NEW USERS, READ THIS!
0 Members and 8 Guests are viewing this topic.
Quote from: jdcarpe on Mon, 14 December 2015, 18:15:22Quote from: xondat on Mon, 14 December 2015, 17:45:07Quote from: jdcarpe on Mon, 14 December 2015, 16:44:37Quote from: xondat on Mon, 14 December 2015, 14:46:25SketchUp file to either STEP, IGS or PARASOLID?STEPI meant to ask a slightly different question: how to get a SketchUp file to either STEP, IGS or PARASOLID?Oh, haha. Couldn't tell ya, sorry.I don't think there is any, well not that I found a while ago. This was the biggest reason why I quit using that program.
Quote from: xondat on Mon, 14 December 2015, 17:45:07Quote from: jdcarpe on Mon, 14 December 2015, 16:44:37Quote from: xondat on Mon, 14 December 2015, 14:46:25SketchUp file to either STEP, IGS or PARASOLID?STEPI meant to ask a slightly different question: how to get a SketchUp file to either STEP, IGS or PARASOLID?Oh, haha. Couldn't tell ya, sorry.
Quote from: jdcarpe on Mon, 14 December 2015, 16:44:37Quote from: xondat on Mon, 14 December 2015, 14:46:25SketchUp file to either STEP, IGS or PARASOLID?STEPI meant to ask a slightly different question: how to get a SketchUp file to either STEP, IGS or PARASOLID?
Quote from: xondat on Mon, 14 December 2015, 14:46:25SketchUp file to either STEP, IGS or PARASOLID?STEP
SketchUp file to either STEP, IGS or PARASOLID?
What did you move to? I want to keep designing but don't want to pay for anything.
If you are a student you can also get AutoDesk software for free for three years.
Quote from: Melvang on Tue, 15 December 2015, 14:02:40Quote from: jdcarpe on Mon, 14 December 2015, 18:15:22Quote from: xondat on Mon, 14 December 2015, 17:45:07Quote from: jdcarpe on Mon, 14 December 2015, 16:44:37Quote from: xondat on Mon, 14 December 2015, 14:46:25SketchUp file to either STEP, IGS or PARASOLID?STEPI meant to ask a slightly different question: how to get a SketchUp file to either STEP, IGS or PARASOLID?Oh, haha. Couldn't tell ya, sorry.I don't think there is any, well not that I found a while ago. This was the biggest reason why I quit using that program. What did you move to? I want to keep designing but don't want to pay for anything.
Quote from: xondat on Tue, 15 December 2015, 15:32:36Quote from: Melvang on Tue, 15 December 2015, 14:02:40Quote from: jdcarpe on Mon, 14 December 2015, 18:15:22Quote from: xondat on Mon, 14 December 2015, 17:45:07Quote from: jdcarpe on Mon, 14 December 2015, 16:44:37Quote from: xondat on Mon, 14 December 2015, 14:46:25SketchUp file to either STEP, IGS or PARASOLID?STEPI meant to ask a slightly different question: how to get a SketchUp file to either STEP, IGS or PARASOLID?Oh, haha. Couldn't tell ya, sorry.I don't think there is any, well not that I found a while ago. This was the biggest reason why I quit using that program. What did you move to? I want to keep designing but don't want to pay for anything.I personally moved to the student version of SolidWorks, but I am part of a loophole that can get it for $20 with veterans discount. With that I have to email them a copy of my discharge paperwork, so that process takes a couple extra days. But I get a physical CD in the mail, which I prefer. But it doesn't come with any tech support, updates, is only a one year license, there are some features blocked, and technically you can't use it for commercial work. Though I think the standard rate for the student version is either $100 or $150. The other thing to consider, the current SolidWorks student edition will not even install on Win 10. That won't happen until SP5, my version is 2.0 and I got it a couple months ago.
Quote from: Melvang on Tue, 15 December 2015, 20:59:39Quote from: xondat on Tue, 15 December 2015, 15:32:36Quote from: Melvang on Tue, 15 December 2015, 14:02:40Quote from: jdcarpe on Mon, 14 December 2015, 18:15:22Quote from: xondat on Mon, 14 December 2015, 17:45:07Quote from: jdcarpe on Mon, 14 December 2015, 16:44:37Quote from: xondat on Mon, 14 December 2015, 14:46:25SketchUp file to either STEP, IGS or PARASOLID?STEPI meant to ask a slightly different question: how to get a SketchUp file to either STEP, IGS or PARASOLID?Oh, haha. Couldn't tell ya, sorry.I don't think there is any, well not that I found a while ago. This was the biggest reason why I quit using that program. What did you move to? I want to keep designing but don't want to pay for anything.I personally moved to the student version of SolidWorks, but I am part of a loophole that can get it for $20 with veterans discount. With that I have to email them a copy of my discharge paperwork, so that process takes a couple extra days. But I get a physical CD in the mail, which I prefer. But it doesn't come with any tech support, updates, is only a one year license, there are some features blocked, and technically you can't use it for commercial work. Though I think the standard rate for the student version is either $100 or $150. The other thing to consider, the current SolidWorks student edition will not even install on Win 10. That won't happen until SP5, my version is 2.0 and I got it a couple months ago.I just ordered my veteran's student edition today. I really hope it installs on Windows 10, as I don't have anything else. I didn't know the regular student edition sold for $150; I thought they were always $20. I'm looking forward to learning Solidworks, but damn are they proud of their software. Autodesk gives their stuff to students for free. And they are the industry standard.I looked into getting Solidworks to replace AutoCAD at work, and the quote for a single seat license was in the thousands. Just wow. Now the sales guy won't leave me alone.
GMK do a key that has a "JOKER" legend on it - where would this key have come from and what sort of purpose would it serve on a keyboard?
Quote from: swimmingbird on Tue, 15 December 2015, 21:27:46GMK do a key that has a "JOKER" legend on it - where would this key have come from and what sort of purpose would it serve on a keyboard?To my knowledge GMK does not do any custom legends. If this is GMK it might have been a proof of concept..?
Any link for a picture of the Joker key?
Quote from: ideus on Wed, 16 December 2015, 08:50:06Any link for a picture of the Joker key?Literally on the same page as I linked in the previous reply is a picture. Scroll up slightly.
Quote from: CPTBadAss on Wed, 16 December 2015, 08:54:03Quote from: ideus on Wed, 16 December 2015, 08:50:06Any link for a picture of the Joker key?Literally on the same page as I linked in the previous reply is a picture. Scroll up slightly.I found it, thank you, it is a row 1 one, isn't it?
Quote from: ideus on Wed, 16 December 2015, 09:01:55Anyone has had experience with the Cherry silencers?mason has them
Anyone has had experience with the Cherry silencers?
Quote from: alienman82 on Wed, 16 December 2015, 09:32:18Quote from: ideus on Wed, 16 December 2015, 09:01:55Anyone has had experience with the Cherry silencers?mason has themIs mason a user or a vendor or something? A little cryptic there...
sPoOky!
Are all IBM Model M/F keycaps PBT?
Do Topre switch blockers exist?
Can someone good with CAD finish my model for me? I think it'll take less than 10 minutes.
Quote from: xondat on Sat, 19 December 2015, 10:01:47Can someone good with CAD finish my model for me? I think it'll take less than 10 minutes. You may post at the making stuff together sub-forum, with what you already have, and let interested people that can help to join the thread.
Quote from: ideus on Sat, 19 December 2015, 10:14:37Quote from: xondat on Sat, 19 December 2015, 10:01:47Can someone good with CAD finish my model for me? I think it'll take less than 10 minutes. You may post at the making stuff together sub-forum, with what you already have, and let interested people that can help to join the thread.Shameless plug
I'm on my phone and trying to find threads for help in making a mould and casting a keycap but I'm not having much luck. Would anybody be able to send a link or two my way?
For keyset GBs, are you pretty much stuck with a manufacturer that already has the keyset moulds such as SP and GMK? Or are there any freely available designs that can be used with any manufacturer that does plastic moulding?
Quote from: cryptokey on Mon, 21 December 2015, 10:55:37I'm on my phone and trying to find threads for help in making a mould and casting a keycap but I'm not having much luck. Would anybody be able to send a link or two my way?https://geekhack.org/index.php?topic=67898https://geekhack.org/index.php?topic=67744https://geekhack.org/index.php?topic=62696https://geekhack.org/index.php?topic=46284http://imgur.com/a/nPuMYThese are the links I have saved when I eventually invest.
Is there a way to switch \| and ~` on the HHKB? I've looked in Karabiner, but didn't find anything.
Quote from: mason on Mon, 21 December 2015, 10:43:49Is there a way to switch \| and ~` on the HHKB? I've looked in Karabiner, but didn't find anything.i thought AutoHotKey could do that kind of stuff?(sorry if i'm wrong, never used it myself.)
Would it be possible to due some blank hhkb caps to match ctrl alts toxic? Have a special artisan on the way
He meant dye yo answer is yea but you'll have some trouble color matching dyes
Quote from: Sifo on Tue, 22 December 2015, 13:36:58He meant dye yo answer is yea but you'll have some trouble color matching dyesUgh my autocorrect detector is off. Going off to the market to replace my faulty module.
why does my samurai sound like Japanese Batman?
I recieved a GMK purple modifier set today, and I can faintly see the "backspace" text on the key, but it is an icon only legend. Is this normal? here is an album I made trying to show this the best I can. I also noticed the "Fn" key legend is a bit more grey than the rest of them.
Quote from: nickheller on Tue, 22 December 2015, 22:08:23I recieved a GMK purple modifier set today, and I can faintly see the "backspace" text on the key, but it is an icon only legend. Is this normal? here is an album I made trying to show this the best I can. I also noticed the "Fn" key legend is a bit more grey than the rest of them.That cap is a mistake aka ****ed up. Get a replacement.
Quote from: CPTBadAss on Tue, 22 December 2015, 22:19:36Quote from: nickheller on Tue, 22 December 2015, 22:08:23I recieved a GMK purple modifier set today, and I can faintly see the "backspace" text on the key, but it is an icon only legend. Is this normal? here is an album I made trying to show this the best I can. I also noticed the "Fn" key legend is a bit more grey than the rest of them.That cap is a mistake aka ****ed up. Get a replacement.Contacted vendor, can't get individual cap replaced, can only return set as a whole and buy again once re stocked (out of stock now). Kind of bummed since I really wanted the mods, but I do not want to have them with a defective / screwed up cap. Thanks for the quick answer CPTBadAss.Vendor is now letting me return the defective keys and I will receive new ones once they are in stock
Quote from: nickheller on Tue, 22 December 2015, 22:35:38Quote from: CPTBadAss on Tue, 22 December 2015, 22:19:36Quote from: nickheller on Tue, 22 December 2015, 22:08:23I recieved a GMK purple modifier set today, and I can faintly see the "backspace" text on the key, but it is an icon only legend. Is this normal? here is an album I made trying to show this the best I can. I also noticed the "Fn" key legend is a bit more grey than the rest of them.That cap is a mistake aka ****ed up. Get a replacement.Contacted vendor, can't get individual cap replaced, can only return set as a whole and buy again once re stocked (out of stock now). Kind of bummed since I really wanted the mods, but I do not want to have them with a defective / screwed up cap. Thanks for the quick answer CPTBadAss.Vendor is now letting me return the defective keys and I will receive new ones once they are in stockKinda tangential, but did someone re-run the Purple Mod set? O.o