Author Topic: [IC] Staccato - Gasket Mount 60%  (Read 17408 times)

0 Members and 1 Guest are viewing this topic.

Offline Atredl

  • Posts: 797
  • Location: SoCal
Re: [IC] Staccato - Gasket Mount 60%
« Reply #50 on: Tue, 02 October 2018, 12:31:41 »
Really interested in this. How many other gasket mount cases are out there?
As far as I know only the OTD 356mini and the Meme are gasket mount. The 356mini is exceptionally rare and expensive. Plus it was made back in 2010. The Meme was recently run through a private group buy so there were only a handful (10?) made.

There may be more but I think these are the two most well known gasket mount boards.
don't forget the Keycult No1 and the OTD 360 corsa (I believe), though those are TKLs
There's also that GSKT-00 board, but that was a private run as well.
Oh yea, forgot about that one

Sent from my DREA100 using Tapatalk
I had no idea the No.1 was gasket mount. Good to know. Glad you both could fill in my gaps in knowledge.

Offline Etherealsound

  • Posts: 262
  • Location: Madison, WI
Re: [IC] Staccato - Gasket Mount 60%
« Reply #51 on: Tue, 02 October 2018, 13:00:51 »
Really interested in this. How many other gasket mount cases are out there?
As far as I know only the OTD 356mini and the Meme are gasket mount. The 356mini is exceptionally rare and expensive. Plus it was made back in 2010. The Meme was recently run through a private group buy so there were only a handful (10?) made.

There may be more but I think these are the two most well known gasket mount boards.
don't forget the Keycult No1 and the OTD 360 corsa (I believe), though those are TKLs

Is the 360 corsa really gasket? Didn't think it was.

Offline rioc

  • Posts: 983
  • Location: such Place
  • Very Text - 键盘上瘾 ____rioc industries ink.
Re: [IC] Staccato - Gasket Mount 60%
« Reply #52 on: Tue, 02 October 2018, 13:14:02 »
Really interested in this. How many other gasket mount cases are out there?
As far as I know only the OTD 356mini and the Meme are gasket mount. The 356mini is exceptionally rare and expensive. Plus it was made back in 2010. The Meme was recently run through a private group buy so there were only a handful (10?) made.

There may be more but I think these are the two most well known gasket mount boards.
don't forget the Keycult No1 and the OTD 360 corsa (I believe), though those are TKLs

Is the 360 corsa really gasket? Didn't think it was.
I'm probably getting the models mixed up, but there's a otd tkl which is gasket too

Sent from my DREA100 using Tapatalk


Online OfTheWild

  • * Esteemed Elder
  • Posts: 1255
  • Location: Cary, NC
  • Make things. Have fun.
    • Studios of the Wild
Re: [IC] Staccato - Gasket Mount 60%
« Reply #53 on: Tue, 02 October 2018, 17:46:56 »
a note that is marked for staccato has a dot.

Cool concept. Would love an alps plate option.
-Dana

Online Remsky

  • Posts: 221
  • Location: Portland, OR
Re: [IC] Staccato - Gasket Mount 60%
« Reply #54 on: Tue, 02 October 2018, 21:59:24 »
a note that is marked for staccato has a dot.

Cool concept. Would love an alps plate option.
Would love one too, not sure what the interest would be like tho

Offline jmdaly

  • Posts: 44
  • Location: Ottawa, Canada
Re: [IC] Staccato - Gasket Mount 60%
« Reply #55 on: Wed, 03 October 2018, 09:43:55 »
a note that is marked for staccato has a dot.

Cool concept. Would love an alps plate option.
Would love one too, not sure what the interest would be like tho

OP mentioned in the first post that he'd post a plate file. So I imagine, with that, it wouldn't be difficult to design an alps-compatible plate.

Online FunTyme

  • Formerly known as Edrylle
  • Posts: 15
  • Location: United States
Re: [IC] Staccato - Gasket Mount 60%
« Reply #56 on: Fri, 05 October 2018, 14:52:21 »
Really interested in this. Can’t wait for more updates

Online Aerizu

  • Posts: 108
  • Location: Japan
  • Professional Lurker
Re: [IC] Staccato - Gasket Mount 60%
« Reply #57 on: Sun, 07 October 2018, 07:56:10 »
Definitely interested! Rose Gold / White / Gray would be nice, along with some poly-carbonate plate  :thumb:

Offline lunr

  • Posts: 160
  • Location: Canada
Re: [IC] Staccato - Gasket Mount 60%
« Reply #58 on: Sun, 07 October 2018, 12:15:55 »
Would love to see some interesting colours like blue-grey (forgot to put that in the form) but definitely interested!

Offline NicoWilde

  • Posts: 6
  • Location: Florida
Re: [IC] Staccato - Gasket Mount 60%
« Reply #59 on: Mon, 08 October 2018, 03:06:24 »
Hope this can successfully go into a group buy, id definitely buy in!

Offline Rumai

  • Posts: 24
Re: [IC] Staccato - Gasket Mount 60%
« Reply #60 on: Sun, 14 October 2018, 14:01:29 »
Certainly interested. HHKB. Forgive my ignorance, I'm new- do you have any prior experience producing a board?

Thanks! Looking forward to future updates.

Offline dimo

  • Posts: 448
Re: [IC] Staccato - Gasket Mount 60%
« Reply #61 on: Sun, 14 October 2018, 17:04:19 »
Estimated time frame?

Offline 1023andy

  • Posts: 75
  • Location: South Korea
Re: [IC] Staccato - Gasket Mount 60%
« Reply #62 on: Sun, 14 October 2018, 20:42:45 »
I'm also interested in alps option. Do you have any plan to make some alps plate?

Offline laserbeamspewpew

  • Posts: 79
  • Location: Brooklyn
Re: [IC] Staccato - Gasket Mount 60%
« Reply #63 on: Sun, 14 October 2018, 21:58:26 »
Would a WHITE version be possible?

Offline mnpq.raven

  • Posts: 68
  • Location: Germany
Re: [IC] Staccato - Gasket Mount 60%
« Reply #64 on: Wed, 17 October 2018, 09:55:36 »
Looks really interesting, i'd be totally down if there's a dark red version and a split spacebar plate option for my DZ60

Offline ExuDeCandomble

  • Posts: 24
Re: [IC] Staccato - Gasket Mount 60%
« Reply #65 on: Wed, 17 October 2018, 19:47:41 »
Would be super interested in buying at least one of these (if there were multiple colors I wanted) in the HHKB format! Hope we can get enough interest to go to GB.

Offline LazerCat

  • Posts: 16
  • Location: Austria
Re: [IC] Staccato - Gasket Mount 60%
« Reply #66 on: Thu, 18 October 2018, 01:02:03 »
Great looking board. I know I'm not the first one to state this, but colors similar to the QXP's blue grey or some kind of velvet red would look incredibly stunning. At a price of <$300 I'd probably be in. Looking forward to the GB!  :thumb:
« Last Edit: Tue, 30 October 2018, 02:57:20 by LazerCat »

Offline longsock

  • Posts: 16
  • Location: Norway
  • goth boi clique
Re: [IC] Staccato - Gasket Mount 60%
« Reply #67 on: Wed, 24 October 2018, 05:11:07 »
i'm definitely in for this
hhkb loser

Offline fo0jin

  • Posts: 4
  • Location: Bay Area
Re: [IC] Staccato - Gasket Mount 60%
« Reply #68 on: Sun, 28 October 2018, 00:34:32 »
Would love an Alps PCB for this board  :)

Online TheMilkmen

  • Posts: 14
  • Location: MD, USA
Re: [IC] Staccato - Gasket Mount 60%
« Reply #69 on: Wed, 31 October 2018, 20:35:56 »
Now that the whole gasket mount market is coming in, how might the mounting of the gaskets on this board changes things compared to the GSKT00? From what I have seen of that it is situated between the plate and the pcb for that, but here it seems to be in the rims of the case. I would love to know more since this is one hell of a beauty and the HHKB layout looks like a dream.

Offline airlangga07

  • Posts: 68
Re: [IC] Staccato - Gasket Mount 60%
« Reply #70 on: Sun, 04 November 2018, 21:09:39 »
I am in for HHKB layout wohoo!

Offline Spaghetti

  • Posts: 24
Re: [IC] Staccato - Gasket Mount 60%
« Reply #71 on: Mon, 05 November 2018, 15:58:26 »
Alps plate would be nice

Offline kwerdenker

  • Posts: 14
Re: [IC] Staccato - Gasket Mount 60%
« Reply #72 on: Tue, 06 November 2018, 04:12:29 »
NE ISO AVAIL? - No I will not support ISO or any other layouts than what the plate shows (7u hhkb/wkl with split backspace, stepped caps, and split r shift support. If you MUST have an ISO plate, I will post a plate file here and you can get it cut with laserboost or lasergist :)

In that case, will we be able to buy the case without the ANSI plate at a reduced price? Would help a bit to offset the cost of getting a custom plate cut :)

Online tentboy

  • Posts: 13
Re: [IC] Staccato - Gasket Mount 60%
« Reply #73 on: Wed, 14 November 2018, 12:48:10 »
What sized space bar is used on the HHKB layout?

Online Mcnos

  • Posts: 383
Re: [IC] Staccato - Gasket Mount 60%
« Reply #74 on: Wed, 14 November 2018, 12:49:07 »
What sized space bar is used on the HHKB layout?
Should be 7u, it isn't a true hhkb
A cornered fox is more dangerous than a Jackal

QXP | TGR910 | (Reserved for TGR-Jane V2) | HHKB | Duck Viper V2 | KBD67 | E6V2 | (Reserved for Sakura Kyuu) | Mech27v2 | Tada68 | KBD5 | FC660M | Fjell | FC660CClueboard | X60 WKL & HHKB | Noxary 268 | AEK64 Brown Alps | KBD8X | HHKB Tofu | DC60 | Percent Canoe | YMD96




Offline laserbeamspewpew

  • Posts: 79
  • Location: Brooklyn
Re: [IC] Staccato - Gasket Mount 60%
« Reply #75 on: Mon, 26 November 2018, 13:21:57 »
Any updates?

Online Rensuya

  • Posts: 52
  • Location: NC
  • If there's brass on the field, bottom out!
    • Where I post all things nerdy and keeb related if anyone is interested. Profile image credit to Owler.
Re: [IC] Staccato - Gasket Mount 60%
« Reply #76 on: Thu, 20 December 2018, 01:54:56 »
Interested for sure, a blue-grey color would be cool.

Offline dado brat

  • Posts: 30
  • Location: Austria
Re: [IC] Staccato - Gasket Mount 60%
« Reply #77 on: Thu, 20 December 2018, 21:33:50 »
a champagne gold one would look awesome on this i think. definitely keeping an eye on this

Offline trg1234

  • Posts: 27
Re: [IC] Staccato - Gasket Mount 60%
« Reply #78 on: Fri, 21 December 2018, 01:54:37 »
Interested, def hoping for a rose gold

Online fublamchu

  • Posts: 229
  • Location: sureño
  • ㅋㅋㅋ
Re: [IC] Staccato - Gasket Mount 60%
« Reply #79 on: Fri, 21 December 2018, 02:58:30 »
Are there still plans for this to go to GB?
LZ-CE VBlacks
910-CE

Online Puddsy

  • nice
  • * Elated Elder
  • Posts: 10119
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] Staccato - Gasket Mount 60%
« Reply #80 on: Sun, 23 December 2018, 11:46:21 »
I know some photos were made, but that doesn't mean a lot these days
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (when it ships) | Daily driver: TGR Alice

Puddsy's just a post ****

Online Starston3

  • Posts: 121
  • Location: Bay Area
Re: [IC] Staccato - Gasket Mount 60%
« Reply #81 on: Sun, 23 December 2018, 11:58:02 »
Last I heard was late Q1... March or so.

Offline xondat

  • i'm not a star
  • * Maker
  • Posts: 4804
  • Location: United Kingdom
Re: [IC] Staccato - Gasket Mount 60%
« Reply #82 on: Sun, 23 December 2018, 12:03:34 »
Last I heard was late Q1... March or so.

From Kris?

Online Starston3

  • Posts: 121
  • Location: Bay Area
Re: [IC] Staccato - Gasket Mount 60%
« Reply #83 on: Sun, 23 December 2018, 12:05:27 »
Yeah. I think he posted that on the top clack discord. Though it was a while ago.

Offline mnpq.raven

  • Posts: 68
  • Location: Germany
Re: [IC] Staccato - Gasket Mount 60%
« Reply #84 on: Sun, 23 December 2018, 13:12:12 »
Yeah. I think he posted that on the top clack discord. Though it was a while ago.
It could be different now but last time i talked to Kris he mentioned a bit after Lunar New Year which is aound March so yeah

Offline onefivenine

  • Posts: 102
Re: [IC] Staccato - Gasket Mount 60%
« Reply #85 on: Sun, 23 December 2018, 15:31:46 »
Watched and form submitted.
[ mj2 | hhkb | pfu le | m60a | singa | alice | qxp ] soon™: aanzee | unikorn | xeno | qcp

Offline etong415

  • Posts: 29
Re: [IC] Staccato - Gasket Mount 60%
« Reply #86 on: Sun, 30 December 2018, 01:20:21 »
Really looking forward to this one!

Offline megaforce93

  • Posts: 718
Re: [IC] Staccato - Gasket Mount 60%
« Reply #87 on: Thu, 03 January 2019, 16:17:59 »
Can't wait!
Corsair K65 (The Original) | Corsair K63 Wireless | Razer Huntsman Elite

Offline dado brat

  • Posts: 30
  • Location: Austria
Re: [IC] Staccato - Gasket Mount 60%
« Reply #88 on: Fri, 11 January 2019, 03:30:10 »
any info on which colors to expect?

Offline livingspeedbump

  • * Exquisite Elder
  • Posts: 1541
  • Location: Raleigh, North Carolina
  • Gentlemen, a bobsled is a simple thing.
    • KeyChatter
Re: [IC] Staccato - Gasket Mount 60%
« Reply #89 on: Fri, 11 January 2019, 15:47:32 »
Interested.
<- My Collection (so far)

Offline superdoedoe

  • Posts: 293
  • Location: Straya
  • ( ͡° ͜ʖ ͡°)
Re: [IC] Staccato - Gasket Mount 60%
« Reply #90 on: Sat, 12 January 2019, 02:54:03 »
Really interested in this. How many other gasket mount cases are out there?
As far as I know only the OTD 356mini and the Meme are gasket mount. The 356mini is exceptionally rare and expensive. Plus it was made back in 2010. The Meme was recently run through a private group buy so there were only a handful (10?) made.

There may be more but I think these are the two most well known gasket mount boards.
don't forget the Keycult No1 and the OTD 360 corsa (I believe), though those are TKLs

Is the 360 corsa really gasket? Didn't think it was.
I'm probably getting the models mixed up, but there's a otd tkl which is gasket too

Sent from my DREA100 using Tapatalk

356Mini but it's a 60%.
( ͡° ͜ʖ ͡°)

Offline tex_live_utility

  • Posts: 267
Re: [IC] Staccato - Gasket Mount 60%
« Reply #91 on: Tue, 15 January 2019, 23:14:28 »
 Is the gasket going to be "tuned" for flex, or a vibration/sound isolation?

 Also if polycarbonate plates happen, I would be interested in a thick one, not 1.5mm

Online Puddsy

  • nice
  • * Elated Elder
  • Posts: 10119
  • Location: 方舟さくら丸
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] Staccato - Gasket Mount 60%
« Reply #92 on: Tue, 15 January 2019, 23:27:05 »
Is the gasket going to be "tuned" for flex, or a vibration/sound isolation?

theres some meme potential here
QFR | MJ2 TKL | "Schumiboard" | "Bulgogiboard" (Keycon 104) | MIRA SE | TGR Alice | Southpaw Fullsize (when it ships) | Daily driver: TGR Alice

Puddsy's just a post ****

Offline ReDsNoTDeAd

  • Posts: 86
  • ADK64 man
Re: [IC] Staccato - Gasket Mount 60%
« Reply #93 on: Wed, 16 January 2019, 09:04:19 »
Looking spicy

Offline thearctican

  • Posts: 63
  • Location: Philadelphia, PA
Re: [IC] Staccato - Gasket Mount 60%
« Reply #94 on: Wed, 16 January 2019, 09:41:29 »
Looking forward to GB and final details. Any idea when you'll start the GB phase?

Online ixixmmx

  • Posts: 15
  • Location: California
Re: [IC] Staccato - Gasket Mount 60%
« Reply #95 on: Wed, 16 January 2019, 14:44:12 »
I’m interested. Any idea what the weight of this case will be?

Offline dado brat

  • Posts: 30
  • Location: Austria
Re: [IC] Staccato - Gasket Mount 60%
« Reply #96 on: Thu, 17 January 2019, 14:47:54 »
would it be possible to install a 5mm brass plate with the plate file you release?

Offline tex_live_utility

  • Posts: 267
Re: [IC] Staccato - Gasket Mount 60%
« Reply #97 on: Thu, 17 January 2019, 18:29:59 »
Someone suggested that maybe the target price was too low to assure proper QC and leave buffer for mistakes. If that is indeed the case, I personally would be willing to pay a bit more to ensure this comes out good.

Offline Lormania

  • Posts: 129
  • Location: Denver
Re: [IC] Staccato - Gasket Mount 60%
« Reply #98 on: Sun, 20 January 2019, 02:04:53 »
Would also really love to see alps plates/pcb available for this!

Offline etong415

  • Posts: 29
Re: [IC] Staccato - Gasket Mount 60%
« Reply #99 on: Sun, 20 January 2019, 02:13:50 »
Will the plate support switch top removal?


Sent from my iPhone using Tapatalk