I'd hate to, for example, buy a Teensy 3.0 if it won't work with the Teensy 2.0 firmware I plan to use.
Soarer's stuff is for the 2.0
It is my understanding that the 3x series runs at a different voltage not suitable for USB keyboards.
Teensy 3 uses 3.3v or 5v depending on how you mod it. It's useful for keyboards, haata's code runs on it.
teensy 3 uses an ARM chip teensy 2 and ++ use atmel atmega chips. ARM is a different architechure so most code that runs on teensy2 and ++ will not run on Teensy 3
Soarer's stuff is for the 2.0
It is my understanding that the 3x series runs at a different voltage not suitable for USB keyboards.
Thanks for the info. Do you happen to know if there is a difference between the 2.0 and 2.0++ other than the additional IO sockets?
Teensy 3 uses a different chip, so firmware has to be made specifically for it. Soarers runs on Teensy++ but many others only run on teensy 2.
Functionally the biggest difference is the more io pins but there are other differences too (more RAM, etc.)
Is first class international the best option for shipping keycaps overseas? When making labels on USPS.com, it only ever shows priority mail. And if so, are bubble mailers safe? I'm scared at the thought of them getting crushed somewhere in transit and them arriving to the buyer in pieces.
fcm-I is usually only a little bit cheaper than priority for international, takes longer and doesn't come with insurance. I recommend priority.
Will any plate work with a KMAC PCB, or do I need a KMAC specific plate?
Same question but about cases as well.
KMAC 1 and LE plate is sandwiched between the case, so it's specific to KMAC. KMAC 2 can be PCB mounted in which case the plate will work only if it has holes in the proper locations for screws.
In short: probably not.
About cases: if you got a plate for the case, KMAC PCB will work only if the USB is in the right location on the case.
In short: probably not.
If you had a specific case in mind you can easily tell by looking at the location of the KMAC USB jack and the USB hole location of the case. If you find one that matches, get some dimensions or location of the USB hole in which case it may work.
Note that the kmac 1 and LE PCB does not have holes in it to screw down to a case like most custom cases
Where can I buy a 6.25x space bar wire? GON's shipping is too much for a little thing like that
I'm in the US.
I got some from whiskeytango. maybe he has more.
I need to order more of them: they are popular!