Author Topic: [IC] TGR-Tris CE (Read 92829 times)

icyskyz · « **Reply #250 on:** Sat, 19 March 2016, 08:43:57 »

Quote from: romevi on Sat, 19 March 2016, 08:08:07

yuktsi, is that one of your designs currently on Massdrop?

I believe it is made by a group of keyboard enthusiasts from China. Those pads are actually pretty good.

romevi · « **Reply #251 on:** Sat, 19 March 2016, 08:56:54 »

Quote from: icyskyz on Sat, 19 March 2016, 08:43:57

Quote from: romevi on Sat, 19 March 2016, 08:08:07
yuktsi, is that one of your designs currently on Massdrop?
I believe it is made by a group of keyboard enthusiasts from China. Those pads are actually pretty good.

It looks really nice and clean.

codywanks · « **Reply #252 on:** Sat, 19 March 2016, 09:03:20 »

Quote from: romevi on Sat, 19 March 2016, 08:08:07

yuktsi, is that one of your designs currently on Massdrop?

that was what I thought as well.... but Revo? naaah

yuktsi · « **Reply #253 on:** Sat, 19 March 2016, 12:41:20 »

Quote from: romevi on Sat, 19 March 2016, 08:08:07

yuktsi, is that one of your designs currently on Massdrop?

That's mine. I believe I can produce something better.
All I need now is just a reliable factory for anodizing.

Haih.

hwood34 · « **Reply #254 on:** Sat, 19 March 2016, 12:42:11 »

Quote from: yuktsi on Wed, 16 March 2016, 22:15:10

haih, the project will be delayed until I find a good anodizing factory.
I am seeing a factory who does anodizing for Canon camera housing on next Monday
Hopefully they are interested in such small quantity
fingers crossed

Interesting, fingers crossed

romevi · « **Reply #255 on:** Sat, 19 March 2016, 14:37:16 »

Quote from: yuktsi on Sat, 19 March 2016, 12:41:20

Quote from: romevi on Sat, 19 March 2016, 08:08:07
yuktsi, is that one of your designs currently on Massdrop?
That's mine. I believe I can produce something better.
All I need now is just a reliable factory for anodizing.

Haih.

Nice. Will the Tris have an RGB diffuser?

codywanks · « **Reply #256 on:** Sat, 19 March 2016, 16:29:45 »

Quote from: yuktsi on Sat, 19 March 2016, 12:41:20

That's mine. I believe I can produce something better.
All I need now is just a reliable factory for anodizing.

Haih.

did they at least get your permission to use the CAD files?

yuktsi · « **Reply #257 on:** Sat, 19 March 2016, 19:32:39 »

Quote from: codywanks on Sat, 19 March 2016, 16:29:45

Quote from: yuktsi on Sat, 19 March 2016, 12:41:20
That's mine. I believe I can produce something better.
All I need now is just a reliable factory for anodizing.

Haih.

did they at least get your permission to use the CAD files?

Not mine. No one has my pad drawings. From the interior design, theirs is based on the kpad I think. But the gaps and usb cutout, hmmmm

mrboovn · « **Reply #258 on:** Sat, 19 March 2016, 22:58:36 »

^ that was what i had thought when i saw the revo pad,kpad and your design

yuktsi · « **Reply #259 on:** Mon, 21 March 2016, 02:18:36 »

Just came back from the factory that does anodizing/finishing for Canon, Sony, Shimano... I've shown them boards like the Jane, dolphin, Tx1800 and 456gt. I wasn't allowed to take any photos, but their factory setup is pretty impressive. Color matching of parts is not an issue according to them, also the surface roughness can all be controlled using chemical polishing. However, the boss is only interested if only boards are machined by his another JV company.

I am visiting his machining factory tomorrow. Then will only work out in the MOQ and price.

this is the only one i got from the visit =///

romevi · « **Reply #260 on:** Mon, 21 March 2016, 07:40:39 »

Quote from: yuktsi on Mon, 21 March 2016, 02:18:36

Just came back from the factory that does anodizing/finishing for Canon, Sony, Shimano... I've shown them boards like the Jane, dolphin, Tx1800 and 456gt. I wasn't allowed to take any photos, but their factory setup is pretty impressive. Color matching of parts is not an issue according to them, also the surface roughness can all be controlled using chemical polishing. However, the boss is only interested if only boards are machined by his another JV company.

I am visiting his machining factory tomorrow. Then will only work out in the MOQ and price.

Show Image

this is the only one i got from the visit =///

Nice work!

hwood34 · « **Reply #261 on:** Mon, 21 March 2016, 09:59:04 »

Quote from: yuktsi on Mon, 21 March 2016, 02:18:36

Just came back from the factory that does anodizing/finishing for Canon, Sony, Shimano... I've shown them boards like the Jane, dolphin, Tx1800 and 456gt. I wasn't allowed to take any photos, but their factory setup is pretty impressive. Color matching of parts is not an issue according to them, also the surface roughness can all be controlled using chemical polishing. However, the boss is only interested if only boards are machined by his another JV company.

I am visiting his machining factory tomorrow. Then will only work out in the MOQ and price.

Show Image

this is the only one i got from the visit =///

Awesome news, excited for more updates!

yuktsi · « **Reply #262 on:** Mon, 21 March 2016, 10:46:31 »

Not a pad but something larger

romevi · « **Reply #263 on:** Mon, 21 March 2016, 10:48:25 »

Quote from: yuktsi on Mon, 21 March 2016, 10:46:31

Not a pad but something larger

Show Image

Show Image

Looks very clean compared to other keyboards with the same layout.

toidbb · « **Reply #264 on:** Mon, 21 March 2016, 11:00:48 »

Quote from: yuktsi on Mon, 21 March 2016, 10:46:31

Not a pad but something larger

Show Image

Show Image

That looks great, it seems like a good layout as well.

HoffmanMyster · « **Reply #265 on:** Mon, 21 March 2016, 16:28:18 »

I love that 65%.

Cool to hear the progress about finding a new shop as well, thank you for updating us so much.

HPE1000 · « **Reply #266 on:** Mon, 21 March 2016, 16:38:25 »

Quote from: yuktsi on Mon, 21 March 2016, 10:46:31

Not a pad but something larger

Show Image

Show Image

910 represent xD

thats my area code

Looks nice

alienman82 · « **Reply #267 on:** Mon, 21 March 2016, 16:47:07 »

removed.

KnivesM · « **Reply #268 on:** Mon, 21 March 2016, 17:29:13 »

Quote from: yuktsi on Mon, 21 March 2016, 10:46:31

Not a pad but something larger

Show Image

Show Image

Oooh very nice, excited to hear how the visit to the machining shop goes.

dannrawr · « **Reply #269 on:** Wed, 23 March 2016, 21:25:43 »

Quote from: yuktsi on Mon, 21 March 2016, 10:46:31

Not a pad but something larger

Show Image

Show Image

always winning bro

bocahgundul · « **Reply #270 on:** Fri, 25 March 2016, 05:01:09 »

I pray to god that I didn't miss the GB for that 65% cause I missed both the jane GB

limitz · « **Reply #271 on:** Fri, 25 March 2016, 18:03:49 »

I like the middle design the best, nice and clean.

Full 4 keys on the top makes it feel too cluttered, too gridlike.

As for the left design, I feel like if there's too many logos, especially paired with R1/CE. The two logos at once makes the setup seem too cluttered, a bit messy and gaudy.

switchnollie · « **Reply #272 on:** Fri, 25 March 2016, 18:15:40 »

That 65% is amazing, nice to see something besides a TKL in the high quality metal custom keyboard category

alienman82 · « **Reply #273 on:** Sat, 26 March 2016, 23:37:09 »

removed.

bocahgundul · « **Reply #274 on:** Sat, 26 March 2016, 23:38:13 »

Quote from: alienman82 on Sat, 26 March 2016, 23:37:09

Quote from: bocahgundul on Fri, 25 March 2016, 05:01:09
I pray to god that I didn't miss the GB for that 65% cause I missed both the jane GB

I pray that the mods add your nickname as 'the seal'

pls mods don't listen to him I'm not a seal ffs

MRod · « **Reply #275 on:** Tue, 29 March 2016, 12:57:35 »

I dig the design with the full extra row on top.

Quote from: yuktsi on Wed, 16 March 2016, 09:28:10

Quote from: sleepimonster on Wed, 16 March 2016, 08:03:16
Which PCB will fit this case , sir?
at this moment, only the txpad will fit

Where might one acquire a txpad pcb? A couple of searches didn't turn anything up.

Side observation - this thread kind of went off the rails back on page 4, huh?

daviswalkers · « **Reply #276 on:** Wed, 30 March 2016, 07:24:17 »

So I had a random question that I don't believe has been mentioned, there's a TGR-Jane, and a TGR-Jane CE, there are a few differences between them but most notably to me being the design where it's not solid on the sides (it has a "lip") now there will only be a TGR-Tris CE and it does not have that design as far as I can tell, my main question would be if that is just due to prototype designs or if that is how it will end up looking. I would assume it would be near impossible to have a similar lip design on something that is so much smaller but thought I'd ask!

swimmingbird · « **Reply #277 on:** Thu, 31 March 2016, 08:02:33 »

Cool looking 65% but that top row looks like it takes some getting used to

Tmeee · « **Reply #278 on:** Sat, 30 April 2016, 05:38:05 »

So,what will be the next TGR?A pad or a 65% layout keyboard?

NoahNHP · « **Reply #279 on:** Sat, 30 April 2016, 21:54:56 »

Quote from: Tmeee on Sat, 30 April 2016, 05:38:05

So,what will be the next TGR?A pad or a 65% layout keyboard?

i think it'll be a pad, hope so

juahenza · « **Reply #280 on:** Sat, 30 April 2016, 22:48:25 »

My bet is both gonna happen

)

hwood34 · « **Reply #281 on:** Sun, 19 June 2016, 22:47:42 »

so...

romevi · « **Reply #282 on:** Mon, 08 August 2016, 12:50:40 »

Can't wait!

romevi · « **Reply #283 on:** Wed, 31 August 2016, 14:32:12 »

yuktsi · « **Reply #284 on:** Wed, 02 November 2016, 10:59:03 »

Yeeeeeeee. I am ready!!!!

kawasaki161 · « **Reply #285 on:** Wed, 02 November 2016, 11:11:28 »

Not to be that guy, but the title is one month off.

romevi · « **Reply #286 on:** Wed, 02 November 2016, 11:38:00 »

YES! FINALLY!!!

HPE1000 · « **Reply #287 on:** Wed, 02 November 2016, 15:07:52 »

Elth · « **Reply #288 on:** Wed, 02 November 2016, 15:54:49 »

Oh boy, oh boy. Hopefully there will be a color close to the Jane CE proto I have.

ticktwo · « **Reply #289 on:** Tue, 08 November 2016, 03:09:29 »

interesting

yuktsi · « **Reply #290 on:** Tue, 08 November 2016, 08:37:33 »

this baby is heavy

cmd · « **Reply #291 on:** Tue, 08 November 2016, 08:47:06 »

HPE1000 · « **Reply #292 on:** Tue, 08 November 2016, 09:02:02 »

Quote from: yuktsi on Tue, 08 November 2016, 08:37:33

Show Image

this baby is heavy :blank:

:D

Any ideas on what colors might be offered and has a decision been made on the layout yet?

yuktsi · « **Reply #293 on:** Tue, 08 November 2016, 09:13:27 »

Quote from: HPE1000 on Tue, 08 November 2016, 09:02:02

Quote from: yuktsi on Tue, 08 November 2016, 08:37:33
Show Image

this baby is heavy :blank:
:D

Any ideas on what colors might be offered and has a decision been made on the layout yet?

This is the final layout my friend. My computer is slow, so it might take me quite awhile to render. Tris is so subtle and beautiful, I can see bright future ahead of it already.

The confirmed colors are black, grey and silver. Unfortunately for this round, there's a MOQ of 10 units for the special/uncommon colors. Special colors like violet, pink, cyan or blue grey. I still can't decide on which special color to offer. :'(

romevi · « **Reply #294 on:** Tue, 08 November 2016, 09:23:20 »

Quote from: yuktsi on Tue, 08 November 2016, 08:37:33

Show Image

this baby is heavy :blank:

Oh, my gosh--a weight. I cannot wait...

Will there be under-RGBs?

daviswalkers · « **Reply #295 on:** Tue, 08 November 2016, 11:00:26 »

Just got a Cyan 60% and have been praying for a 60% numpad if you choose that as the special color I might cry out of happiness (assuming at least 10 others will back me on it!)

HPE1000 · « **Reply #296 on:** Tue, 08 November 2016, 11:09:38 »

Quote from: yuktsi on Tue, 08 November 2016, 09:13:27

Quote from: HPE1000 on Tue, 08 November 2016, 09:02:02
Quote from: yuktsi on Tue, 08 November 2016, 08:37:33
Show Image

this baby is heavy :blank:
:D

Any ideas on what colors might be offered and has a decision been made on the layout yet?
This is the final layout my friend. My computer is slow, so it might take me quite awhile to render. Tris is so subtle and beautiful, I can see bright future ahead of it already.

Show Image

The confirmed colors are black, grey and silver. Unfortunately for this round, there's a MOQ of 10 units for the special/uncommon colors. Special colors like violet, pink, cyan or blue grey. I still can't decide on which special color to offer.

It is beautiful. I am down for either cyan or pink

drakeonyou · « **Reply #297 on:** Wed, 09 November 2016, 03:44:33 »

If only we have a 17 key version in about the same width as a Pok3r.

quochung1989 · « **Reply #298 on:** Wed, 09 November 2016, 03:50:16 »

Great render, yuktsi! I have more interesting than

juahenza · « **Reply #299 on:** Wed, 09 November 2016, 03:54:05 »

Quote from: yuktsi on Tue, 08 November 2016, 09:13:27

Quote from: HPE1000 on Tue, 08 November 2016, 09:02:02
Quote from: yuktsi on Tue, 08 November 2016, 08:37:33
Show Image

this baby is heavy :blank:
:D

Any ideas on what colors might be offered and has a decision been made on the layout yet?
This is the final layout my friend. My computer is slow, so it might take me quite awhile to render. Tris is so subtle and beautiful, I can see bright future ahead of it already.

Show Image

The confirmed colors are black, grey and silver. Unfortunately for this round, there's a MOQ of 10 units for the special/uncommon colors. Special colors like violet, pink, cyan or blue grey. I still can't decide on which special color to offer.

Cyan and pink please

)

News:

Author Topic: [IC] TGR-Tris CE (Read 92829 times)