Author Topic: SELLING OFF KMAC SILVER WINKEY! [Pics are online] (Read 10214 times)

Shadovved · « **on:** Wed, 27 February 2013, 03:27:27 »

Got an KMAC LE silver winkey, stock blues, LED-ed assembled by the godly MMB

~~Something called the LZ-mini, ghetto reds lubed and stickered~~ (sold).

Offers above $400 please

Run into abit of debt in daily life due my sticker production sucking up too much of my liquid assets for materials

PM me please (I need to check your offer as I need to raise quite some money though), I would like to be as flexible as possible........but you can also help me by buying more stickers

https://docs.google.com/a/dhs.sg/spreadsheet/viewform?formkey=dFpjaENGbEZHRXF1N2NvOW1HV21sR3c6MA

LED pics from MMB

citing my source here

Turbo Slaab · « **Reply #1 on:** Wed, 27 February 2013, 04:05:54 »

Good luck buddy!

When you get a chance, I'd like to see the mini.

okooko · « **Reply #2 on:** Wed, 27 February 2013, 04:28:08 »

Quote from: Turbo Slaab on Wed, 27 February 2013, 04:05:54

Good luck buddy!

When you get a chance, I'd like to see the mini.

Likewise, would like to see some pics when your get a chance!

zoolzoo · « **Reply #3 on:** Wed, 27 February 2013, 04:47:27 »

Sorry to hear this :\

Awaiting pics

Shadovved · « **Reply #4 on:** Wed, 27 February 2013, 05:44:18 »

Pics are on. Fire away....... Its like cutting a piece of flesh from me

ARGHHHHHHHHH

Jupiter · « **Reply #5 on:** Wed, 27 February 2013, 06:20:36 »

That mini is beautiful! Around what price range are we looking at here?

Shadovved · « **Reply #6 on:** Wed, 27 February 2013, 06:30:56 »

Quote from: Jupiter on Wed, 27 February 2013, 06:20:36

That mini is beautiful! Around what price range are we looking at here?

Above 400

You have fierce competition

pmh1410 · « **Reply #7 on:** Wed, 27 February 2013, 10:22:33 »

Nice LZ mini, GLWS

Kabuks · « **Reply #8 on:** Wed, 27 February 2013, 10:43:59 »

If the KMAC had red switched I'd be all over it. I have way too many blue switch boards already. GLWS

tjcaustin · « **Reply #9 on:** Wed, 27 February 2013, 10:52:01 »

Mans, I just want that lz mini case.

If someone wants to, I'll put up $150 plus my aluminum/acrylic layered case if they want the pcb/plate/switches.

Acetrak · « **Reply #10 on:** Wed, 27 February 2013, 11:01:23 »

Quote from: tjcaustin on Wed, 27 February 2013, 10:52:01

Mans, I just want that lz mini case.

If someone wants to, I'll put up $150 plus my aluminum/acrylic layered case if they want the pcb/plate/switches.

You'd probably want the plate that matches it right? So it might be easier if you just sell yours as a whole lol

tjcaustin · « **Reply #11 on:** Wed, 27 February 2013, 11:03:17 »

Quote from: Acetrak on Wed, 27 February 2013, 11:01:23

Quote from: tjcaustin on Wed, 27 February 2013, 10:52:01
Mans, I just want that lz mini case.

If someone wants to, I'll put up $150 plus my aluminum/acrylic layered case if they want the pcb/plate/switches.
You'd probably want the plate that matches it right? So it might be easier if you just sell yours as a whole lol

I'm not super worried about seeing letters that I can't see with the spacebar on the board and I would expect that the plates are identical otherwise. They could surprise me, though.

Acetrak · « **Reply #12 on:** Wed, 27 February 2013, 11:06:57 »

The LZ plates might be specific so that only LZMX plates will fit that case

tjcaustin · « **Reply #13 on:** Wed, 27 February 2013, 11:17:59 »

Quote from: Acetrak on Wed, 27 February 2013, 11:06:57

The LZ plates might be specific so that only LZMX plates will fit that case

That's ridiculous, but whatevs.

Don't think I care about a case enough to go through the process of selling a keyboard.

danielucf · « **Reply #14 on:** Wed, 27 February 2013, 13:33:21 »

What are the details of the LZ-mini? It looks like blacks with pink stickers, but are the springs stock or replaced with something else? Are the stems/springs lubed?

Maybe I should sell my MX Mini and buy this one

Anyone want an MX Mini with aluminum top/bottom and acrylic in the middle? MX Blacks and then Clears for escape row and most of the bottom row (Arrow keys excluded). No stickers or lube as far as I know. It also has some sweet LEDs on it, including one on the escape key that changes colors.

Michael · « **Reply #15 on:** Wed, 27 February 2013, 13:39:54 »

Might want to mention the KMAC is an LE, not an original. That point might be important to some

tjcaustin · « **Reply #16 on:** Wed, 27 February 2013, 14:07:58 »

Quote from: danielucf on Wed, 27 February 2013, 13:33:21

What are the details of the LZ-mini? It looks like blacks with pink stickers, but are the springs stock or replaced with something else? Are the stems/springs lubed?

Maybe I should sell my MX Mini and buy this one Anyone want an MX Mini with aluminum top/bottom and acrylic in the middle? MX Blacks and then Clears for escape row and most of the bottom row (Arrow keys excluded). No stickers or lube as far as I know. It also has some sweet LEDs on it, including one on the escape key that changes colors.

Quote from: Shadovved on Wed, 27 February 2013, 03:27:27

Something called the LZ-mini, ghetto reds lubed and stickered.

There's this one and the preorder of boost's up right now and I'm having questions now on if an aluminum case is worth the hassle of keyboard selling.

akuJIWA · « **Reply #17 on:** Wed, 27 February 2013, 16:45:39 »

Hopefully you're doing good, I am in some **** myself. Good luck.

Jupiter · « **Reply #18 on:** Wed, 27 February 2013, 16:47:30 »

Quote from: tjcaustin on Wed, 27 February 2013, 10:52:01

Mans, I just want that lz mini case.

If someone wants to, I'll put up $150 plus my aluminum/acrylic layered case if they want the pcb/plate/switches.

Hmmm what case are you talking about?

L4yercake · « **Reply #19 on:** Wed, 27 February 2013, 16:53:35 »

PM'd my man, I would love a Mini as a dedicated gaming board.

Shadovved · « **Reply #20 on:** Wed, 27 February 2013, 17:23:15 »

Quote from: Bro Caps on Wed, 27 February 2013, 13:39:54

Might want to mention the KMAC is an LE, not an original. That point might be important to some

Dont think its an LE? I was told its a KMAC

Kabuks · « **Reply #21 on:** Wed, 27 February 2013, 17:25:17 »

You should add what colors the LED's are on the function row and WASD for the KMAC.

Shadovved · « **Reply #22 on:** Wed, 27 February 2013, 17:32:06 »

Quote from: Kabuks on Wed, 27 February 2013, 17:25:17

You should add what colors the LED's are on the function row and WASD for the KMAC.

Ah, right, lemme go put it on power and show the LEDs

later when I get homr

Michael · « **Reply #23 on:** Wed, 27 February 2013, 17:37:44 »

Quote from: Shadovved on Wed, 27 February 2013, 17:23:15

Quote from: Bro Caps on Wed, 27 February 2013, 13:39:54
Might want to mention the KMAC is an LE, not an original. That point might be important to some

Dont think its an LE? I was told its a KMAC

Look at the PCB

zoolzoo · « **Reply #24 on:** Wed, 27 February 2013, 18:26:02 »

$401.00 is my bid for the LZ MX.

guilleguillaume · « **Reply #25 on:** Wed, 27 February 2013, 21:30:36 »

Quote from: zoolzoo on Wed, 27 February 2013, 18:26:02

$401.00 is my bid for the LZ MX.

I don't understand this as an auction but offers trough PM.

You offer him +400$ and he will decide if the price is OK with what he needs for it.

I'm so tempted by the LZ-Mini...I shouldn't...

Kabuks · « **Reply #26 on:** Wed, 27 February 2013, 21:37:22 »

This isn't an auction. The OP is just asking for reasonable offers through pm and if your gonna offer less than $400 then don't bother pming... at least that is what I assume is what he is suggesting in the first post.

Shadovved · « **Reply #27 on:** Wed, 27 February 2013, 23:01:52 »

Quote from: Kabuks on Wed, 27 February 2013, 21:37:22

This isn't an auction. The OP is just asking for reasonable offers through pm and if your gonna offer less than $400 then don't bother pming... at least that is what I assume is what he is suggesting in the first post.

I am exactly suggesting that

Quote from: Bro Caps on Wed, 27 February 2013, 17:37:44

Quote from: Shadovved on Wed, 27 February 2013, 17:23:15
Quote from: Bro Caps on Wed, 27 February 2013, 13:39:54
Might want to mention the KMAC is an LE, not an original. That point might be important to some

Dont think its an LE? I was told its a KMAC

Look at the PCB

I'll put it as the LE atm, since im sure you assembled it knowing better than me, but I'll double check later still

missalaire · « **Reply #28 on:** Wed, 27 February 2013, 23:06:12 »

Quote from: tjcaustin on Wed, 27 February 2013, 10:52:01

Mans, I just want that lz mini case.

If someone wants to, I'll put up $150 plus my aluminum/acrylic layered case if they want the pcb/plate/switches.

Is it the Vortex aluminum case?

Acetrak · « **Reply #29 on:** Wed, 27 February 2013, 23:09:26 »

No I think tj's case is a case dedicated to house mx minis

Shadovved · « **Reply #30 on:** Wed, 27 February 2013, 23:13:29 »

Quote from: Acetrak on Wed, 27 February 2013, 23:09:26

No I think tj's case is a case dedicated to house mx minis

Yes its the LZ case for MX mini's with the LZ switch swapping plate

EDIT: I meant my case.....

leesofi · « **Reply #31 on:** Wed, 27 February 2013, 23:19:01 »

Shadovved · « **Reply #32 on:** Wed, 27 February 2013, 23:21:25 »

Quote from: leesofi on Wed, 27 February 2013, 23:19:01

GLWS

Yea man, you too, for your MX mini!

Love that orange!

Shadovved · « **Reply #33 on:** Wed, 27 February 2013, 23:45:35 »

LZ is pending

Sai · « **Reply #34 on:** Wed, 27 February 2013, 23:54:22 »

Quote from: Shadovved on Wed, 27 February 2013, 23:45:35

LZ is pending

told you bro. these won't take long.

Shadovved · « **Reply #35 on:** Thu, 28 February 2013, 01:11:43 »

LZ mini sold, sorry people

Shadovved · « **Reply #36 on:** Thu, 28 February 2013, 01:12:16 »

Quote from: hoshidishi on Wed, 27 February 2013, 23:54:22

Quote from: Shadovved on Wed, 27 February 2013, 23:45:35
LZ is pending

told you bro. these won't take long.

Need the KMAC gone too! Only paid around 60% of my crisis!

Sai · « **Reply #37 on:** Thu, 28 February 2013, 01:13:59 »

Quote from: Shadovved on Thu, 28 February 2013, 01:12:16

Quote from: hoshidishi on Wed, 27 February 2013, 23:54:22
Quote from: Shadovved on Wed, 27 February 2013, 23:45:35
LZ is pending

told you bro. these won't take long.

Need the KMAC gone too! Only paid around 60% of my crisis!

Shadovved · « **Reply #38 on:** Thu, 28 February 2013, 01:16:27 »

Well, my crisis is urgent

tp4tissue · « **Reply #39 on:** Thu, 28 February 2013, 05:09:15 »

Could we get some more "high res" close ups on that Kmac..

And what is the difference between KMAC and KMAC-LE

Shadovved · « **Reply #40 on:** Thu, 28 February 2013, 06:43:52 »

Quote from: tp4tissue on Thu, 28 February 2013, 05:09:15

Could we get some more "high res" close ups on that Kmac..

And what is the difference between KMAC and KMAC-LE

Tell me which places you need closeups of and I'll do it tmr.......

LED pics from MMB when he showed me his handiwork added

inteli722 · « **Reply #41 on:** Thu, 28 February 2013, 07:51:01 »

The one thing I want is the one thing I can't have...that KMAC!

I want it...but I'm broke...

GLWS! Congrats to whoever gets that KMAC.

llovro · « **Reply #42 on:** Thu, 28 February 2013, 08:36:08 »

Quote from: tp4tissue on Thu, 28 February 2013, 05:09:15

Could we get some more "high res" close ups on that Kmac..

And what is the difference between KMAC and KMAC-LE

KMAC-LE has different colour case. I mean, top part of the case is different colour than bottom part. I think. Correct me if I'm wrong.

alaricljs · « **Reply #43 on:** Thu, 28 February 2013, 08:37:31 »

My understanding of the situation with KMAC LE is that it was the result of poor anodizing results (top not matching bottom perfectly) on the first attempt. They decided they wanted better and so they ran a set of PCBs specifically for the poorly anodized cases and called it "LE".

Acetrak · « **Reply #44 on:** Thu, 28 February 2013, 08:45:26 »

The PCB's also have "KMAC LE" printed on them

Michael · « **Reply #45 on:** Thu, 28 February 2013, 10:26:36 »

Quote from: alaricljs on Thu, 28 February 2013, 08:37:31

My understanding of the situation with KMAC LE is that it was the result of poor anodizing results (top not matching bottom perfectly) on the first attempt. They decided they wanted better and so they ran a set of PCBs specifically for the poorly anodized cases and called it "LE".

KMAC LE PCB also did not include resistors, as the original came with them from the factory.

AKIMbO · « **Reply #46 on:** Thu, 28 February 2013, 10:31:56 »

Does that KMAC have a normal 1.25 layout?

Shadovved · « **Reply #47 on:** Thu, 28 February 2013, 20:53:57 »

Quote from: AKIMbO on Thu, 28 February 2013, 10:31:56

Does that KMAC have a normal 1.25 layout?

Yes, the 1.25x mods

Shadovved · « **Reply #48 on:** Thu, 28 February 2013, 23:47:52 »

Need to resolve the other 40% of my crisis! SOMEONE TAKE IT PLEASE!

balanar · « **Reply #49 on:** Fri, 01 March 2013, 04:06:45 »

You gotta do an irresistible deal if you want it to sell quick man!

News:

Author Topic: SELLING OFF KMAC SILVER WINKEY! [Pics are online] (Read 10214 times)