NEW USERS, READ THIS!
0 Members and 1 Guest are viewing this topic.
Believe this is the best bet, an image of the available layouts on the PCBShow ImageSent from my iPhone using Tapatalk
Quote from: William_S_Jones on Fri, 26 October 2018, 18:19:03Believe this is the best bet, an image of the available layouts on the PCBShow ImageSent from my iPhone using TapatalkPersonally, this is the 40% layout that makes the most sense. Would be very cool to have HHKB style blockers.
Quote from: MMKB on Sat, 27 October 2018, 23:06:49Quote from: William_S_Jones on Fri, 26 October 2018, 18:19:03Believe this is the best bet, an image of the available layouts on the PCBShow ImageSent from my iPhone using TapatalkPersonally, this is the 40% layout that makes the most sense. Would be very cool to have HHKB style blockers.I agree too, but don’t believe the OP is interested in offering an additional case option.Sent from my iPhone using Tapatalk
Yeah, I’m fine w/ this though, Also, if extras can be ordered, we could order an additional PCB, and create a custom HHKB type Case w/ a plate that covers the corners...Sent from my iPhone using Tapatalk
Quote from: William_S_Jones on Sat, 27 October 2018, 23:40:06Yeah, I’m fine w/ this though, Also, if extras can be ordered, we could order an additional PCB, and create a custom HHKB type Case w/ a plate that covers the corners...Sent from my iPhone using TapatalkSomething like this?Show ImageDon't mind the colors by the way ;)
Looks like a future GB!!!Sent from my iPhone using Tapatalk
It looks like the PCB mounts are the same as the JD45, is that the case?
Show ImageThe Minitomic is a 45% staggered keyboard which I've been working on over the last few months.Before getting a prototype made and opening a group buy, I'd like to get your feedback on the design.Some information:- Tray mounted design with 8 mounting points- High profile one piece anodized aluminium case- QMK compatible PCB- Brass or aluminium 1.5mm plate- European switch spacingtm (19mm)- USB-C Connector- Angle of 5 degrees- Capslock indicator under tab key- Reset button under left shift key- Fully designed by me ;DAnodization colors are to be determined, but will likely include black, silver and dark gray. The price will hopefully be around 100-150 USD for a kit which includes a case, pcb and plate.Supported layoutsThese are the supported layouts right now, but let me know if you think it's missing something! KLE linkShow ImageMore rendersShow ImageShow ImageShow ImageShow ImageThanks to janglad for the render at the top of this post The keyset shown is DSA Just Beige by PrimeKB.
Quote from: elfick on Wed, 31 October 2018, 21:10:55It looks like the PCB mounts are the same as the JD45, is that the case?No, because the switch spacing is different.
Don't know if you saw these Janglad renders in the GMK DMG IC. Show ImageShow Image
Quote from: maartenwut on Thu, 01 November 2018, 00:03:47Quote from: elfick on Wed, 31 October 2018, 21:10:55It looks like the PCB mounts are the same as the JD45, is that the case?No, because the switch spacing is different.Could you elaborate how the spacing differs? Thanks!
Quote from: MMKB on Tue, 04 December 2018, 11:49:36Quote from: maartenwut on Thu, 01 November 2018, 00:03:47Quote from: elfick on Wed, 31 October 2018, 21:10:55It looks like the PCB mounts are the same as the JD45, is that the case?No, because the switch spacing is different.Could you elaborate how the spacing differs? Thanks!I think it's because the Minitomic uses 19mm spacing, and the JD45 probably uses 19.05mm spacing.
If that's the case, I'd love to see some standard 45% PCB really -- I know I'm asking too much but it would benefit a lot from interchangeable parts just like GH60.
Any news?Out of all 40+% keeps in interest check phase, this is the most promising one because prelude has non standard stagger and lynx l50 will not support 6.25 spacebar.
Look forward to this possibly being my first 40%
Any eta on the prototypes? In my mind 45% is the most comfortable to use.Show Image