A Man's Gotta Solder....

[tp4tissue]

The G400 Weeaboo-Edition, 5x Omron D2F-01F



In order to solder Omrons onto the mouse, you have to either Glue-it in place, or Tie-it with something to make sure it's flush with the board.... This is necessary on ALL 5 switches of the G400... 



(Twist-tie)

Otherwise it might go in slightly askew, which may affect the durability (of the solder-joint) and more importantly worsen Switch Feel..



Button Flap Modification



Depending on how worn-in your button flaps are, you MAY or MAY NOT need to file the contact surface where the flap hits the switches.

The reason is.. the D2F-01F mounted is about 0.2-0.3mm taller than the D2FC..

So, what happens is, if it's too tight, it will engage on it's own, or refuse to disengage all together.

Generally, it's quite safe to remove ~0.15-0.25mm of material off the button flap contact surface, they're the little H looking pegs on the bottom.

To remove material simply scratch the middle of the H-peg with a flat head screw driver..No need to remove the top plate.. No need to remove material off the Sides of the H peg, as they do not touch the button.

You have to scratch pretty-hard,  but remain cognizant enough not to hurt yourself..

You can not fully tell if the switches are too tight without putting the screws back on..  This will be a short trial and error process.

[demik]

tp, fix that ****ty color man. i can't actively ignore it if i can't see it

[tp4tissue]

tp, fix that ****ty color man. i can't actively ignore it if i can't see it

Maybe I should write an LCD calibration Guide..

[appleonama]

tp, fix that ****ty color man. i can't actively ignore it if i can't see it

Maybe I should write an LCD calibration Guide..

DAM! ) even I felt the heat from that burn.

[demik]

tp, fix that ****ty color man. i can't actively ignore it if i can't see it

Maybe I should write an LCD calibration Guide..

teal or w/e the **** that color is on black on a 7 year old monitor is not fun to read

[tp4tissue]

tp, fix that ****ty color man. i can't actively ignore it if i can't see it

Maybe I should write an LCD calibration Guide..

DAM! ) even I felt the heat from that burn.

Nawh.. it wasn't meant as an insult..

I really think many kidz out there don't got their monitors tuned right..

Accurate calibration is impossible without a probe..

But I can talk you through at least making it LOOK good..

[demik]

tp im getting a new monitor soon, then i'll make u proud and u dont have to be snarky with me OnO

[tp4tissue]

tp im getting a new monitor soon, then i'll make u proud and u dont have to be snarky with me OnO

Are you getting a photo editing monitor or a gaming monitor.

[demik]

tp im getting a new monitor soon, then i'll make u proud and u dont have to be snarky with me OnO

Are you getting a photo editing monitor or a gaming monitor.

for the vidya games.

i dont do any type of photo editing so no need

[appleonama]

tp, fix that ****ty color man. i can't actively ignore it if i can't see it

Maybe I should write an LCD calibration Guide..

DAM! ) even I felt the heat from that burn.

Show Image

Nawh.. it wasn't meant as an insult..

I really think many kidz out there don't got their monitors tuned right..

Accurate calibration is impossible without a probe..

But I can talk you through at least making it LOOK good..

So now calling demik a kid? the disrespect here I didn't know tp was the burn master

[demik]

tp, fix that ****ty color man. i can't actively ignore it if i can't see it

Maybe I should write an LCD calibration Guide..

DAM! ) even I felt the heat from that burn.

Show Image

Nawh.. it wasn't meant as an insult..

I really think many kidz out there don't got their monitors tuned right..

Accurate calibration is impossible without a probe..

But I can talk you through at least making it LOOK good..

So now calling demik a kid? the disrespect here I didn't know tp was the burn master

hey ass, stop egging him on :(

[tp4tissue]

for the vidya games.

i dont do any type of photo editing so no need

What games do you play, what vidya card are you running.

[appleonama]

tp, fix that ****ty color man. i can't actively ignore it if i can't see it

Maybe I should write an LCD calibration Guide..

DAM! ) even I felt the heat from that burn.

Show Image

Nawh.. it wasn't meant as an insult..

I really think many kidz out there don't got their monitors tuned right..

Accurate calibration is impossible without a probe..

But I can talk you through at least making it LOOK good..

So now calling demik a kid? the disrespect here I didn't know tp was the burn master

hey ass, stop egging him on :(

tp is so innocent he wont insult a fly thats why hes the least toxic gh user

[demik]

for the vidya games.

i dont do any type of photo editing so no need

What games do you play, what vidya card are you running.

FPS, mainly CSGO and i have a 970

[tp4tissue]

for the vidya games.

i dont do any type of photo editing so no need

What games do you play, what vidya card are you running.

FPS, mainly CSGO and i have a 970

Do you plan to play it in the competitive sense, 1024x768, minimum graphics settings,

Or,   are you trying to play with all the fidelity settings on @ 4K resolution.

[demik]

for the vidya games.

i dont do any type of photo editing so no need

What games do you play, what vidya card are you running.

FPS, mainly CSGO and i have a 970

Do you plan to play it in the competitive sense, 1024x768, minimum graphics settings,

Or,   are you trying to play with all the fidelity settings on @ 4K resolution.

nah, not competitive just to have fun.

don't really need 4k. 1440 is fine

[tp4tissue]

for the vidya games.

i dont do any type of photo editing so no need

What games do you play, what vidya card are you running.

FPS, mainly CSGO and i have a 970

Do you plan to play it in the competitive sense, 1024x768, minimum graphics settings,

Or,   are you trying to play with all the fidelity settings on @ 4K resolution.

nah, not competitive just to have fun.

don't really need 4k. 1440 is fine

4k blurays incoming at the end of the year..

So if you're gonna buy a monitor TODAY,  I highly recommend going 4K..

I see 65" LG brand TVs 4K for ~ $1000 ...   

That's a pretty good buy.. 


The only real difference between one of those, and a smaller monitor @ the same price, would be "Wide Color Gamut 10-bit processing)"..   

I don't know how much you care about that..  but I personally think 65" is a better buy..

[demik]

i dont want a 65" tv monitor. 27 at the most.

also i dont watch tv really.