Author Topic: [GB COMPLETE] TKC1800 Full kit, G80-1800 compatible QMK PCB, More available soon  (Read 36398 times)

0 Members and 1 Guest are viewing this topic.

Offline TheKeyCompany

  • * Vendor
  • Thread Starter
  • Posts: 416
  • Location: Detroit, MI
  • Because You Need the Feels...
    • The Key Dot Company
TKC1800 PRODUCT PAGE


Latest updates:

Plate and PCBs are in stock and ready for purchase!

Nardo Grey Raffle Form I have 7 Nardo Grey in stock. This form will stay open until Monday, invoice will be sent at random, and you will have 24 hours to check out. Orders will be shipped by the deadline.

GB is 40% fulfilled! I expect all orders to be fulfilled by June 8.

International buyers: I will be sending you all an email this weekend regarding shipping. DHL raised my rates 300% so I am unable to ship DHL for what you were charged. I will send all international buyers an email this weekend to explain the situation better and tell you what that plan / options are. Sorry for the inconvenience, Im pretty upset about this situation. A shipment that used to cost me $38 now costs over $120.


TKC1800 has started shipping! The first dozen is going out today. I expect to ship 25-30 per day from here out. Should be completed by middle of next week.
Testing went smoothly, no issues.
We have a few plates and PCBs left in stock. However, orders are going to freeze until I get everything shipped out so that I can ensure everyone gets what they ordered and we have no mix ups.
When orders open back up we will have a few restocks and some new colors. That Nardo Grey is looking mighty good!

Please excuse this transitionary time. I have moved out of my large office and into my basement to save on expenses as my wife an I recently opened a new business. I hope to still provide the level of service and quality of products you have come to expect from TKC. This buy is complicated and is going to take a little longer to ship than say, a GMK set.

190580-0
UPDATE 3/14/2018 
We currently have remaining in stock: (As of 3/14/2018)
A Stock: 
- 3 Stock Black (unpainted)   
- 4 Gloss Orange   
B Stock: 
- 4 Gloss Orange 
- 5 Matte Green 
 
PCBs and Plates will be available at group buy price until 3/23/2018. We will accept pre orders after that at a slightly higher price. Once the pre-orders are gone, you'll have to wait until we get another run made.   
 
Color Interest Check Form 
If youre interested in a kit, and were out of stock or its a color we havent made yet, please let us know using this form!   
 
The Waitlist form is now closed. As cases come back from the paint shop I will contact those who filled it out. You will have 48 hours to respond and then your spot will go to the next person in line.

On the other hand

The PCB & PLATE ARE AVAILABLE

190576-1190578-2

]The G80-1800 compatible QMK PCB is available during the GB and will remain open for a few weeks. We will stock the PCBs once they arrive. This is probably the best PCB for tinkering every released. Check out the product page!

Thanks for looking!
« Last Edit: Wed, 25 July 2018, 09:52:46 by TheKeyCompany »

Offline ghostjuggernaut

  • * Curator
  • Posts: 3534
Re: [GB] TKC1800 Full kit, 1800 PCB, Plate TAKING ORDERS
« Reply #1 on: Wed, 07 March 2018, 00:51:55 »
Approval bump  :thumb:

As always, Caveat Emptor.

Offline punkpc

  • Posts: 137
  • Location: Naptown, Indiana
Re: [GB] TKC1800 Full kit, 1800 PCB, Plate TAKING ORDERS
« Reply #2 on: Wed, 07 March 2018, 11:13:00 »
Do you have pictures of all the plate colors?

Digging through the pictures on the site I found, Orange, Purple, Black & Grey. I could not find Green, Cyan, or Red. Can you post some pictures here or on the site of them?

Offline TheKeyCompany

  • * Vendor
  • Thread Starter
  • Posts: 416
  • Location: Detroit, MI
  • Because You Need the Feels...
    • The Key Dot Company
Re: [GB] TKC1800 Full kit, 1800 PCB, Plate TAKING ORDERS
« Reply #3 on: Wed, 07 March 2018, 12:06:09 »
Do you have pictures of all the plate colors?

Digging through the pictures on the site I found, Orange, Purple, Black & Grey. I could not find Green, Cyan, or Red. Can you post some pictures here or on the site of them?

No, some of the plates arent made yet. Im going to pantone match them. So Cyan will be close match to the Dolch PAC logo, and green will be close to GKM AE green.

Hope that helps.

Offline punkpc

  • Posts: 137
  • Location: Naptown, Indiana
Re: [GB] TKC1800 Full kit, 1800 PCB, Plate TAKING ORDERS
« Reply #4 on: Wed, 07 March 2018, 12:21:16 »
Do you have pictures of all the plate colors?

Digging through the pictures on the site I found, Orange, Purple, Black & Grey. I could not find Green, Cyan, or Red. Can you post some pictures here or on the site of them?

Cyan will be close match to the Dolch PAC logo


That is what I needed! Going to be using your PCB and Plate in my Dolch PAC, so that is perfect!  :thumb:

Thanks

Offline iliketimex

  • Posts: 77
Re: [GB] TKC1800 Full kit, 1800 PCB, Plate TAKING ORDERS
« Reply #5 on: Fri, 09 March 2018, 00:49:50 »
Is the upcoming color Honda Sonic blue pearl or Sonic gray pearl? There is a difference. The blue is an intense ultramarine blue and the gray is, well, gray.

Online crtexcnndrm99

  • Posts: 341
  • Location: Brisbane, Australia
  • *profile image used without permission* ;)
Re: [GB] TKC1800 Full kit, 1800 PCB, Plate TAKING ORDERS
« Reply #6 on: Fri, 09 March 2018, 04:37:53 »
Do you have a colour sample of the Commando Green? (Did attempt to google and find it.. no success.) As you're aware, I'm waiting to order some parts too, just wanted to check the colour is what I was hoping :D
You're a smooth smoothie, you know? ~ Gaear Grimsrud

Re: [GB] TKC1800 Full kit, 1800 PCB, Plate TAKING ORDERS
« Reply #7 on: Fri, 09 March 2018, 05:13:28 »
What are those "minor imperfections" on a Matte Blue? Is it possible to order RGB LEDs or which ones should we source in case it's not?
Have you tested both underglow and in-switch LEDs together, is USB power enough? I'm asking this cause I've most likely burned UK78 using both in-switch and RGB leds and power consumption of 1800 should be more than UK78 one. I'm considering getting matte blue or Tanzanite blue for Laser.
What about color samples for plates?
« Last Edit: Fri, 09 March 2018, 05:16:09 by FearsomeCubedWarrior »

Offline TheKeyCompany

  • * Vendor
  • Thread Starter
  • Posts: 416
  • Location: Detroit, MI
  • Because You Need the Feels...
    • The Key Dot Company
Re: [GB] TKC1800 Full kit, 1800 PCB, Plate TAKING ORDERS
« Reply #8 on: Wed, 14 March 2018, 13:19:59 »
Is the upcoming color Honda Sonic blue pearl or Sonic gray pearl? There is a difference. The blue is an intense ultramarine blue and the gray is, well, gray.

Sonic Blue Pearl

191616-0

Offline TheKeyCompany

  • * Vendor
  • Thread Starter
  • Posts: 416
  • Location: Detroit, MI
  • Because You Need the Feels...
    • The Key Dot Company
Re: [GB] TKC1800 Full kit, 1800 PCB, Plate TAKING ORDERS
« Reply #9 on: Wed, 14 March 2018, 13:21:05 »
Do you have a colour sample of the Commando Green? (Did attempt to google and find it.. no success.) As you're aware, I'm waiting to order some parts too, just wanted to check the colour is what I was hoping :D

I dont, the color was called out in the PPG book at the shop as "Commando Green". Turns out, its called "Olive Green" and its a Jeep color. It looks like this

191618-0

Offline TheKeyCompany

  • * Vendor
  • Thread Starter
  • Posts: 416
  • Location: Detroit, MI
  • Because You Need the Feels...
    • The Key Dot Company
Re: [GB] TKC1800 Full kit, 1800 PCB, Plate TAKING ORDERS
« Reply #10 on: Wed, 14 March 2018, 13:26:31 »
What are those "minor imperfections" on a Matte Blue? Is it possible to order RGB LEDs or which ones should we source in case it's not?
Have you tested both underglow and in-switch LEDs together, is USB power enough? I'm asking this cause I've most likely burned UK78 using both in-switch and RGB leds and power consumption of 1800 should be more than UK78 one. I'm considering getting matte blue or Tanzanite blue for Laser.
What about color samples for plates?

Minor imperfections: Paint nibs. Small dust particles in the clear coat. In the matte colors we cannot wet sand / buff these out, so occasionally we are left with some small nibs.

RGBs: If installed in the TKC1800 case you wont see them. The pads were put on the PCB for a future design, or for use in an existing 1800 aluminum case, you know the one. The part number is WS2812B for the RGBs

Power consumption: The design we have is "dumb" in that it doesn't current limit. Unlike a BootMapper board it will allow for full tilt LEDs and RGBs.

Matte Blue and Tanzanite sold out pretty quickly. You'll have to join the waitlist if you want one of those colors, sorry.

The other plate colors I do not have color samples. The green will closely match GMK AE green (Terminal) and the cyan will match the Dolch logo color.
« Last Edit: Wed, 14 March 2018, 14:03:11 by TheKeyCompany »

Offline popkorn62

  • Posts: 405
  • Location: California
  • No keyboards for old men
    • TX KEYBOARDS
Re: [GB] TKC1800 Full kit, 1800 PCB, Plate TAKING ORDERS
« Reply #11 on: Wed, 14 March 2018, 14:15:29 »
I see 1800 I like. GL w/ the GB!

Offline unmuscular_michael

  • Posts: 44
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #12 on: Thu, 15 March 2018, 11:16:10 »
The i2c option could be pretty sweet. I am thinking of adding an accelerometer and being able to move the mouse by lifting and tilting the keyboard. Because I can.

Offline TheKeyCompany

  • * Vendor
  • Thread Starter
  • Posts: 416
  • Location: Detroit, MI
  • Because You Need the Feels...
    • The Key Dot Company
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #13 on: Thu, 15 March 2018, 17:29:12 »
The i2c option could be pretty sweet. I am thinking of adding an accelerometer and being able to move the mouse by lifting and tilting the keyboard. Because I can.

Thatís the most creative application Iíve heard yet!

DO IT

The whole point was to see what people could dream up. Report back once youíve done it!

Offline Firebolt1914

  • POM Overlord
  • Posts: 702
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #14 on: Sat, 17 March 2018, 16:54:04 »
I had heard that the PCB can replace the Leeku MX1800 PCB. Would this be correct?

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 10966
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #15 on: Sun, 18 March 2018, 22:09:06 »
I had heard that the PCB can replace the Leeku MX1800 PCB. Would this be correct?

since they're both 1800 clones i don't see why not
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (pending shipping) | Daily driver: TGR Alice

Puddsy's just a post ****

Offline ghostjuggernaut

  • * Curator
  • Posts: 3534
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #16 on: Sun, 18 March 2018, 22:14:59 »
I had heard that the PCB can replace the Leeku MX1800 PCB. Would this be correct?

since they're both 1800 clones i don't see why not

I think the main confusion was during TX1800 kin had said that the MX1800 PCB was different than the TX1800 pcb.  I purchased mine as a kit, so never got to compare the two.  Im sure somebody has the proper information somewhere, but i've personally never seen a clear answer to the question.

Offline TheKeyCompany

  • * Vendor
  • Thread Starter
  • Posts: 416
  • Location: Detroit, MI
  • Because You Need the Feels...
    • The Key Dot Company
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #17 on: Mon, 19 March 2018, 16:36:46 »
I had heard that the PCB can replace the Leeku MX1800 PCB. Would this be correct?

It should fit perfectly. TerryMathews is getting his this week and will confirm for us all.

Offline Firebolt1914

  • POM Overlord
  • Posts: 702
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #18 on: Mon, 19 March 2018, 20:48:15 »
I had heard that the PCB can replace the Leeku MX1800 PCB. Would this be correct?

It should fit perfectly. TerryMathews is getting his this week and will confirm for us all.

Great news! Will order once it is determined.

Offline TheKeyCompany

  • * Vendor
  • Thread Starter
  • Posts: 416
  • Location: Detroit, MI
  • Because You Need the Feels...
    • The Key Dot Company
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #19 on: Wed, 21 March 2018, 21:39:07 »
I had heard that the PCB can replace the Leeku MX1800 PCB. Would this be correct?

It should fit perfectly. TerryMathews is getting his this week and will confirm for us all.

Great news! Will order once it is determined.

Confirmed. It fits.

Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #20 on: Mon, 26 March 2018, 17:03:49 »
The wait list is no longer available. I was going to pull the trigger for blue one, but can't do it now(

Offline TheKeyCompany

  • * Vendor
  • Thread Starter
  • Posts: 416
  • Location: Detroit, MI
  • Because You Need the Feels...
    • The Key Dot Company
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #21 on: Mon, 26 March 2018, 17:05:36 »
The wait list is no longer available. I was going to pull the trigger for blue one, but can't do it now(

I had to close it. I opened up a new one, with the new colors we will be offering. Its linked in the post. I will try my best to fulfill in the order theyre requested.

Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #22 on: Mon, 26 March 2018, 17:07:10 »
Yeah, found it as an IC for colors, thanks.

Offline Gigamarcus

  • Posts: 3
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #23 on: Tue, 27 March 2018, 01:20:25 »
Hello, I'm a Swedish guy new to this hobby and this forum. I need a nudge in the right direction, me and a friend of mine plans on putting tohether our first custom kits together and I want my kit to have this 1800-layout so I'd like to order this kit. But I'm uncertain how to get my hands on a PCB that works for the nordic layout. Is that something I can order here or how does that work?
Thanks in advance!

Offline Vigrith

  • Posts: 1539
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #24 on: Tue, 27 March 2018, 08:40:56 »
Hello, I'm a Swedish guy new to this hobby and this forum. I need a nudge in the right direction, me and a friend of mine plans on putting tohether our first custom kits together and I want my kit to have this 1800-layout so I'd like to order this kit. But I'm uncertain how to get my hands on a PCB that works for the nordic layout. Is that something I can order here or how does that work?
Thanks in advance!

This PCB, as well as most other PCBs available with 95%+ of group buys, are perfectly fit for ISO-SE and other Nordic ISO layouts. They're fully programmable.



As you can see here, ISO (enter/split left shift) are supported, you just have to solder it in that way. Then after that, just program the PCB keys to do what you want them to do and get a keycap set that includes a NORDE kit. If you touch type you don't even need the NORDE caps, can just roll with regular ANSI (sans enter/split shift of course) or UK ISO which would make your life a lot easier when procuring custom sets.

Offline Gigamarcus

  • Posts: 3
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #25 on: Wed, 28 March 2018, 02:18:39 »
Thanks for the info man, greatly appreciated!  :)

Offline Gigamarcus

  • Posts: 3
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #26 on: Fri, 30 March 2018, 13:54:36 »
Is it still possible to place an order to get my hands on one of these beauties?

Offline GarrettSucks

  • Posts: 102
  • Location: Huntsville, Alabama
  • Be notified about extras at vip.dixiemech.com
    • Dixie Mech
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #27 on: Fri, 30 March 2018, 21:58:36 »
Is there a date announced when we will get our PCBs and plates?
DISCORD: dixiemech#8008

Offline eyedrop

  • Posts: 455
  • Location: Keeb Abyss
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #28 on: Sat, 31 March 2018, 11:56:55 »
Is it still possible to place an order to get my hands on one of these beauties?
I believe TKC is taking pre-order since the initial color cases are sold out.

Sent from my Pixel XL using Tapatalk


Offline TheKeyCompany

  • * Vendor
  • Thread Starter
  • Posts: 416
  • Location: Detroit, MI
  • Because You Need the Feels...
    • The Key Dot Company
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #29 on: Sat, 31 March 2018, 21:28:18 »
Is it still possible to place an order to get my hands on one of these beauties?

There are a few remaining in stock, both A and B stock.

Offline punkpc

  • Posts: 137
  • Location: Naptown, Indiana
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #30 on: Tue, 03 April 2018, 06:54:17 »
Any info on the OLED screen yet?



I know its a work in progress, but do you have any info to share on it yet?


Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 5094
  • Location: United Kingdom

Offline TerryMathews

  • Posts: 510
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #33 on: Tue, 03 April 2018, 14:01:40 »
Thanks. I've got some color samples I'm going to try, and I'll be posting more photos when I relist the IC at Reddit and here.

Offline unmuscular_michael

  • Posts: 44
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #34 on: Fri, 06 April 2018, 14:37:50 »
Just wanted to check if we were still on track for mid-April ship date. I saw the IC thread and it said fulfillment would happen with the initial shipment and was confused on the time table for it.

Offline buzzking00

  • Posts: 77
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #35 on: Fri, 06 April 2018, 20:12:45 »
Do you provide soldering services? Can I buy a fully built keeb?

Offline avtar

  • Posts: 473
  • Location: Toronto, Canada
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #36 on: Mon, 09 April 2018, 19:38:17 »
Do you provide soldering services? Can I buy a fully built keeb?

No, you'll have to assemble it yourself or get someone else to do so. I asked earlier in this thread.

Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #37 on: Tue, 10 April 2018, 02:42:26 »
Any insight on availability? I've filed IC for matte blue, but will be ok for black one as well.

Offline bryankoorean

  • Posts: 7
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #38 on: Wed, 11 April 2018, 08:36:31 »
Any insight on availability? I've filed IC for matte blue, but will be ok for black one as well.

3-4 months for more cases. I asked him on reddit


Sent from my iPhone using Tapatalk

Offline Mearaz

  • Posts: 27
  • Location: Singapore
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #39 on: Sun, 15 April 2018, 21:44:56 »
Any updates on when this ships? Its supposedly mid-april.

Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #40 on: Wed, 18 April 2018, 11:46:05 »
Any insight on availability? I've filed IC for matte blue, but will be ok for black one as well.

3-4 months for more cases. I asked him on reddit


Sent from my iPhone using Tapatalk

Thanks. Well I'll just wait then.

Offline pixelpusher

  • Posts: 2860
  • Location: Tennessee - USA
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #41 on: Thu, 19 April 2018, 15:41:47 »
Any updates on when this ships? Its supposedly mid-april.

I just found an update on the website:

UPDATE 4/17/18: PCBs are in production. Sample was sent to us and passed inspection. Shipment will be delayed a few weeks to early May.
« Last Edit: Thu, 19 April 2018, 15:53:49 by pixelpusher »
:)

Offline Pwner

  • * Maker
  • Posts: 534
  • Location: NY
  • soonô
    • Ion Keyboards
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #42 on: Sun, 22 April 2018, 09:59:26 »
Any updates on when this ships? Its supposedly mid-april.

I just found an update on the website:

UPDATE 4/17/18: PCBs are in production. Sample was sent to us and passed inspection. Shipment will be delayed a few weeks to early May.

Just came here to ask about the status of the PCB's.  Looking forward to rebuilding my Pac with this.  :thumb:

Offline Kavik

  • Posts: 624
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #43 on: Sat, 28 April 2018, 19:35:05 »
.

Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #44 on: Sat, 28 April 2018, 23:39:31 »
Any chance on these being restocked? Looking at that cocaine white kit


Sent from my iPhone using Tapatalk

Offline Neodeus

  • Posts: 42
  • Location: PA, USA
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #45 on: Fri, 04 May 2018, 09:28:58 »
Got an email today from TKC. It stated that there were further delays during the manufacturing of the boards and plates. New expected ship date is the end of May. Here is a copy of the mailer I got:

I wanted to personally send everyone who participated an email to give a quick update to the buy. Thank you for joining and trusting me to provide you with a kick-ass product.
The PCBs and Plates were ordered and paid in full back in March. I spoke to both factories this week and they both said expected shipment date is around May 14. I would expect everything to be in house and shipped out by the end of this month. I apologize for the delays. They have alot of holidays in China, and I sometimes wonder if they forget about them when quoting lead times!

New case shipments are coming in weekly. Currently we have some B stock kits in stock, Matte Orange and Matte Green. Soon to have some Cocaine White. Next off the press is another run of Tanzanite Blue!
TL;DR Expect to have your kit by end of May!

Offline pixelpusher

  • Posts: 2860
  • Location: Tennessee - USA
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #46 on: Fri, 04 May 2018, 09:34:21 »
Yeah I got the email.  I was wondering what holidays are impacting the production.  I thought everyone said CNY was like THE only holiday for manu. breaks in CN.  Guess not /shrug
:)

Offline unmuscular_michael

  • Posts: 44
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #47 on: Sat, 05 May 2018, 12:22:43 »
The problem stemmed from placing an order from a manufacturer who then had CNY, and when they came back they ghosted TKC and he had to find a new manufacturer. All in all it's not THAT late considering the time of year and challenges they've had.

Offline rioc

  • Posts: 983
  • Location: such Place
  • Very Text - 键盘上瘾 ____rioc industries ink.
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #48 on: Fri, 25 May 2018, 02:50:15 »
any updates on PCBs arriving / shipping out to customers?

really looking forward to get that cocain white 1800  ;D

Offline Neodeus

  • Posts: 42
  • Location: PA, USA
Re: [GB] TKC1800 Full kit, G80-1800 compatible QMK PCB, TAKING ORDERS
« Reply #49 on: Fri, 25 May 2018, 07:54:23 »
Email I got yesterday stated the following:


Good news! The PCBs and Plates have shipped from the factories! The parts should be in my possession by Friday. I plan to test a random bunch of PCBs and start fulfillment after the Memorial Day holiday weekend pending no issues. This buy will take a little longer to fulfill than a keyset buy, so expect orders to start going out the door all of next week. Orders will be shipped in the order they were placed.

New colors coming next week, and some restocks.
Audi Nardo Grey
Cocaine White
Tanzanite Blue