Have you read the geekhack TOS lately?
0 Members and 1 Guest are viewing this topic.
Thanks Elton, Duck0113 and TrueCustom!Show ImageMy Duck Eagle is built with lubed Clear switches, Mill-Max SIP sockets, switch stickers, 2x3x4mm leds and Cherry 1800 keycaps.
for those of you who've used red LEDs as your main LED (not the default red ones below the PCB), do you have to add a resistor or something? Does it work normally if you just solder the red LEDs in?Thanks!
Hmm is it still possible to lube the clear switches if I already assembled mine?
Quote from: paobit on Fri, 21 November 2014, 20:01:30Hmm is it still possible to lube the clear switches if I already assembled mine?get a tub of lube and dip the whole board in it
LOL might as well. Also when I'm trying to get a different keyboard layout..I don't see arrow key options on the 02D program? Or am I missing something?
Finally got mine soldered up!Show ImageShow Image
Quote from: elton5354 on Fri, 21 November 2014, 23:43:08Finally got mine soldered up!Show ImageShow ImageWow, Elton. That is some superb ****, son.
As for the inserts..I'm still packing them. 2/3 is done. I'm thinking of dropping them off on Monday.
Yeah they're the cyan LEDs from aliexpress. I wonder if I can replace the bottom side LEDs with these ones?As for the inserts..I'm still packing them. 2/3 is done. I'm thinking of dropping them off on Monday.
So whenever I press any row 5 key, this viper that I'm working on completely spazzes out and the key logger shows it actuating all ctrl, alt, super, space and n and b keys in a huge, lag inducing stream. How do I make with the fix?
Quote from: elton5354 on Sat, 22 November 2014, 11:12:46As for the inserts..I'm still packing them. 2/3 is done. I'm thinking of dropping them off on Monday.Excellent! The Orion will finally be complete.
Quote from: tjcaustin on Sat, 22 November 2014, 21:03:17So whenever I press any row 5 key, this viper that I'm working on completely spazzes out and the key logger shows it actuating all ctrl, alt, super, space and n and b keys in a huge, lag inducing stream. How do I make with the fix?Hmmm.Check traces? Check solder? Did you change anything for the firmware?
Quote from: adrl on Sat, 22 November 2014, 22:23:51Quote from: tjcaustin on Sat, 22 November 2014, 21:03:17So whenever I press any row 5 key, this viper that I'm working on completely spazzes out and the key logger shows it actuating all ctrl, alt, super, space and n and b keys in a huge, lag inducing stream. How do I make with the fix?Hmmm.Check traces? Check solder? Did you change anything for the firmware?Nope, no firmware changes. I've also reflowed all switches affected. The other vipers I've made so far work fine, traces I can see look fine, but I wasn't thinking to look before I put the plate on to check the top of the pcb.
Quote from: tjcaustin on Sat, 22 November 2014, 23:38:32Quote from: adrl on Sat, 22 November 2014, 22:23:51Quote from: tjcaustin on Sat, 22 November 2014, 21:03:17So whenever I press any row 5 key, this viper that I'm working on completely spazzes out and the key logger shows it actuating all ctrl, alt, super, space and n and b keys in a huge, lag inducing stream. How do I make with the fix?Hmmm.Check traces? Check solder? Did you change anything for the firmware?Nope, no firmware changes. I've also reflowed all switches affected. The other vipers I've made so far work fine, traces I can see look fine, but I wasn't thinking to look before I put the plate on to check the top of the pcb.You try what elton said?
To enter dfu mode, you have to hold caps lock while plugging in usb.
Quote from: paobit on Fri, 21 November 2014, 20:33:27LOL might as well. Also when I'm trying to get a different keyboard layout..I don't see arrow key options on the 02D program? Or am I missing something?You need to change your locale to korean to see the arrows. You can use AppLocale to change locale just for the 02d.exe
Ok, flip sees keyboard and that's fine, I can get it in bootloader, but the o2d keymapper isn't saving the hex file I create now. It says run time error '76' path not found
Quote from: tjcaustin on Sun, 23 November 2014, 17:03:43Ok, flip sees keyboard and that's fine, I can get it in bootloader, but the o2d keymapper isn't saving the hex file I create now. It says run time error '76' path not foundRename it to something else.The default naming scheme causes that.
Quote from: adrl on Sun, 23 November 2014, 17:19:18Quote from: tjcaustin on Sun, 23 November 2014, 17:03:43Ok, flip sees keyboard and that's fine, I can get it in bootloader, but the o2d keymapper isn't saving the hex file I create now. It says run time error '76' path not foundRename it to something else.The default naming scheme causes that.Now I know it isn't firmware based. Time to disassemble and check under plate.
Quote from: tjcaustin on Sun, 23 November 2014, 17:31:54Quote from: adrl on Sun, 23 November 2014, 17:19:18Quote from: tjcaustin on Sun, 23 November 2014, 17:03:43Ok, flip sees keyboard and that's fine, I can get it in bootloader, but the o2d keymapper isn't saving the hex file I create now. It says run time error '76' path not foundRename it to something else.The default naming scheme causes that.Now I know it isn't firmware based. Time to disassemble and check under plate.That's not a hardware issue. Just create a new text file and save as viper.hex then save over that file in o2d keymapper. The software has issues creating new files.
Quote from: feizor on Mon, 24 November 2014, 01:08:59Quote from: tjcaustin on Sun, 23 November 2014, 17:31:54Quote from: adrl on Sun, 23 November 2014, 17:19:18Quote from: tjcaustin on Sun, 23 November 2014, 17:03:43Ok, flip sees keyboard and that's fine, I can get it in bootloader, but the o2d keymapper isn't saving the hex file I create now. It says run time error '76' path not foundRename it to something else.The default naming scheme causes that.Now I know it isn't firmware based. Time to disassemble and check under plate.That's not a hardware issue. Just create a new text file and save as viper.hex then save over that file in o2d keymapper. The software has issues creating new files.I did that, I was able to reflash the firmware fine. Same issues, though.
Are all the diodes soldered the right way?
Something I just noticed, the caps LED is blinking what seems to be an error code and won't turn on solid when I press the caps lockCould 2 quick flashes mean a specific fault? If so, what?
Quote from: tjcaustin on Mon, 24 November 2014, 14:31:49Something I just noticed, the caps LED is blinking what seems to be an error code and won't turn on solid when I press the caps lockCould 2 quick flashes mean a specific fault? If so, what?The capslock led blinks indicate the layer you are currently on. One blink for layer one, two blinks for layer two etc. So it would seem you are currently stuck on layer two. Try using mfn(3) + 1 to get back to layer 1. ie quickly press mfn three times, holding it down the third time and pressing the number 1.
So um... those of you with Cherry profile caps (BSP or GMK) where are you getting 7u spacebars?IMSTO is the only place I can find one (and they cost a boatload for shipping 5 dollars for the spacebar and 10 for shipping)
I've shipped most of the inserts out yesterday.
Quote from: elton5354 on Tue, 25 November 2014, 18:47:09I've shipped most of the inserts out yesterday. Awesome! Now I need to decide if I should make one of my sets look frosted.
Got my inserts today, thanks Elton! Board looks a lot more complete now! Only waiting for cyan LEDs and the courage to replace the side LEDs :xShow Image Show ImageShow Image
Quote from: Joey Quinn on Wed, 26 November 2014, 12:56:57Quote from: elton5354 on Tue, 25 November 2014, 18:47:09I've shipped most of the inserts out yesterday. Awesome! Now I need to decide if I should make one of my sets look frosted.I have ordered two sets and intend to frost one of them. Should be able to post pictures when I get them.