Author Topic: [IC] Duck Viper/Eagle V3  (Read 10728 times)

0 Members and 1 Guest are viewing this topic.

Offline elton5354

  • Thread Starter
  • Posts: 2198
  • Location: Canada
[IC] Duck Viper/Eagle V3
« on: Sun, 02 February 2020, 21:25:18 »
Hello!

Viper and Eagle with a design change!



You can see the rest of the gallery here: https://imgur.com/gallery/bgg3VuL

Let me know if you guys are ready for another round of Viper and Eagle.  :thumb:


Offline Fredington

  • Posts: 102
Re: [IC] Duck Viper/Eagle V3
« Reply #1 on: Sun, 02 February 2020, 21:26:43 »
Will the angle still be 10 degrees? Either way, I'm interested.

Offline N0GLUT0N

  • Posts: 69
Re: [IC] Duck Viper/Eagle V3
« Reply #2 on: Sun, 02 February 2020, 21:27:05 »
Yes yes


Sent from my iPhone using Tapatalk

Offline gnhuy91

  • Posts: 63
Re: [IC] Duck Viper/Eagle V3
« Reply #3 on: Sun, 02 February 2020, 21:29:44 »
looks great! btw do you have a discord server?

Offline Visionaire

  • Posts: 397
Re: [IC] Duck Viper/Eagle V3
« Reply #4 on: Sun, 02 February 2020, 21:30:09 »
Its happening. Is this going to be limited to 100 units as well?
« Last Edit: Sun, 02 February 2020, 21:31:54 by Visionaire »
Fan of Duck keyboards? Join our Discord server! https://discord.gg/SHcePf

Offline Dead Encryption

  • Posts: 98
  • Location: San Antonio, TX
  • Dead...
    • Twitch Channel
Re: [IC] Duck Viper/Eagle V3
« Reply #5 on: Sun, 02 February 2020, 21:32:21 »
Just when I thought I was out....they pull me back in...  :cool:

Offline donut_sauce

  • Posts: 377
Re: [IC] Duck Viper/Eagle V3
« Reply #6 on: Sun, 02 February 2020, 21:35:35 »
👀. Very interested

Offline singabore

  • Posts: 25
Re: [IC] Duck Viper/Eagle V3
« Reply #7 on: Sun, 02 February 2020, 21:38:08 »
the ride never ends bois

Offline crusader_alex

  • Posts: 99
  • Location: Greece
Re: [IC] Duck Viper/Eagle V3
« Reply #8 on: Sun, 02 February 2020, 21:49:55 »
Gib



Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11292
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] Duck Viper/Eagle V3
« Reply #9 on: Sun, 02 February 2020, 21:54:08 »
i wish i had money

will defo be picking one up on the aftermarket
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline Zeelobby

  • Posts: 346
Re: [IC] Duck Viper/Eagle V3
« Reply #10 on: Sun, 02 February 2020, 21:54:30 »
So the hotness of this is that it's 10į?

Offline mikenogo

  • Posts: 135
  • Location: Canada, ON
Re: [IC] Duck Viper/Eagle V3
« Reply #11 on: Sun, 02 February 2020, 21:57:52 »
It will be worth getting a carpal tunnel syndrome for this board.

Offline Rejeckted

  • Posts: 41
  • Location: San Diego, California
Re: [IC] Duck Viper/Eagle V3
« Reply #12 on: Sun, 02 February 2020, 22:27:47 »
Wow!  :cool:

Offline gabbbe

  • Posts: 85
  • Location: Brooklyn, NY
Re: [IC] Duck Viper/Eagle V3
« Reply #13 on: Sun, 02 February 2020, 23:40:17 »
in

Offline dRpkebs

  • Posts: 12
Re: [IC] Duck Viper/Eagle V3
« Reply #14 on: Sun, 02 February 2020, 23:53:32 »
Here we go again... I am in!

Offline dantambok

  • Posts: 811
  • Location: Philippines
Re: [IC] Duck Viper/Eagle V3
« Reply #15 on: Sun, 02 February 2020, 23:57:38 »
That side profile.. big nutt
Stuff  I have
More
2x TGR Alice / TGR 910 RE / TGR 910 CE / TGR 910 VKC / 2x TGR Jane V2 / 2x Matrix 2.0 / Matrix 2.2 / 2x Matrix 1.2OG / Lyn Whale v2 / Lyn EM7 v3 / DK Saver / Keycult No. 1/60 / Hachi / Kyuu / Duck Orion V2 / 3x TGRxSinga Unikorn / QXP / TX1800 V1 /  JER80 / TMO50 / 2x 86u / ION i69 / LZ MP / Rukia / 2x FMJ80 / TGR Jane V2 CE / UTD 360C / Matrix Project F / IDB60 / Matrix Noah / is0 

Coming soon --  MXSS / Modern M0110 / PC HBCP / Noxary 280S / Noxary XRF / LZ PhysiX / Keycult 1/60 rev1 / Lynx50 / Matrix 2.0 OG / 2x GSKT-00 / Duck Viper v3 / FLX Virgo

40 ish sets and 40ish sets in GB

Offline EXIA_00

  • Posts: 1
Re: [IC] Duck Viper/Eagle V3
« Reply #16 on: Mon, 03 February 2020, 00:15:09 »
Ah shiet here we go again

Offline epiccoderman

  • Posts: 1
Re: [IC] Duck Viper/Eagle V3
« Reply #17 on: Mon, 03 February 2020, 00:36:10 »
I want a TKL version of this so bad man

Offline lac29

  • Posts: 136
Re: [IC] Duck Viper/Eagle V3
« Reply #18 on: Mon, 03 February 2020, 00:51:53 »
Sexy stuff. Love the lighting design!

Offline grav3serker

  • Posts: 252
  • Location: California
  • graves + berserker = grav3serker
Re: [IC] Duck Viper/Eagle V3
« Reply #19 on: Mon, 03 February 2020, 00:55:38 »
yup!

Offline chowbabyloving

  • Posts: 26
  • Location: Canada
Re: [IC] Duck Viper/Eagle V3
« Reply #20 on: Mon, 03 February 2020, 01:13:34 »
yes.

will this be a mini usb pcb?

Offline _ODIN_

  • Posts: 616
Re: [IC] Duck Viper/Eagle V3
« Reply #21 on: Mon, 03 February 2020, 01:59:06 »
Very interested

Gesendet von meinem H8416 mit Tapatalk


Offline dyrdevil

  • Posts: 198
Re: [IC] Duck Viper/Eagle V3
« Reply #22 on: Mon, 03 February 2020, 02:18:06 »
Been waiting for this one. 

Offline hkiri

  • Posts: 48
Re: [IC] Duck Viper/Eagle V3
« Reply #23 on: Mon, 03 February 2020, 02:18:18 »
Gib keeb!

Offline MrTq

  • Posts: 27
Re: [IC] Duck Viper/Eagle V3
« Reply #24 on: Mon, 03 February 2020, 02:49:48 »
Love it!

Offline EnjoyMyInSec

  • Posts: 203
  • Location: France
  • Green is life.
Re: [IC] Duck Viper/Eagle V3
« Reply #25 on: Mon, 03 February 2020, 03:17:16 »
The Viper V2 is my favourite board so... I'm in for an Eagle this time !  :thumb:

I can't wait !

Offline Sissy

  • Posts: 433
  • Location: Australia
Re: [IC] Duck Viper/Eagle V3
« Reply #26 on: Mon, 03 February 2020, 03:45:11 »
I've been in this hobby since 2014 and really should have a Duck board by now so ye totally in.

Offline nguyenhimself

  • Posts: 631
Re: [IC] Duck Viper/Eagle V3
« Reply #27 on: Mon, 03 February 2020, 03:53:19 »
Love the sci-fi look.
Alps PCB and plate like the Duck Sidewinder please? Thanks!


Offline longsock

  • Posts: 20
  • Location: Norway
  • beep boop
Re: [IC] Duck Viper/Eagle V3
« Reply #28 on: Mon, 03 February 2020, 04:38:54 »
i've been waiting for so long, will be joining this!
i'm good

Offline TheArcticFox_27

  • Posts: 40
Re: [IC] Duck Viper/Eagle V3
« Reply #29 on: Mon, 03 February 2020, 06:23:30 »
My wallet is crying for help
| | |

Offline Crack85

  • Posts: 17
Re: [IC] Duck Viper/Eagle V3
« Reply #30 on: Mon, 03 February 2020, 06:35:53 »
In

Sent from my Pixel 3 XL using Tapatalk


Offline Smoff

  • Posts: 82
  • Location: Norrland
  • 817 785
    • Youtube
Re: [IC] Duck Viper/Eagle V3
« Reply #31 on: Mon, 03 February 2020, 07:40:26 »
Oh yes
Current boards: Matrix 1.2 OG | Cherry g80-1800 | Lin Whale r2 | Matrix 8xv2.0 |

Boards on the way: LZ Physix | Duck viper v3 | PC salamander |

Previous boards: BOK.CP | Duck Orion v3 | Mech27v2 | HHKB pro2 x3 | Cherry g80-11800 | NIU mini | Klippe r1 | Brutal60 | Duck Unicorn x Legend | Duck jetfire | IDB60 |

Offline nathanchere

  • Posts: 296
Re: [IC] Duck Viper/Eagle V3
« Reply #32 on: Mon, 03 February 2020, 08:51:13 »
yes.

will this be a mini usb pcb?

Goddamnit I hope not... but it looks like it from the photos linked in the original post :(

Offline fabijolo

  • Posts: 11
  • Location: Germany
  • I like expensive plastic.
Re: [IC] Duck Viper/Eagle V3
« Reply #33 on: Mon, 03 February 2020, 08:54:47 »
"let me know if you guys are ready for this" ... I was born ready!

Offline fabijolo

  • Posts: 11
  • Location: Germany
  • I like expensive plastic.
Re: [IC] Duck Viper/Eagle V3
« Reply #34 on: Mon, 03 February 2020, 08:55:43 »
Is there any info available in what usb port this is going to have ?

Offline skrunk

  • Posts: 32
[IC] Duck Viper/Eagle V3
« Reply #35 on: Mon, 03 February 2020, 09:16:33 »
ok Iím in

still same angle as V2?

Offline akacronos131

  • Posts: 3
  • Location: Miami, FL
  • uwu
Re: [IC] Duck Viper/Eagle V3
« Reply #36 on: Mon, 03 February 2020, 09:53:15 »
i'm in for sure  ;)

Offline happycamper87

  • Posts: 72
Re: [IC] Duck Viper/Eagle V3
« Reply #37 on: Mon, 03 February 2020, 10:10:34 »
ah **** here I go again

Offline ilikerustoo

  • Posts: 20
  • Location: PA, USA
Re: [IC] Duck Viper/Eagle V3
« Reply #38 on: Mon, 03 February 2020, 10:19:38 »
Super ready for this

Offline lush_bunny

  • Posts: 186
  • CLACK CLACK M**********R
Re: [IC] Duck Viper/Eagle V3
« Reply #39 on: Mon, 03 February 2020, 11:04:30 »
Colors?

Offline lbassett21

  • Posts: 13
  • Location: CT, US
Re: [IC] Duck Viper/Eagle V3
« Reply #40 on: Mon, 03 February 2020, 13:18:11 »
What an absolute beauty, super ready!
Current Collection:
https://imgur.com/a/Eeth953#9C44Y1m
R2 KBD8x 67g Holy chickies and OG Cherry Doubleshots
Kayak w/ Lubed Cherry MX Blacks and DSA Granite
AEK64 w/ Undampened, Clickmodded Cream Alps and AEKII Caps
Dactyl Manuform (WIP) w/ TBD

Offline valkyr1e

  • Posts: 35
Re: [IC] Duck Viper/Eagle V3
« Reply #41 on: Mon, 03 February 2020, 14:21:36 »
How much will it damage my bank?

Offline brln

  • Posts: 17
Re: [IC] Duck Viper/Eagle V3
« Reply #42 on: Mon, 03 February 2020, 14:55:26 »
Yes.

Offline vaughno

  • Posts: 67
  • Location: United States
Re: [IC] Duck Viper/Eagle V3
« Reply #43 on: Mon, 03 February 2020, 15:04:06 »
ok Iím in

still same angle as V2?
Do you really think it would be anything other than 11 degrees?
Unikorn | Orion v3

OTW: CRP 2.2 | Dracula | Olivia++ | GSKT-00

Offline elmo

  • Posts: 90
  • Location: Hamburg, Germany
    • homepage
Re: [IC] Duck Viper/Eagle V3
« Reply #44 on: Mon, 03 February 2020, 15:08:42 »
Oh yes!  :D

Offline botchm

  • Posts: 10
Re: [IC] Duck Viper/Eagle V3
« Reply #45 on: Mon, 03 February 2020, 15:16:13 »
I am down


Sent from my iPhone using Tapatalk

Offline clasicks

  • Formerly KeyboardUser4
  • Posts: 738
Re: [IC] Duck Viper/Eagle V3
« Reply #46 on: Mon, 03 February 2020, 16:09:46 »
yeah probably

Offline rkarp

  • Posts: 91
  • Location: Pittsburgh, PA
    • hypertext.dev
Re: [IC] Duck Viper/Eagle V3
« Reply #47 on: Mon, 03 February 2020, 17:11:05 »
Yep - I'm in.

Offline enrique.aliaga

  • Posts: 228
Re: [IC] Duck Viper/Eagle V3
« Reply #48 on: Mon, 03 February 2020, 17:22:48 »
Any chance of getting a Hot Swappable PCB?


Sent from my iPhone using Tapatalk

Online Rob27shred

  • Posts: 848
  • Location: Pittsburgh, PA
  • insane in the membrane
Re: [IC] Duck Viper/Eagle V3
« Reply #49 on: Mon, 03 February 2020, 17:26:43 »
Love the sci-fi look.
Alps PCB and plate like the Duck Sidewinder please? Thanks!

Show Image


Agreed, if this comes with the ALPS compatible PCB & plate like the Sidewinder & Raven did count me in as well! I've been sitting on a SGI Granite board I bought for the caps for too long now. Been really tempted to pick up a Sidewinder or Raven soon just for an ALPS SKCM/L build, but will wait to see if these guys will have the same support first now.

Offline skrunk

  • Posts: 32
Re: [IC] Duck Viper/Eagle V3
« Reply #50 on: Mon, 03 February 2020, 17:30:01 »
ok Iím in

still same angle as V2?
Do you really think it would be anything other than 11 degrees?

Darn, was really hoping for something lower. My CLS had 10 degrees, and even that was already pretty uncomfortable...

Offline vaughno

  • Posts: 67
  • Location: United States
Re: [IC] Duck Viper/Eagle V3
« Reply #51 on: Mon, 03 February 2020, 17:40:24 »
ok Iím in

still same angle as V2?
Do you really think it would be anything other than 11 degrees?

Darn, was really hoping for something lower. My CLS had 10 degrees, and even that was already pretty uncomfortable...
Buy it for the looks
Unikorn | Orion v3

OTW: CRP 2.2 | Dracula | Olivia++ | GSKT-00


Offline poolside

  • Posts: 776
  • Location: On the deck
Re: [IC] Duck Viper/Eagle V3
« Reply #53 on: Mon, 03 February 2020, 18:05:07 »
Yes, keep them coming!

Offline Han

  • Posts: 8
Re: [IC] Duck Viper/Eagle V3
« Reply #54 on: Mon, 03 February 2020, 20:04:29 »
Interested!



Offline Astrasa

  • Posts: 47
Re: [IC] Duck Viper/Eagle V3
« Reply #55 on: Mon, 03 February 2020, 22:05:19 »
Glad I saw this, very ready!
Kyuu | Noxary 268.2 | Quasi Alice |

Offline parityb1t

  • Posts: 98
  • Location: England
  • 60% or less \m/
Re: [IC] Duck Viper/Eagle V3
« Reply #56 on: Tue, 04 February 2020, 06:19:02 »
Been waiting for this for years since V2 :p
Alps64 w/ Orange Alps | SatanGH60 Gartistotles

Offline Iksion

  • Posts: 27
  • Location: St. Petersburg Russia
Re: [IC] Duck Viper/Eagle V3
« Reply #57 on: Tue, 04 February 2020, 07:47:20 »
Ready! :thumb: :thumb: :thumb:

Offline kconfire

  • Posts: 372
  • Location: NJ, USA
Re: [IC] Duck Viper/Eagle V3
« Reply #58 on: Tue, 04 February 2020, 09:34:02 »
Oh wow. In for one.
Keycult No.2 Classic Stainless, Keycult No.2 Contemporary Red

Offline KingOfMemes

  • Posts: 610
  • Location: Murica, the best country in the world
Re: [IC] Duck Viper/Eagle V3
« Reply #59 on: Tue, 04 February 2020, 09:47:45 »
Oh wow. In for one.
Def in for a viper
HHKB Colemak masterrace

Offline Mcnos

  • Posts: 894
    • GMK Fuyu

Offline Visionaire

  • Posts: 397
Re: [IC] Duck Viper/Eagle V3
« Reply #61 on: Tue, 04 February 2020, 10:49:04 »
What are we looking at in terms of timing for the GB to open?
Fan of Duck keyboards? Join our Discord server! https://discord.gg/SHcePf

Offline lush_bunny

  • Posts: 186
  • CLACK CLACK M**********R
Re: [IC] Duck Viper/Eagle V3
« Reply #62 on: Tue, 04 February 2020, 11:44:23 »
Are the colors decided? I'm hoping for a Red and/or E-white, depending on the GB timing and price ofc.

Offline JJ

  • Posts: 43
Re: [IC] Duck Viper/Eagle V3
« Reply #63 on: Tue, 04 February 2020, 12:10:16 »
gib

Sent from my SM-G9600 using Tapatalk


Offline Nigolski

  • Posts: 165
  • Location: HELLsinki
Re: [IC] Duck Viper/Eagle V3
« Reply #64 on: Tue, 04 February 2020, 15:02:33 »
Are the colors decided? I'm hoping for a Red and/or E-white, depending on the GB timing and price ofc.

duck usually offers only black, gray and silver colors
TGR Jane v2 ce | LZ-FE | Mira SE | FLX Virgo | HHKB pro 1 | Noxary 280 | Dolphin v3 | Dolphin linger 2017 | Duck lightsaver v3 | LZ PhysiX | Lin montage | GON NerD TKL | Polaris | Southpaw 65+ | Pain27

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11292
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] Duck Viper/Eagle V3
« Reply #65 on: Tue, 04 February 2020, 17:55:23 »
Are the colors decided? I'm hoping for a Red and/or E-white, depending on the GB timing and price ofc.

duck usually offers only black, gray and silver colors

he has offered red and blue grey in the past but yeah
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline rkarp

  • Posts: 91
  • Location: Pittsburgh, PA
    • hypertext.dev
Re: [IC] Duck Viper/Eagle V3
« Reply #66 on: Tue, 04 February 2020, 18:39:52 »
Are the colors decided? I'm hoping for a Red and/or E-white, depending on the GB timing and price ofc.

duck usually offers only black, gray and silver colors

he has offered red and blue grey in the past but yeah

Whoís gonna run the weight GB? 

Offline Zhu96

  • Posts: 17
Re: [IC] Duck Viper/Eagle V3
« Reply #67 on: Wed, 05 February 2020, 11:25:55 »
Any chance to have a hotswap pcb?

Offline amirhosein

  • Posts: 15
  • Location: Seattle
Re: [IC] Duck Viper/Eagle V3
« Reply #68 on: Wed, 05 February 2020, 16:02:17 »
Oh yes! Count me in Elton.

Re: [IC] Duck Viper/Eagle V3
« Reply #69 on: Wed, 05 February 2020, 16:27:23 »
Does anyone know when the GB will happen?

Offline hiisdesign

  • Posts: 6
Re: [IC] Duck Viper/Eagle V3
« Reply #70 on: Wed, 05 February 2020, 19:03:58 »
yes im ready

Offline slayer12

  • Posts: 9
Re: [IC] Duck Viper/Eagle V3
« Reply #71 on: Wed, 05 February 2020, 22:15:38 »
Could you make alps compatible pcb/ plate for the Viper/Eagle?

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11292
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] Duck Viper/Eagle V3
« Reply #72 on: Thu, 06 February 2020, 01:50:28 »
Does anyone know when the GB will happen?

it'll get posted in here, but generally duck ICs come up on GH about 6-8 weeks before the buy starts

but with the facilities the way they are right now, i wouldn't be surprised to hear about a delay
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline shuijiao

  • Posts: 2
  • Location: Canada
  • HHKB pro 1
Re: [IC] Duck Viper/Eagle V3
« Reply #73 on: Thu, 06 February 2020, 16:09:16 »
Nice i would be in this for sure!

Offline Kinesiologist

  • Posts: 13
Re: [IC] Duck Viper/Eagle V3
« Reply #74 on: Thu, 06 February 2020, 16:52:16 »
What type of mounting system for the plate and case? (top mount?) And estimated pricing?

Offline Visionaire

  • Posts: 397
Re: [IC] Duck Viper/Eagle V3
« Reply #75 on: Thu, 06 February 2020, 21:04:23 »
Top mount
Fan of Duck keyboards? Join our Discord server! https://discord.gg/SHcePf

Offline vsrnth

  • Posts: 41
Re: [IC] Duck Viper/Eagle V3
« Reply #76 on: Fri, 07 February 2020, 00:42:31 »
I want a TKL version of this so bad man
Me too

Sent from my SM-G975F using Tapatalk


Offline longsock

  • Posts: 20
  • Location: Norway
  • beep boop
Re: [IC] Duck Viper/Eagle V3
« Reply #77 on: Fri, 07 February 2020, 02:12:13 »
I want a TKL version of this so bad man
Me too

Sent from my SM-G975F using Tapatalk



Duck Orion V3?
i'm good

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11292
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] Duck Viper/Eagle V3
« Reply #78 on: Fri, 07 February 2020, 02:12:54 »
I want a TKL version of this so bad man
Me too

Sent from my SM-G975F using Tapatalk



Duck Orion V3?

i was gonna say that's literally the orion
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline Vadurr

  • Posts: 616
  • Location: CA
  • Valar Morghulis
Re: [IC] Duck Viper/Eagle V3
« Reply #79 on: Fri, 07 February 2020, 11:12:59 »
Any chance to get this in a sweet Polycarb version? :P

Offline higgga

  • Posts: 32
  • Location: US
Re: [IC] Duck Viper/Eagle V3
« Reply #80 on: Fri, 07 February 2020, 12:06:48 »
Any chance to get this in a sweet Polycarb version? :P

Doubt it, no indication for polycarb afaik and I doubt that changes will be made since the Korean gb started a while ago.

Offline rkarp

  • Posts: 91
  • Location: Pittsburgh, PA
    • hypertext.dev
Re: [IC] Duck Viper/Eagle V3
« Reply #81 on: Fri, 07 February 2020, 12:12:44 »
Any chance to get this in a sweet Polycarb version? :P

Doubt it, no indication for polycarb afaik and I doubt that changes will be made since the Korean gb started a while ago.

IIRC, I donít think Duck has ever done a PC case.  Iíve seen the PC plates though.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11292
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] Duck Viper/Eagle V3
« Reply #82 on: Fri, 07 February 2020, 12:37:27 »
Any chance to get this in a sweet Polycarb version? :P

Doubt it, no indication for polycarb afaik and I doubt that changes will be made since the Korean gb started a while ago.

IIRC, I donít think Duck has ever done a PC case.  Iíve seen the PC plates though.

this correct

duck's fab only does metals from what i understand
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline rkarp

  • Posts: 91
  • Location: Pittsburgh, PA
    • hypertext.dev
Re: [IC] Duck Viper/Eagle V3
« Reply #83 on: Fri, 07 February 2020, 13:15:59 »
Any chance to get this in a sweet Polycarb version? :P

Doubt it, no indication for polycarb afaik and I doubt that changes will be made since the Korean gb started a while ago.

IIRC, I donít think Duck has ever done a PC case.  Iíve seen the PC plates though.

this correct

duck's fab only does metals from what i understand

Thereís a Teaha build of a V2 Octagon with a PC bottom though that I just saw, so there might be a 3rd party option somewhere.

Offline mopaska

  • Posts: 30
Re: [IC] Duck Viper/Eagle V3
« Reply #84 on: Fri, 07 February 2020, 13:33:14 »
Any chance to get this in a sweet Polycarb version? :P

Doubt it, no indication for polycarb afaik and I doubt that changes will be made since the Korean gb started a while ago.

IIRC, I donít think Duck has ever done a PC case.  Iíve seen the PC plates though.

this correct

duck's fab only does metals from what i understand

Thereís a Teaha build of a V2 Octagon with a PC bottom though that I just saw, so there might be a 3rd party option somewhere.

There's some backstory that people like Pudsy know / can fill in - I'm too new to know the details. But the gist of it is that Duck used to offer Acrylic bottoms (different angle) and also used to offer more color options from anodizing (I am typing this from a red octagon v2 I bought on r/mechmarket). However, a production run for one of the GBs (maybe orion v2? idk) had issues: some boards had streaks in the anodizing or other production inconsistencies/defects.
After that, Duck switched fabricators? In any case - he simplified his range of offerings. I've probably grossly misrepresented the facts so I'm hoping one of the elders can chime in with the real story:)

Offline rkarp

  • Posts: 91
  • Location: Pittsburgh, PA
    • hypertext.dev
Re: [IC] Duck Viper/Eagle V3
« Reply #85 on: Fri, 07 February 2020, 13:40:10 »
Any chance to get this in a sweet Polycarb version? :P

Doubt it, no indication for polycarb afaik and I doubt that changes will be made since the Korean gb started a while ago.

IIRC, I donít think Duck has ever done a PC case.  Iíve seen the PC plates though.

this correct

duck's fab only does metals from what i understand

Thereís a Teaha build of a V2 Octagon with a PC bottom though that I just saw, so there might be a 3rd party option somewhere.

There's some backstory that people like Pudsy know / can fill in - I'm too new to know the details. But the gist of it is that Duck used to offer Acrylic bottoms (different angle) and also used to offer more color options from anodizing (I am typing this from a red octagon v2 I bought on r/mechmarket). However, a production run for one of the GBs (maybe orion v2? idk) had issues: some boards had streaks in the anodizing or other production inconsistencies/defects.
After that, Duck switched fabricators? In any case - he simplified his range of offerings. I've probably grossly misrepresented the facts so I'm hoping one of the elders can chime in with the real story:)

Oh that's cool - I had no idea.  I've been on the hunt for an Octagon / Eagle for the longest time, but every time one comes up on r/mm or GB, I literally just got into another GB - in this case, the latest offerings from kin.  One of these days though....   :))

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11292
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] Duck Viper/Eagle V3
« Reply #86 on: Fri, 07 February 2020, 14:43:57 »
duck has done acrylic bottoms but not PC, and has stopped due to high failure rate and low order rate

but yeah that's basically it

we could see it again, but duck doesn't use the same fab most other people are using now and as far as i know isn't really looking to switch
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Re: [IC] Duck Viper/Eagle V3
« Reply #87 on: Fri, 07 February 2020, 17:26:34 »
So the GB link will be posted in this topic right?

Offline KingOfMemes

  • Posts: 610
  • Location: Murica, the best country in the world
Re: [IC] Duck Viper/Eagle V3
« Reply #88 on: Fri, 07 February 2020, 17:53:10 »
So the GB link will be posted in this topic right?
Probably in the GB topic
HHKB Colemak masterrace

Offline Unick

  • Posts: 3
Re: [IC] Duck Viper/Eagle V3
« Reply #89 on: Mon, 10 February 2020, 03:46:21 »
I'm in. When will GB open?

Offline Jokuhemmo

  • Posts: 10
  • Location: Finland
Re: [IC] Duck Viper/Eagle V3
« Reply #90 on: Mon, 10 February 2020, 12:38:46 »
Count me in

Offline hiisdesign

  • Posts: 6
Re: [IC] Duck Viper/Eagle V3
« Reply #91 on: Mon, 10 February 2020, 16:18:49 »
i am in on this too.....

Offline elton5354

  • Thread Starter
  • Posts: 2198
  • Location: Canada
Re: [IC] Duck Viper/Eagle V3
« Reply #92 on: Mon, 10 February 2020, 18:45:51 »
Its happening. Is this going to be limited to 100 units as well?

100 units only

Colors?

Black and silver

Grey and Red will have conditions same as my previous buy on the Octagon V3.  I cannot guarantee the consistency of these 2 colours. If you agree to that condition, then yes, you can choose to pick that colour.

yes.

will this be a mini usb pcb?


Any chance of getting a Hot Swappable PCB?


Sent from my iPhone using Tapatalk

Love the sci-fi look.
Alps PCB and plate like the Duck Sidewinder please? Thanks!


No Alps compatible PCB unfortunately.

Offline elton5354

  • Thread Starter
  • Posts: 2198
  • Location: Canada
Re: [IC] Duck Viper/Eagle V3
« Reply #93 on: Mon, 10 February 2020, 18:48:41 »
I'm going to get this group buy started this week. I'm making the GB thread right now and probably open it on Friday.

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11292
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] Duck Viper/Eagle V3
« Reply #94 on: Mon, 10 February 2020, 19:43:46 »
I'm going to get this group buy started this week. I'm making the GB thread right now and probably open it on Friday.

hype
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline KingOfMemes

  • Posts: 610
  • Location: Murica, the best country in the world
Re: [IC] Duck Viper/Eagle V3
« Reply #95 on: Mon, 10 February 2020, 19:45:14 »
Its happening. Is this going to be limited to 100 units as well?

100 units only


Nice, can't wait to shoot my shot
HHKB Colemak masterrace

Offline Kinesiologist

  • Posts: 13
Re: [IC] Duck Viper/Eagle V3
« Reply #96 on: Mon, 10 February 2020, 21:36:12 »
Are there more info on the PCB, and the mounting of the acrylic diffusers?

for the PCB:
- is it solder pcb? (non-hotswap)
- connector type (USB-C, mini, micro)
- firmware? (QMK, VIA)

Thanks

Offline Fnzzy

  • Posts: 604
  • Location: Germany
Re: [IC] Duck Viper/Eagle V3
« Reply #97 on: Mon, 10 February 2020, 21:42:33 »
Are there more info on the PCB, and the mounting of the acrylic diffusers?

for the PCB:
- is it solder pcb? (non-hotswap)
- connector type (USB-C, mini, micro)
- firmware? (QMK, VIA)

Thanks

Probably

- Solder only PCB
- Mini USB
- O2D :(
Duck Viper | Duck Orion v2 | LZ CLS | J80 | Acrylic Tofu

Online ggmoss

  • Posts: 2
Re: [IC] Duck Viper/Eagle V3
« Reply #98 on: Tue, 11 February 2020, 04:13:19 »
any chance of 65% ??  :cool:

Offline nathanchere

  • Posts: 296
Re: [IC] Duck Viper/Eagle V3
« Reply #99 on: Tue, 11 February 2020, 04:50:54 »
Are there more info on the PCB, and the mounting of the acrylic diffusers?

for the PCB:
- is it solder pcb? (non-hotswap)
- connector type (USB-C, mini, micro)
- firmware? (QMK, VIA)

Thanks

Probably

- Solder only PCB
- Mini USB
- O2D :(

Well thank you TX60 and now Duck for helping me save money by still choosing ****ty PCBs in 2020.

Offline higgga

  • Posts: 32
  • Location: US
Re: [IC] Duck Viper/Eagle V3
« Reply #100 on: Tue, 11 February 2020, 05:50:55 »
any chance of 65% ??  :cool:

Not this time at least.  Duck is someone that is willing to mess around with new layouts so it could happen in the future.

Offline Slayer77

  • Posts: 53
  • Location: Pune, India
Re: [IC] Duck Viper/Eagle V3
« Reply #101 on: Tue, 11 February 2020, 09:28:11 »
Are there more info on the PCB, and the mounting of the acrylic diffusers?

for the PCB:
- is it solder pcb? (non-hotswap)
- connector type (USB-C, mini, micro)
- firmware? (QMK, VIA)

Thanks

Probably

- Solder only PCB
- Mini USB
- O2D :(

Well thank you TX60 and now Duck for helping me save money by still choosing ****ty PCBs in 2020.
None of this is confirmed.

Sent from my GM1911 using Tapatalk


Offline KingOfMemes

  • Posts: 610
  • Location: Murica, the best country in the world
Re: [IC] Duck Viper/Eagle V3
« Reply #102 on: Tue, 11 February 2020, 10:00:23 »
Are there more info on the PCB, and the mounting of the acrylic diffusers?

for the PCB:
- is it solder pcb? (non-hotswap)
- connector type (USB-C, mini, micro)
- firmware? (QMK, VIA)

Thanks

Probably

- Solder only PCB
- Mini USB
- O2D :(

Well thank you TX60 and now Duck for helping me save money by still choosing ****ty PCBs in 2020.
None of this is confirmed.

Sent from my GM1911 using Tapatalk
It'll be a cold day in hell before we see QMK on these PCBs lol
HHKB Colemak masterrace

Offline Slayer77

  • Posts: 53
  • Location: Pune, India
Re: [IC] Duck Viper/Eagle V3
« Reply #103 on: Tue, 11 February 2020, 14:58:25 »
Are the underglow RGB lights pre installed on the pcb or must be purchased separately and installed?

Sent from my GM1911 using Tapatalk


Offline poolside

  • Posts: 776
  • Location: On the deck
Re: [IC] Duck Viper/Eagle V3
« Reply #104 on: Tue, 11 February 2020, 16:25:26 »
Are the underglow RGB lights pre installed on the pcb or must be purchased separately and installed?

Sent from my GM1911 using Tapatalk

Those should come presoldered.

Offline self

  • Posts: 13
Re: [IC] Duck Viper/Eagle V3
« Reply #105 on: Tue, 11 February 2020, 17:08:03 »
Looks great!
Any change for WKL top?


Sent from my ONEPLUS A5010 using Tapatalk


Offline amirhosein

  • Posts: 15
  • Location: Seattle
Re: [IC] Duck Viper/Eagle V3
« Reply #106 on: Tue, 11 February 2020, 17:09:07 »
Are there more info on the PCB, and the mounting of the acrylic diffusers?

for the PCB:
- is it solder pcb? (non-hotswap)
- connector type (USB-C, mini, micro)
- firmware? (QMK, VIA)

Thanks

Probably

- Solder only PCB
- Mini USB
- O2D :(

Well thank you TX60 and now Duck for helping me save money by still choosing ****ty PCBs in 2020.
None of this is confirmed.

Sent from my GM1911 using Tapatalk
It'll be a cold day in hell before we see QMK on these PCBs lol
I mean it's winter :D

Sent from my SM-G975U1 using Tapatalk


Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11292
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] Duck Viper/Eagle V3
« Reply #107 on: Tue, 11 February 2020, 17:29:49 »
Are there more info on the PCB, and the mounting of the acrylic diffusers?

for the PCB:
- is it solder pcb? (non-hotswap)
- connector type (USB-C, mini, micro)
- firmware? (QMK, VIA)

Thanks

Probably

- Solder only PCB
- Mini USB
- O2D :(

Well thank you TX60 and now Duck for helping me save money by still choosing ****ty PCBs in 2020.
None of this is confirmed.

Sent from my GM1911 using Tapatalk

first of all his post says "probably" right at the top

second of all

http://www.kbd4u.co.kr/product/detail.html?product_no=97&cate_no=1&display_group=2

actually it is confirmed because the korean GB already happened

while the info isn't on this page, it is readily available on korean forums/chatrooms
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline vaughno

  • Posts: 67
  • Location: United States
Re: [IC] Duck Viper/Eagle V3
« Reply #108 on: Tue, 11 February 2020, 18:36:40 »
https://imgur.com/gallery/C5TjudZ

ᕙ(⇀‸↼‶)ᕗ


Sent from my iPhone using Tapatalk
Unikorn | Orion v3

OTW: CRP 2.2 | Dracula | Olivia++ | GSKT-00

Re: [IC] Duck Viper/Eagle V3
« Reply #109 on: Tue, 11 February 2020, 23:31:26 »
Will the gray andoization be the same throughout the one board, or will it have random speckles and places where the color is different from the rest of the keyboard?

Offline Puddsy

  • nice
  • * Elated Elder
  • Posts: 11292
  • Location: Campaign Trail
  • "Do you shovel to survive, or survive to shovel?"
Re: [IC] Duck Viper/Eagle V3
« Reply #110 on: Wed, 12 February 2020, 00:19:57 »
Will the gray andoization be the same throughout the one board, or will it have random speckles and places where the color is different from the rest of the keyboard?

can't know until it shows up, duck is usually pretty good about this type of stuff though
QFR | MJ2 TKL | "Bulgogiboard" (Keycon 104) | TGR Alice | Qlavier Ti/Acryl Alice

"Everything is worse, but in a barely perceptible and indefinable way" -dollartacos

Offline Slayer77

  • Posts: 53
  • Location: Pune, India
Re: [IC] Duck Viper/Eagle V3
« Reply #111 on: Wed, 12 February 2020, 00:28:06 »
Will the gray andoization be the same throughout the one board, or will it have random speckles and places where the color is different from the rest of the keyboard?

can't know until it shows up, duck is usually pretty good about this type of stuff though
Grey and Red versions came with no guarantee last run.

Sent from my GM1911 using Tapatalk


Offline cadrev

  • Posts: 7
Re: [IC] Duck Viper/Eagle V3
« Reply #112 on: Wed, 12 February 2020, 02:45:55 »
Interested!

Offline Sissy

  • Posts: 433
  • Location: Australia
Re: [IC] Duck Viper/Eagle V3
« Reply #113 on: Wed, 12 February 2020, 03:45:31 »
Will the gray andoization be the same throughout the one board, or will it have random speckles and places where the color is different from the rest of the keyboard?

can't know until it shows up, duck is usually pretty good about this type of stuff though
Grey and Red versions came with no guarantee last run.

Sent from my GM1911 using Tapatalk
Same has been said for this run so take from that what you will when picking a color.

Offline holocene

  • Posts: 10
Re: [IC] Duck Viper/Eagle V3
« Reply #114 on: Wed, 12 February 2020, 09:18:43 »
Defo!

Sent from my SM-G973F using Tapatalk


Offline volta22

  • Posts: 1
Re: [IC] Duck Viper/Eagle V3
« Reply #115 on: Wed, 12 February 2020, 21:26:11 »
Need this in my life.

Offline MMKB

  • Posts: 421
  • Location: norcal
Re: [IC] Duck Viper/Eagle V3
« Reply #116 on: Wed, 12 February 2020, 22:21:54 »
No brass weight? Hell YES!!
     

Offline SergeantRewind

  • Posts: 1
Re: [IC] Duck Viper/Eagle V3
« Reply #117 on: Thu, 13 February 2020, 08:24:45 »
I've been waiting for this! Will definitely join into the GB!

Sent from my LM-G710 using Tapatalk


Offline enrique.aliaga

  • Posts: 228
Re: [IC] Duck Viper/Eagle V3
« Reply #118 on: Thu, 13 February 2020, 08:35:57 »
GB already started. Just saying...


Sent from my iPhone using Tapatalk

Offline elmo

  • Posts: 90
  • Location: Hamburg, Germany
    • homepage
Re: [IC] Duck Viper/Eagle V3
« Reply #119 on: Thu, 13 February 2020, 08:38:32 »
GB already started. Just saying...


Sent from my iPhone using Tapatalk

It didn't start yet.
The GB thread is just up already but the countdown is still running.

Offline KingOfMemes

  • Posts: 610
  • Location: Murica, the best country in the world
Re: [IC] Duck Viper/Eagle V3
« Reply #120 on: Thu, 13 February 2020, 08:43:26 »
GB already started. Just saying...


Sent from my iPhone using Tapatalk

It didn't start yet.
The GB thread is just up already but the countdown is still running.
I mean, if we are all trying to be a little pedantic here... The Korean groupbuy ran, so technically the groupbuy is halfway done(?)
HHKB Colemak masterrace

Offline elton5354

  • Thread Starter
  • Posts: 2198
  • Location: Canada
Re: [IC] Duck Viper/Eagle V3
« Reply #121 on: Thu, 13 February 2020, 12:23:57 »
Please move all your conversations to the following thread:

https://geekhack.org/index.php?topic=104634.0

Thank you and good luck!