the firmware to get it to work. Seems like the newest release is a little buggy. If you want media keys, I think the TMK firmware has them. The only issue with that is you lose all of the led effects. On/off for the different zones is the only option.

Offline sakai4eva

  • Posts: 281
Re: LightSaver V2 Group Buy
« Reply #826 on: Tue, 26 August 2014, 08:43:42 »
Great, another hiccup. Anyone knows how to program the 4-key arrow cluster in the keymapper? It refuses to save my settings...

Pictures tonight when I get home, if need be.

I ran into the same issue. I had to use the previous version of the firmware to get it to work. Seems like the newest release is a little buggy. If you want media keys, I think the TMK firmware has them. The only issue with that is you lose all of the led effects. On/off for the different zones is the only option.

Damnit! Same No difference then :(

Offline Blackehart

  • Posts: 316
  • Location: Southern California, USA
  • Booty Aficionado Extraordinaire
Re: LightSaver V2 Group Buy
« Reply #827 on: Thu, 28 August 2014, 19:22:43 »
What's the good word on shipping?

 :p

Offline DamienG

  • Posts: 315
  • Location: Redmond, WA
    • DamienG
Re: LightSaver V2 Group Buy
« Reply #828 on: Sat, 30 August 2014, 15:02:59 »
Given the scant documentation for building this... any recommendations for LED size/voltage?

[)amien

Offline animaliaparadoxa

  • Posts: 60
  • Location: Oakland
Re: LightSaver V2 Group Buy
« Reply #829 on: Sat, 30 August 2014, 20:55:54 »
Given the scant documentation for building this... any recommendations for LED size/voltage?

[)amien

All of these have worked for me so far.

http://www.ebay.com/itm/221138055543
http://www.ebay.com/itm/331085659437
http://www.ebay.com/itm/320999090387
http://www.ebay.com/itm/320999090146
http://www.ebay.com/itm/320999089508
http://www.ebay.com/itm/320999088871

I'm also waiting to receive these less common colours:
http://www.aliexpress.com/item/High-Quality-and-High-lightness-100pcs-2x3x4-Rectangular-square-type-sky-blue-color-led-beads-brightness600/2022772817.html

The only place I found cyan and sky-blue besides Taobao.

Also waiting on these 3528s for the side:

http://www.aliexpress.com/item/Free-Shipping-50pcs-POWER-TOP-SMD-SMT-PLCC-2-1210-3528-purple-LED-New/2001195224.html
http://www.aliexpress.com/item/Bright-3528-ice-blue-instrument-disk-1210-light-blue-smd-led-light-emitting-diode/1857958607.html



Anybody find a real solution for the "?" non-mapping arrow key bug?

EDIT: Also where are people getting their acrylic cases cut? I'm awaiting a quote from an acrylic fabricator in China as places like TAP plastics don't have acrylic in the right thicknesses. I know people with laser cutters but sourcing the acrylic is a problem.
« Last Edit: Sat, 30 August 2014, 21:06:13 by animaliaparadoxa »

Offline BamBooBam

  • Posts: 16
  • Location: Somewhere, really
  • Yammy Caps
Re: LightSaver V2 Group Buy
« Reply #830 on: Sat, 30 August 2014, 23:07:00 »
If you search LED大卖场 on Taobao, they have some highest quality LEDs for keyboards :p
Geekhack an alternation of money sink.

Offline Crabby_b

  • Posts: 39
  • Location: New York
Re: LightSaver V2 Group Buy
« Reply #831 on: Sun, 31 August 2014, 07:10:29 »
Given the scant documentation for building this... any recommendations for LED size/voltage?

[)amien

All of these have worked for me so far.

http://www.ebay.com/itm/221138055543
http://www.ebay.com/itm/331085659437
http://www.ebay.com/itm/320999090387
http://www.ebay.com/itm/320999090146
http://www.ebay.com/itm/320999089508
http://www.ebay.com/itm/320999088871

I'm also waiting to receive these less common colours:
http://www.aliexpress.com/item/High-Quality-and-High-lightness-100pcs-2x3x4-Rectangular-square-type-sky-blue-color-led-beads-brightness600/2022772817.html

The only place I found cyan and sky-blue besides Taobao.

Also waiting on these 3528s for the side:

http://www.aliexpress.com/item/Free-Shipping-50pcs-POWER-TOP-SMD-SMT-PLCC-2-1210-3528-purple-LED-New/2001195224.html
http://www.aliexpress.com/item/Bright-3528-ice-blue-instrument-disk-1210-light-blue-smd-led-light-emitting-diode/1857958607.html



Anybody find a real solution for the "?" non-mapping arrow key bug?

EDIT: Also where are people getting their acrylic cases cut? I'm awaiting a quote from an acrylic fabricator in China as places like TAP plastics don't have acrylic in the right thicknesses. I know people with laser cutters but sourcing the acrylic is a problem.

You should be able to use the previous version of the firmware to re-map the arrow keys. They still show up as ? in the software, but I was able to move them successfully.

My suggestion for having an acrylic case made would be to use someone local to you. I had one made, they didn't have the exact sizes of acrylic thickness that are on the cad files, but most of the measurements are close. I think it turned out pretty well.

Offline animaliaparadoxa

  • Posts: 60
  • Location: Oakland
Re: LightSaver V2 Group Buy
« Reply #832 on: Sun, 31 August 2014, 12:00:48 »
Given the scant documentation for building this... any recommendations for LED size/voltage?

[)amien

All of these have worked for me so far.

http://www.ebay.com/itm/221138055543
http://www.ebay.com/itm/331085659437
http://www.ebay.com/itm/320999090387
http://www.ebay.com/itm/320999090146
http://www.ebay.com/itm/320999089508
http://www.ebay.com/itm/320999088871

I'm also waiting to receive these less common colours:
http://www.aliexpress.com/item/High-Quality-and-High-lightness-100pcs-2x3x4-Rectangular-square-type-sky-blue-color-led-beads-brightness600/2022772817.html

The only place I found cyan and sky-blue besides Taobao.

Also waiting on these 3528s for the side:

http://www.aliexpress.com/item/Free-Shipping-50pcs-POWER-TOP-SMD-SMT-PLCC-2-1210-3528-purple-LED-New/2001195224.html
http://www.aliexpress.com/item/Bright-3528-ice-blue-instrument-disk-1210-light-blue-smd-led-light-emitting-diode/1857958607.html



Anybody find a real solution for the "?" non-mapping arrow key bug?

EDIT: Also where are people getting their acrylic cases cut? I'm awaiting a quote from an acrylic fabricator in China as places like TAP plastics don't have acrylic in the right thicknesses. I know people with laser cutters but sourcing the acrylic is a problem.

You should be able to use the previous version of the firmware to re-map the arrow keys. They still show up as ? in the software, but I was able to move them successfully.

My suggestion for having an acrylic case made would be to use someone local to you. I had one made, they didn't have the exact sizes of acrylic thickness that are on the cad files, but most of the measurements are close. I think it turned out pretty well.

Previous as in "02D_KeyMapper_Custom_v1.4.305" or Duck's original "TrueKeyMapper"? Thanks.

Offline Crabby_b

  • Posts: 39
  • Location: New York
Re: LightSaver V2 Group Buy
« Reply #833 on: Sun, 31 August 2014, 12:09:05 »
You should try using the previous release of the O2D custom firmware.

Offline WinterIsle

  • Posts: 136
Re: LightSaver V2 Group Buy
« Reply #834 on: Sun, 31 August 2014, 23:46:45 »
Preset the arrow keys with TrueKeyMapper for the layer u want.
Open the hex file with 02d to edit afterward.
However in this way u will be limited with single normal and fn layer only.

Offline elton5354

  • Thread Starter
  • Posts: 2132
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #835 on: Wed, 03 September 2014, 07:01:31 »
All assembled lightsavers are shipped now. Sorry for the delay.

Offline pasph

  • Posts: 1059
  • Location: Italy
Re: LightSaver V2 Group Buy
« Reply #836 on: Wed, 03 September 2014, 07:43:30 »
Tracking #s?
"There is more stupidity than hydrogen in the universe, and it has a longer shelf life"

Offline sakai4eva

  • Posts: 281
Re: LightSaver V2 Group Buy
« Reply #837 on: Wed, 03 September 2014, 08:20:23 »
Elton, is there a possibility of reaching out to Duck to get the keymapper fixed? It's kinda frustrating otherwise :(

Offline elton5354

  • Thread Starter
  • Posts: 2132
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #838 on: Wed, 03 September 2014, 09:38:08 »
I will have the tracking #s by tonight or whenever I get them.  As for the keymapping software, I have addressed this to them.  Hopefully it gets fixed.  I haven't played around with it yet as I've been using the default setting up to now.  And no LEDs on mine yet as well...pretty bare =\

Offline animaliaparadoxa

  • Posts: 60
  • Location: Oakland
Re: LightSaver V2 Group Buy
« Reply #839 on: Wed, 03 September 2014, 09:45:27 »
I will have the tracking #s by tonight or whenever I get them.  As for the keymapping software, I have addressed this to them.  Hopefully it gets fixed.  I haven't played around with it yet as I've been using the default setting up to now.  And no LEDs on mine yet as well...pretty bare =\
Thanks for doing this. It sucks to compromise with an otherwise great keyboard.

Offline geniekid

  • Posts: 758
  • Location: Chicago, IL
Re: LightSaver V2 Group Buy
« Reply #840 on: Wed, 03 September 2014, 09:48:57 »
The key mapping software is not very good at this time - I gave it a couple of tries, but in the end decided to use TMK firmware.  Highly recommend using that if you're comfortable with the process of editing config files in text, building via Makefile/GCC and flashing using FLIP.
« Last Edit: Wed, 03 September 2014, 09:51:48 by geniekid »

Offline sakai4eva

  • Posts: 281
Re: LightSaver V2 Group Buy
« Reply #841 on: Wed, 03 September 2014, 09:57:53 »
TMK doesn't have the bling options that my friend wants. HE rather have shinies than a good keymap :(

Offline taylordcraig

  • Posts: 1044
  • Location: BC, Canada
  • New Keyboard Enthusiast [needs to learn to solder]
Re: LightSaver V2 Group Buy
« Reply #842 on: Wed, 03 September 2014, 17:27:02 »
TMK doesn't have the bling options that my friend wants. HE rather have shinies than a good keymap :(

can you make an image of the map you want?
I dont seem to have any trouble programming my v1 pcb with the new o2d and truekeymapper combined.
I couldn't figure out LED brightness but I do have my clusters with different lighting settings.

Offline elton5354

  • Thread Starter
  • Posts: 2132
  • Location: Canada
Re: LightSaver V2 Group Buy
« Reply #843 on: Wed, 03 September 2014, 21:06:59 »
Tracking #s are up

Offline dragonken

  • Posts: 96
  • Location: Hong Kong
Re: LightSaver V2 Group Buy
« Reply #844 on: Wed, 03 September 2014, 21:37:55 »
Tracking #s are up

great thanks elton. Mine will be arrived by this weekend.

Offline blighty

  • Posts: 365
  • Location: New York, USA
Re: LightSaver V2 Group Buy
« Reply #845 on: Thu, 04 September 2014, 06:13:26 »
Tracking #s are up

Where are the tracking numbers posted?
LZ ergo (MX silent red) | JER - A06 (MX silent black-red springs) | Duck Lightsaver V2 (MX red) | Duck Octogon V2 (gateron clear) (lifted pads) | Duck Orion V2 (gateron red) | Realforce R2TSLA-US4-IV | Realforce R2TLSA-US4-BK | TX 75 (gateron clear) | KBDFANS 75 ("vintage" MX blues) | Kinesis Freestyle Pro (MX red) | NIZ 84EC-S (35gr) | MS Surface Ergonomic | MS Natural Ergonomic Keyboard 4000 | Filco Majestouch 2 TKL (MX black | Phantom (Filco case) ("vintage" MX blacks | Spr1t 75% PCB x 2 (MX black and gateron clear) | Cherry G80-1865 (MX browns with black springs)


Offline blighty

  • Posts: 365
  • Location: New York, USA
Re: LightSaver V2 Group Buy
« Reply #847 on: Thu, 04 September 2014, 10:57:36 »
Tracking #s are up

Where are the tracking numbers posted?

The #1, check order link:
https://docs.google.com/spreadsheet/pub?key=0Akw9rY8oi1o6dDZDVE9IWWc0OGNkc19hcGx6TjN3c2c&single=true&gid=2&output=html



Thanks, I didn't notice the tracking numbers on the side.  I guess I will get this before R5...  Was planning on using the WoB with WoR highlights SA caps, but now I'm torn between using Cherry WoB, Dolch, or the Skull Squadron DSA caps.  I think the Skull Squad caps have a bit too much flair for me to use for a daily driver, but it's also a shame to just have them sitting in a box.  Oh, first world problems.... :)
LZ ergo (MX silent red) | JER - A06 (MX silent black-red springs) | Duck Lightsaver V2 (MX red) | Duck Octogon V2 (gateron clear) (lifted pads) | Duck Orion V2 (gateron red) | Realforce R2TSLA-US4-IV | Realforce R2TLSA-US4-BK | TX 75 (gateron clear) | KBDFANS 75 ("vintage" MX blues) | Kinesis Freestyle Pro (MX red) | NIZ 84EC-S (35gr) | MS Surface Ergonomic | MS Natural Ergonomic Keyboard 4000 | Filco Majestouch 2 TKL (MX black | Phantom (Filco case) ("vintage" MX blacks | Spr1t 75% PCB x 2 (MX black and gateron clear) | Cherry G80-1865 (MX browns with black springs)

Offline dragonken

  • Posts: 96
  • Location: Hong Kong
Re: LightSaver V2 Group Buy
« Reply #848 on: Fri, 05 September 2014, 06:27:19 »
I just received and quickly install everything. By default it's all LEO turned on. Would any1 tell me how to toggle LED mode in v2? I cannot locate the MFN button -_-!

Offline witbliz

  • Posts: 120
Re: LightSaver V2 Group Buy
« Reply #849 on: Fri, 05 September 2014, 11:56:04 »
just got LS2 as well , however i would like to know what screws does those blockers use ? it didn't come with my package. Anybody able to let me know where can i buy them ?