[ON HAND, PICS INSIDE] Cream Cheese & Green 90 keyset [Add-on Kits Available!]

[boost]

I can mail you a prepaid shipping lable if need be This way you dont need to deal with paypal.

Thanks

If tsangan agrees with the people sending labels, I also can email him a PDF of a shipping label. If not then its fine as well.

Free shipping labels!?!?!? Yes please!

emptythecache & Elrick, PM went out to you both

Does this mean I can send you the shipping label for small flat rate box?

[tsangan]

No, just like I told rainb1ood just now

This is a lot more work then it will solve like I thought :|

Everyone wants their keycaps I know.

I have to respond to EVERYONE's PM, then check their order then wait for their email and make sure to print off everyone that sends THEN I have to make sure I go to the post office the date the label is scheduled for or else I can't use it. All this times X amount of times people want to do this.

With that being said yours is out for delivery today also Boost

In the end its just everyone wants THEIR keycaps, this does NOT help me

[boost]

Thanks you're the best

[i3oilermaker]

I can only imagine the amount of PMs tsagan is getting titled "DID MY KEYZ SHIP YET!!1112"

I shipped out all of the Hammer/Pi keys in 2 days and still got a lot of PMs asking if their package shipped.

Hang in there tsagan - we appreciate your efforts.

[tsangan]

I can only imagine the amount of PMs tsagan is getting titled "DID MY KEYZ SHIP YET!!1112"

I shipped out all of the Hammer/Pi keys in 2 days and still got a lot of PMs asking if their package shipped.

Hang in there tsagan - we appreciate your efforts.

Nah I know people are antsy I would be too to be very honest.

I appreciate you not blowing up on me i3oilermaker especially since I messed up your last order, which I made sure it was packed correctly this time ;<

[i3oilermaker]

I make mistakes too - Its a lot harder to complain when you see the other side of it.

[digitalleftovers]

Just received my keys about 10 min ago.  I sorted them first thing, and it looks like I have two r4 "+/=" keys and no r4 zero key.  No worries, just let me know who I should trade with and I will send the extra key to whoever needs it, and figure out who has a zero to send me. 

[tsangan]

Just received my keys about 10 min ago.  I sorted them first thing, and it looks like I have two r4 "+/=" keys and no r4 zero key.  No worries, just let me know who I should trade with and I will send the extra key to whoever needs it, and figure out who has a zero to send me. 

Oh you're the first with error, let me set up a google doc later so you can fill it out for me then ill forward it to SP to get this stuff fixed

Last time with Rag there was only like 10-15 errors

[sth]

Just got mine, and they look INCREDIBLE. Well worth the wait for me.

There is an imperfection with SP's universal spacebar mold that is not exclusive to this set.  Basically, the texture doesn't make it all the way to the right edge and the lower left corner is missing a bit too. All of my universal spacebars look like this but I did not notice until I got the cream cheese space... higher contrast or something.

Anyway if any GB organizers see this, keep that in mind if you are going to talk to SP about a full set.

[Snooter]

If there are any extra sets for this let me know. I would be interested in one.

[digitalleftovers]

Awesome, I will await the doc link.  Yeah, these do look amazing.  Better than some versions I've seen on the asian forums.  Even the front printing looks good. Good job guys!

[royalsego]

is there a way to file down the left side of the left shift & left control & capslock ?

i remember reading a while ago about how SP caps does not sit flush on the left side of filco boards, and it's happening to me right now

surely there has to be a guide?

[sth]

is there a way to file down the left side of the left shift & left control & capslock ?

i remember reading a while ago about how SP caps does not sit flush on the left side of filco boards, and it's happening to me right now

surely there has to be a guide?

Step one: apply file in a single direction, a few soft strokes at a time, then wipe off and test the fit. if it doesn't fit, do a couple more strokes.

Metal vs plastic means you are going to take off an appreciable amount of material with each stroke so be gentle.

[rainb1ood]

I received mine today as well. I'd like to thank tsangan for this awesome set!

It's on my wife's 104 Filco now

http://imgur.com/a/Y0gpQ

[boost]

Got mine aswell.

Tsang, if you have a extra tsang kit please Lmk..

Thanks for doing this gb

[misterbobster]

I just got my keys today, thanks tsangan for all the inconveniences you have to go through just so that other GHers can have their appetite for caps satisfied.

It looks amazing!

[wiredPANDA]

Thanks, tsangan!  Keys arrived today and look great. 

Now, to decide which board to put them on.  MX reds or MX clears.

[zzAaron]

are there any extra sets

[Typhaeon]

I got mine.  The Numpad + 87 key set both work fine, although stabilizers aren't fitting snugly in some keys (it honestly hasn't made much difference).  The entire set is beautiful.  Now I just need a second keyboard to use the 87 set and Tsangan kit on!

[jellowiggler]

Do you mean the white plastic stabilizer peg that fits into the key falls out or is loose?
Use a small (3-4mm^2) piece of paper, put it over top of the stem hole on the key and push the stem of the stabilizer into place (pushing the paper in with it).  The thickness of the paper will snug that right up.  It sometimes happens with 3rd party molds, like SP.

If the actual stabilizer wire isn't firm, or the key wobbles or rattles when you press it just lube the ends of the stabilizer wire where it touches the pegs on the key with dielectric grease (or silicon grease).

I wish I had the illustrated Ripster wikis to link to.  Are those up yet?

[coinophero]

My roommate got his today.  Just wondering if mine will be following soon.

[mmmty]

Where am I on the list?? 

[jdcarpe]

I think you answered your own question:

Where am I? On the list.

 

[mmmty]

I think I'm on the list 

[zzspectrez]

arrghhh....   I hate waiting...     Must be patient.

[dean0]

Anyone have theirs delivered in the UK yet?

[demik]

he hasn't done international yet.

[limmy]

I have seen some Koreans get it.

By the way, may I ask why you edited out the prices in the OP?

Are the following prices accurate?
Base set $42, Tsangan add-on kit $10.50, 10keypad add-on kit $11.50, iso add-on kit $19, universal standard 6.25 space bar $1.61, Cherry 7x space bar $5.19

[Wildcard]

I can't wait to get mine. I know I went a bit overboard, but in my opinion these are some of the best looking caps. Thanks again tsangan.

edit: Just curious what would it take for paypal to release funds at this point? I have a few contacts who work at Paypal, and depending on the situation I might be able to talk to them about taking another look at this.

Also, if it isn't too much trouble, could you let me know when these are shipped. I've been dealing with some stupid crap in my neighborhood lately and I don't want these to get stolen off my doorstep.

[tsangan]

I can't wait to get mine. I know I went a bit overboard, but in my opinion these are some of the best looking caps. Thanks again tsangan.

edit: Just curious what would it take for paypal to release funds at this point? I have a few contacts who work at Paypal, and depending on the situation I might be able to talk to them about taking another look at this.

Also, if it isn't too much trouble, could you let me know when these are shipped. I've been dealing with some stupid crap in my neighborhood lately and I don't want these to get stolen off my doorstep.

All US orders went out today

All should arrive Saturday maybe Monday if you're far from me

[vax]

All US orders went out today

All should arrive Saturday maybe Monday if you're far from me

Any rough ETA on International shipping?

[Wildcard]

All US orders went out today

All should arrive Saturday maybe Monday if you're far from me

Thanks tsangan. If you don't mind, I'll call Paypal once my order arrives to notify them that you did ship this out even with the funds being held. Maybe they'll review and release your funds?

[boost]

All US orders went out today

All should arrive Saturday maybe Monday if you're far from me

Thanks tsangan. If you don't mind, I'll call Paypal once my order arrives to notify them that you did ship this out even with the funds being held. Maybe they'll review and release your funds?

Maybe we should all do this. ^_^

[jellowiggler]

I think that is a good idea.

What a bunch of turds.  Why do they think they can freeze funds of a legit person, who not doing anything wrong.  Super annoying.

[tsangan]

Any rough ETA on International shipping?

Most are packed, just need the funds I'm not sure if you're aware of my current financial situation. The last of the US packages that went out ran me for $450 which was the bulk of the money i got for the stuff I sold sadly ;<

Thanks tsangan. If you don't mind, I'll call Paypal once my order arrives to notify them that you did ship this out even with the funds being held. Maybe they'll review and release your funds?

Maybe we should all do this. ^_^

I'm gonna call PayPal first to see what's up then we'll see if this will help. Sixty had a similar incident but they got to him before he placed the order for the product so he couldn't even prove he was going to ship something unlike me, but people called in to complain on be half of him but that didn't work out either

I think that is a good idea.

What a bunch of turds.  Why do they think they can freeze funds of a legit person, who not doing anything wrong.  Super annoying.

well the changdrew incident is the reason why PayPal doesn't like these GBs not sure if there's anything we can do haha

[pmh1410]

hi bro, do you open to sell it on left-over after finished all shipping ?

[emptythecache]

Just got mine. They are ****ing beautiful in person. Only problem is I got two `~ keys and no F1. The crippling impatience has been satisfied, but can I get an F1 key? And do you want me to mail the extra `~ back?


(****ty cell phone picture. Not actually the camera's fault, I just have terrible unsteady hands.)

[tsangan]

That sucks ;_;

Please fill out this form
https://docs.google.com/spreadsheet/viewform?formkey=dHpmRG4zOUl1eVlEaExoUkRtb0VSaUE6MQ#gid=0

I will be submitting that to Melissa to get this fixed

[mmmty]

OMG!!! It's Christmas in July. Got my CCnG today. Tsangan is back to being awesome!!! 

[tsangan]

that's a lot of space bars

[mkawa]

was tsangan ever _not_ awesome? 

[mmmty]

One can never have enough universal spacebars. Actually, it's been so long I forgot what I ordered 

tsangan is mr. awesome. Going to play with my new keycaps now. Hopefully no missing/duplicate keys like some people.

[emptythecache]

If anyone finds they have two F1s and is missing a `~, let me know and we can tradez. God I love typing on these keycaps, they so prettyz.  z's at the end of every sentencez.

[Wildcard]

I also got mine today. Might take be a bit to sort through and make sure SP didn't mix anything up.

Thanks again Tsangan, I'll make sure to contact Paypal and tell them you're not as shady as they might think

[tsangan]

If anyone finds they have two F1s and is missing a `~, let me know and we can tradez. God I love typing on these keycaps, they so prettyz.  z's at the end of every sentencez.

Please fill out this form if you cant find
https://docs.google.com/spreadsheet/viewform?formkey=dHpmRG4zOUl1eVlEaExoUkRtb0VSaUE6MQ#gid=0

[mosrael]

Got mine today! Everything was there, no probs. Thanks a bunch dude. They look great on both my Poker and my white Filco.

[yuiop]

Got mine today as well.  They look beautiful! Well worth the wait.
So glad I got two sets + tenkeys.  Now I need to get a numpad....
I'm missing a delete key and filled out the google form thingy.
Thanks Tsangan!

[Vneck]

Hi this was my first groupbuy... The capslock and left shift key both seem to be too large for my filco TKL, and as a result there is no tactile feedback when pushing down the keys [they can't fully decompress because the case is against the key]... The spacebar also seems to not fit at all, is there something i'm missing? or is this a defect? Thanks

[jdcarpe]

Hi this was my first groupbuy... The capslock and left shift key both seem to be too large for my filco TKL, and as a result there is no tactile feedback when pushing down the keys [they can't fully decompress because the case is against the key]... The spacebar also seems to not fit at all, is there something i'm missing? or is this a defect? Thanks

It's fairly common for that to happen when fitting SP keys onto a Filco. Filco's tolerances are quite high, and SP's are loose, so often the left side modifiers will not fit correctly. All you have to do is very carefully shave off a small amount of plastic from the left side of the offending keys using a file. Go very slowly and take off VERY little plastic. Then test the fit and repeat if necessary.

[mmmty]

Works great on my full size Filco.