Thanks for all the feedback, that's really helpful!
I will declare some details and compromises here, you can skip this if you are not interested.
Layout:
I know a lot of you guys hate those "compatible plates", which full of holes make switches unstable. It is also important to me, I wanna the plate has a minimal cut, make it clean and steady. As other layouts, since this is an integrated plate keyboard, fully customization will probably end up 10+ different version of the top case. That is not affordable.
So, we decide to provide 4 top case versions:
1. Default
2. Blocker Compatible +$20
3. ISO +$20
4. Non-block Compatible +$20
The following picture shows the compatibility of each version and the cutout of the plate.
I realize this can't make everyone happy, but it is the best we can do.
PCB:
After receiving some request for back-lighting, I added an in-switch RGB PCB cost extra $15. The RGB version only supports default layout. You can only choose Multi-compatible PCB if you prefer other layouts.
Both of the PCBs compatible with QMK firmware
Both of them are matte black with gold solder mask
Bottom option:
Sorry for the delay of the brass sample, but we still offer that option. you can either upgrade to the brass bottom slab for extra $50 or have an addition brass bottom for $70. Here are some samples of other brass hardware.
Logo option:
The bottom IC shows that quite a few like the logo but seem to hate the text. I think it's weird simply remove the text. I decide to keep the logo as a default, if you hate it so much you can choose to not have it.
Box
The keyboard will come with a box. Here's a leak:
Rubber feet
The rubber feet will change to following in the final product. I will give some extra both black and grey.
Gap
The Gap between caps and the top case will be smaller in the final product.
Size: 335 × 127 × 33mm
Weight: 1.4kg / 3.1lb default alu case including PCB, switches and SA caps.
front height: 17mm (switches sit 2mm lower)
I put a lot effort to lower the overall height of this keyboard, make it lower than most custom and mass production keyboards. You can see from the picture, Doro with SA caps has the same height as Skog with GMK. I think this will give you a better experience if you prefer high-profile caps.