Author Topic: [IC] TGR-Tris CE (Read 92835 times)

HTN47 · « **Reply #100 on:** Thu, 11 February 2016, 13:08:31 »

Ohhhh lawdy

I can't wait!! The design with tgr logo looks so sexy

romevi · « **Reply #101 on:** Thu, 11 February 2016, 13:09:33 »

Quote from: HTN47 on Thu, 11 February 2016, 13:08:31

The design with tgr logo looks so sexy

Dude, that's what I'm sayin'.

joey · « **Reply #102 on:** Thu, 11 February 2016, 13:10:47 »

Full bottom brass plate is

xondat · « **Reply #103 on:** Thu, 11 February 2016, 13:33:27 »

Quote from: yuktsi on Thu, 11 February 2016, 11:50:03

No renders, sorry
But I have updated the first post with the design of the board.

Show Image

Have a nice day :thumb:

The pad on the right is my favorite by a long shot.

KnivesM · « **Reply #104 on:** Thu, 11 February 2016, 16:33:36 »

Far left with the TGR logo is my favorite followed by the middle.
Looks great.

quochung1989 · « **Reply #105 on:** Thu, 11 February 2016, 19:15:16 »

I like left design with TGR logo.

FranksNewLiver · « **Reply #106 on:** Thu, 11 February 2016, 20:06:34 »

Are Jane-CE people going to be able to get in on this or is there going to be a different version?

LXXXIX · « **Reply #107 on:** Thu, 11 February 2016, 22:01:20 »

I'm totally not into numpads, but this would be cool if it had slots for USBs. Like a numpad/usb hub combo.

Personally I like the one on the left since it would compliment the TKL nicely.

KnivesM · « **Reply #108 on:** Thu, 11 February 2016, 22:15:31 »

Quote from: FranksNewLiver on Thu, 11 February 2016, 20:06:34

Are Jane-CE people going to be able to get in on this or is there going to be a different version?

I believe they will have a shot with all the other people who didn't get Jane R1. I don't think they are reserved a spot though, Yuktsi can say for certain but the updated OP makes it seem that way.

Quote from: yuktsi on Mon, 25 January 2016, 08:35:48

Quantity:
25-30 (excluding Jane R1 owners)

popkorn62 · « **Reply #109 on:** Thu, 11 February 2016, 22:16:45 »

The one with TGR logo looks soooooo good

swimmingbird · « **Reply #110 on:** Thu, 11 February 2016, 22:18:12 »

1st one (TGR logo)

naasfu · « **Reply #111 on:** Thu, 11 February 2016, 22:44:36 »

looks great so far.

for me, i like left, middle, then right. sign me up, pls.

filphil · « **Reply #112 on:** Thu, 11 February 2016, 23:40:54 »

I prefer the top branding but really don't mind between unbranded or branded. Not feeling the full top row at all but I'm sure novelty cap owners would love it.

romevi · « **Reply #113 on:** Thu, 11 February 2016, 23:43:14 »

Quote from: filphil on Thu, 11 February 2016, 23:40:54

I prefer the top branding but really don't mind between unbranded or branded. Not feeling the full top row at all but I'm sure novelty cap owners would love it.

I actually like the single switch for artisans and feel like it would make artisans glow nicely.

tuantruong · « **Reply #114 on:** Fri, 12 February 2016, 02:30:57 »

+1 for the middle one, keep it simple yet fancy look.

flopix · « **Reply #115 on:** Fri, 12 February 2016, 03:06:42 »

If we're voting, I'm for more buttons. I have a feeling that I'll use thing as a kbd extension with shortcuts and whatnot rather than just a numpad. I'd put the TGR logo on the bottom (e.g. with a plate). More for connoisseurs

pr0ximity · « **Reply #116 on:** Fri, 12 February 2016, 06:07:19 »

Have no need for one, but numpads with a lone Esc key look goofy. The full top row is fantastic, however.

daviswalkers · « **Reply #117 on:** Fri, 12 February 2016, 06:08:11 »

I'm personally a fan of either of the outer ones I like the idea of more keys but I also really like the tgr logo so I'm really torn which I want more

laden3 · « **Reply #118 on:** Fri, 12 February 2016, 09:40:51 »

The one on the right.

yuktsi · « **Reply #119 on:** Tue, 16 February 2016, 07:46:37 »

Salted egg yolk burger and some salted egg yolk fries for supper

btw, I have placed the order for prototypes today.
Also ordered the polycarbonate to make a non-aluminum one

bocahgundul · « **Reply #120 on:** Tue, 16 February 2016, 07:56:02 »

Quote from: yuktsi on Tue, 16 February 2016, 07:46:37

Salted egg yolk burger and some salted egg yolk fries for supper

Show Image

btw, I have placed the order for prototypes today.
Also ordered the polycarbonate to make a non-aluminum one :eek:

Where did you find this kind of burger on malaysia? damn that burger looks tasty :thumb:

quochung1989 · « **Reply #121 on:** Tue, 16 February 2016, 07:58:10 »

Full polycarbonate ?

Eager to see sample

yuktsi · « **Reply #122 on:** Tue, 16 February 2016, 08:04:48 »

Quote from: bocahgundul on Tue, 16 February 2016, 07:56:02

Quote from: yuktsi on Tue, 16 February 2016, 07:46:37
Salted egg yolk burger and some salted egg yolk fries for supper

Show Image

btw, I have placed the order for prototypes today.
Also ordered the polycarbonate to make a non-aluminum one :eek:
Where did you find this kind of burger on malaysia? damn that burger looks tasty :thumb:

there are lots of gourmet burger chains nowadays in Malaysia
it's like one of the fastest growing trend in F&B industry

Quote from: quochung1989 on Tue, 16 February 2016, 07:58:10

Full polycarbonate ? :eek:
Eager to see sample :p

me too!
yeah full polycarbonate!

jaffers · « **Reply #123 on:** Tue, 16 February 2016, 08:10:39 »

Nice, count me in for an aluminium one

alienman82 · « **Reply #124 on:** Tue, 16 February 2016, 09:22:43 »

removed.

FLFisherman · « **Reply #125 on:** Tue, 16 February 2016, 09:24:23 »

Quote from: alienman82 on Tue, 16 February 2016, 09:22:43

I have a sweet set of caps for a numpad but will I get in on this? Probably not.

I don't quite understand the $180-200 price point. Why so high?

alienman82 · « **Reply #126 on:** Tue, 16 February 2016, 09:40:36 »

removed.

FLFisherman · « **Reply #127 on:** Tue, 16 February 2016, 09:43:47 »

Quote from: alienman82 on Tue, 16 February 2016, 09:40:36

Quote from: FLFisherman on Tue, 16 February 2016, 09:24:23
Quote from: alienman82 on Tue, 16 February 2016, 09:22:43
I have a sweet set of caps for a numpad but will I get in on this? Probably not.

I don't quite understand the $180-200 price point. Why so high?

I think it's fine. Just a lot of work and design into it. Materials alone will always make it cost more.

Ahh, like the brass plate and most-likely aluminium case?

xondat · « **Reply #128 on:** Tue, 16 February 2016, 09:48:40 »

Quote from: FLFisherman on Tue, 16 February 2016, 09:24:23

Quote from: alienman82 on Tue, 16 February 2016, 09:22:43
I have a sweet set of caps for a numpad but will I get in on this? Probably not.

I don't quite understand the $180-200 price point. Why so high?

This is the only thing - it's high up there for what I would pay, but then again I can't act like there are a lot of Korean numpads.

calmfries · « **Reply #129 on:** Tue, 16 February 2016, 09:51:39 »

CNC is not cheap though

Dreamre · « **Reply #130 on:** Tue, 16 February 2016, 10:06:30 »

Middle or far right!

yuktsi · « **Reply #131 on:** Tue, 16 February 2016, 10:14:56 »

Quote from: FLFisherman on Tue, 16 February 2016, 09:43:47

Quote from: alienman82 on Tue, 16 February 2016, 09:40:36

Quote from: FLFisherman on Tue, 16 February 2016, 09:24:23
Quote from: alienman82 on Tue, 16 February 2016, 09:22:43
I have a sweet set of caps for a numpad but will I get in on this? Probably not.

I don't quite understand the $180-200 price point. Why so high?

I think it's fine. Just a lot of work and design into it. Materials alone will always make it cost more.

Ahh, like the brass plate and most-likely aluminium case?

the material itself doesn't cost much but the machining and handling do.
remember it's a 2 parts case, where the switch plate is mounted to the top half
it's rather tricky as you want to keep them as seamless as possible
would be much much cheaper if the case is only 1 part (like most of the 60% case and numpad out there)

alienman82 · « **Reply #132 on:** Tue, 16 February 2016, 10:19:24 »

removed.

HoffmanMyster · « **Reply #133 on:** Tue, 16 February 2016, 10:19:25 »

You're paying for machine and setup time, which won't vary a whole lot between a TKL and numpad. While we as enthusiasts may not "value" numpads as much as a TKL, the machine shop sees a nearly-equal job in terms of machining. This is obviously over-simplifying things, but the general idea is there.

HTN47 · « **Reply #134 on:** Tue, 16 February 2016, 13:42:34 »

I think the $200 price range is quite fair or even cheap tbh... I've tried to order a prototype for an aluminum lamp I was working on and the quotes I was given ranged from $400-700... Some shops even charged me just for a quote and some advices

But that's in the US maybe it's cheaper in Malaysia
In case you're wondering, my lamp was literally just an aluminum rod and a shell, not some crazy fancy design

pichu23 · « **Reply #135 on:** Tue, 16 February 2016, 19:10:09 »

Quote from: yuktsi on Wed, 10 February 2016, 08:04:25

I promise I will post the renders by the end of tmr. Burger now

Show Image

Quote from: yuktsi on Tue, 16 February 2016, 07:46:37

Salted egg yolk burger and some salted egg yolk fries for supper :thumb:

Show Image

btw, I have placed the order for prototypes today.
Also ordered the polycarbonate to make a non-aluminum one

Seapark or Sunway? Haha
I do miss burgerlab at times =/

alienman82 · « **Reply #136 on:** Tue, 16 February 2016, 19:32:43 »

removed.

pichu23 · « **Reply #137 on:** Tue, 16 February 2016, 19:35:39 »

Quote from: alienman82 on Tue, 16 February 2016, 19:32:43

Quote from: pichu23 on Tue, 16 February 2016, 19:10:09
Quote from: yuktsi on Wed, 10 February 2016, 08:04:25
I promise I will post the renders by the end of tmr. Burger now

Show Image

Quote from: yuktsi on Tue, 16 February 2016, 07:46:37
Salted egg yolk burger and some salted egg yolk fries for supper :thumb:

Show Image

btw, I have placed the order for prototypes today.
Also ordered the polycarbonate to make a non-aluminum one

Seapark or Sunway? Haha
I do miss burgerlab at times =/

are there non-muslim friendly burger joints?

Sure do!, this one here is pretty decent: http://fatboys.my/speciality-burgers/

zennasyndroxx · « **Reply #138 on:** Wed, 17 February 2016, 06:45:58 »

Hi, this is THE inspiration.

This post is not off topic.

swimmingbird · « **Reply #139 on:** Wed, 17 February 2016, 07:02:19 »

Quote from: zennasyndroxx on Wed, 17 February 2016, 06:45:58

Hi, this is THE inspiration.

This post is not off topic.

Show Image

stalker board

zennasyndroxx · « **Reply #140 on:** Wed, 17 February 2016, 07:08:38 »

This is tris btw

bocahgundul · « **Reply #141 on:** Wed, 17 February 2016, 07:22:14 »

Quote from: zennasyndroxx on Wed, 17 February 2016, 07:08:38

This is tris btw

so where's jane?

HoffmanMyster · « **Reply #142 on:** Wed, 17 February 2016, 07:34:10 »

Are these boards named after people you're creeping on?

yuktsi · « **Reply #143 on:** Wed, 17 February 2016, 07:59:43 »

Quote from: HoffmanMyster on Wed, 17 February 2016, 07:34:10

Are these boards named after people you're creeping on?

real man doesn't creep

romevi · « **Reply #144 on:** Wed, 17 February 2016, 09:36:10 »

My board's a creep. It's a weirdo. What the hell is it doing here? It doesn't belong here...

HoffmanMyster · « **Reply #145 on:** Wed, 17 February 2016, 09:54:56 »

Quote from: romevi on Wed, 17 February 2016, 09:36:10

My board's a creep. It's a weirdo. What the hell is it doing here? It doesn't belong here...

You're so ****in' special
I wish I was special

azhdar · « **Reply #146 on:** Wed, 17 February 2016, 10:11:35 »

Quote from: HoffmanMyster on Wed, 17 February 2016, 09:54:56

Quote from: romevi on Wed, 17 February 2016, 09:36:10
My board's a creep. It's a weirdo. What the hell is it doing here? It doesn't belong here...

You're so ****in' special
I wish I was special

you don't belong here :|

naasfu · « **Reply #147 on:** Wed, 17 February 2016, 20:15:40 »

this could be a numpad dedicated to stalking hoff, and i would still want one.

Steezus · « **Reply #148 on:** Wed, 17 February 2016, 20:17:00 »

Quote from: naasfu on Wed, 17 February 2016, 20:15:40

this could be a numpad dedicated to stalking hoff, and i would still want one.

TGR-Hoff, definitely would buy.

hwood34 · « **Reply #149 on:** Wed, 17 February 2016, 20:36:10 »

The middle or left ones are definitely best. I dunno, I kinda want a matching logo numpad to go with the board, feels more like a pair that way

News:

Author Topic: [IC] TGR-Tris CE (Read 92835 times)