so I've been messing around with my board, took it apart to do indicator LED's cause I originally forgot. when I did this I noticed a small problem, 2 dead RGB led's.. luckily one of them was only slighty messed up one of the 4 leads wasn't soldered on so it wouldn't do green but a quick solder fixed that one.. the other one seems to be stuck doing whatever the hell it wants.. which is sort of a pain and I'd like to replace it.
so @Leeku is there a part number I could order to replace this LED? or what this kind of SMD is it called... just want to make sure I get the right kind. Also are the RGB led's glued to the PCB or something? I tried to desolder it to take it off since it was slightly annoying me but I didn't want to force it off..
Other than that issue loving this board gat blacks are nice and the LED's that do work are great.. going to go to the hardware store and get some shorter bolts so I can lower the angle by taking out a layer of the feet.. I can't stop taking pictures of it cause its so nice!
lastly if anyone is interested I also found in JigOn the Left bottom LED selector corresponds to the LED beside capslock and then left to right then up a row then right to left is all the LED's clockwise in order if that makes sense at all..
Also these are the modes from what I can tell if anyone was wondering.
RGB mode 1 - Snake clockwise
RGB mode 2 - Slow breathing
RGB mode 3 - Slow Fades in and out in order through RGB colours bottom left to right -> top right to left
RGB mode 4 - Fast breathing
RGB mode 5 - Fast mode 3
RGB mode 6 - Solid On