Author Topic: [IC]Volcano660, Gasket Mount Keyboard(Half a year, FINALLY, GB is Live!)  (Read 49630 times)

4h0 and 4 Guests are viewing this topic.

Offline edasaur

  • Posts: 42
  • Location: US
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #150 on: Fri, 09 November 2018, 12:21:08 »
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
It will be a FCFS for the 50units till further stated by ilouis_07, and raffles for the limited quantity PC/Brass kits.
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
Would also like to know this. I was gonna buy a KOYU but this talked me out of it.

Sent from my SAMSUNG-SM-G930A using Tapatalk
What's a KOYU?

Sent from my G8142 using Tapatalk
https://rama.works/koyu/

I think

Sent from my Pixel 2 XL using Tapatalk


Offline Starston3

  • Posts: 194
  • Location: Bay Area
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #151 on: Fri, 09 November 2018, 12:23:37 »
We are hoping get some anodized colour samples from the factory. These would be to test the accuracy of anodizing of colours and are not the finalised colours of the Volcano660
That Sailor Blue

Offline Geckt

  • Posts: 191
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #152 on: Fri, 09 November 2018, 18:51:35 »
@edasaur you're quoting an already edited and corrected reply, but, yes thank you for the link to KOYU.

Sent from my G8142 using Tapatalk


Offline edasaur

  • Posts: 42
  • Location: US
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #153 on: Fri, 09 November 2018, 18:53:10 »
@edasaur you're quoting an already edited and corrected reply, but, yes thank you for the link to KOYU.

Sent from my G8142 using Tapatalk
oops my bad. didn't see the update when I replied xD

Sent from my Pixel 2 XL using Tapatalk


Offline 8six753o9

  • Posts: 115
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #154 on: Fri, 09 November 2018, 18:57:28 »
We are hoping get some anodized colour samples from the factory. These would be to test the accuracy of anodizing of colours and are not the finalised colours of the Volcano660

Awww no hot lava red?


Sent from my iPhone using Tapatalk

Offline Geckt

  • Posts: 191
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #155 on: Fri, 09 November 2018, 19:08:27 »
@edasaur you're quoting an already edited and corrected reply, but, yes thank you for the link to KOYU.

Sent from my G8142 using Tapatalk
oops my bad. didn't see the update when I replied xD

Sent from my Pixel 2 XL using Tapatalk
Hey not a problem, **** happens. :X

Sent from my G8142 using Tapatalk


Offline Geckt

  • Posts: 191
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #156 on: Fri, 09 November 2018, 19:09:42 »
We are hoping get some anodized colour samples from the factory. These would be to test the accuracy of anodizing of colours and are not the finalised colours of the Volcano660

Awww no hot lava red?


Sent from my iPhone using Tapatalk
These are just tests, no confirmation on any colors yet. Chin up buddy!

Sent from my G8142 using Tapatalk


Offline Eri Kasamoto

  • Posts: 10
Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
« Reply #157 on: Sat, 10 November 2018, 20:24:05 »
price est on the full brass version?
Before the GB i will announce it, thanks:)

kailh hotswap sockets yay or nay?

I will also say Yes! Hot swappability seems to be all the rage now, and for good reason.

But since OP doesn't agree, we probably won't be seeing it(at least in this version).

I guess there are many purists huh.😅

Offline ilouis_07

  • Thread Starter
  • Posts: 594
  • Location: Singapore
  • 不忘初心
    • iLuMKB
Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
« Reply #158 on: Sat, 10 November 2018, 22:37:56 »
price est on the full brass version?
Before the GB i will announce it, thanks:)

kailh hotswap sockets yay or nay?

I will also say Yes! Hot swappability seems to be all the rage now, and for good reason.

But since OP doesn't agree, we probably won't be seeing it(at least in this version).

I guess there are many purists huh.😅
Hey, gasket mount a bit hard to do hot swap pcb imo.(unless i add some screws to fixed pcb on plate, maybe next time on other design i will try it:)

Offline Kasterborous

  • Posts: 18
  • Location: Singapore
Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
« Reply #159 on: Sun, 11 November 2018, 03:50:16 »
We are hoping get some anodized colour samples from the factory. These would be to test the accuracy of anodizing of colours and are not the finalised colours of the Volcano660

Those colors are freaking awesome :D


Offline nulltorious

  • Posts: 74
  • Location: Bangkok
Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
« Reply #160 on: Sun, 11 November 2018, 04:06:12 »
Agreed. I hope the finalized option will include a red or rose gold color. I'm looking for something to put GMK Olivia on ;)
« Last Edit: Sun, 11 November 2018, 07:13:28 by nulltorious »

Offline Eri Kasamoto

  • Posts: 10
Re: [IC]Volcano660, Gasket Mount Keyboard(Type C is updated!!!2rd/Nov)
« Reply #161 on: Sun, 11 November 2018, 07:34:37 »
price est on the full brass version?
Before the GB i will announce it, thanks:)

kailh hotswap sockets yay or nay?

I will also say Yes! Hot swappability seems to be all the rage now, and for good reason.

But since OP doesn't agree, we probably won't be seeing it(at least in this version).

I guess there are many purists huh.😅
Hey, gasket mount a bit hard to do hot swap pcb imo.(unless i add some screws to fixed pcb on plate, maybe next time on other design i will try it:)

Glad to hear that, means we will still be seeing some future iterations of the Volcano.😁

Also, saw the update regarding the cost. Hopefully the new PCB will not push the price point past the Koyu, as (IMHO) I felt that one of the main attractions of this keyboard was its relatively affordable price.

Offline missylo

  • Posts: 43
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #162 on: Sun, 11 November 2018, 08:58:05 »
We are hoping get some anodized colour samples from the factory. These would be to test the accuracy of anodizing of colours and are not the finalised colours of the Volcano660

Awww no hot lava red?


Sent from my iPhone using Tapatalk

Hahha like the pun there


Sent from my iPhone using Tapatalk

Offline missylo

  • Posts: 43
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #163 on: Sun, 11 November 2018, 09:00:06 »
Gasket? Sounds interesting

there are a couple of links in the OP to more info about gaskets


Sent from my iPhone using Tapatalk

Offline lundmore

  • Posts: 17
  • Location: Australia
Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
« Reply #164 on: Sun, 11 November 2018, 17:11:35 »
Wait why it is curved?

Show Image

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

Offline TheMastermind

  • Posts: 57
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #165 on: Mon, 12 November 2018, 01:52:25 »
Wait I'm confused, does this mean the "open slots" stated mean that they're only 50 boards going to be made or that 50 boards will need to be bought to start making the rest?
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
It will be a FCFS for the 50units till further stated by ilouis_07, and raffles for the limited quantity PC/Brass kits.
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
Would also like to know this. I was gonna buy a KOYU but this talked me out of it.

Sent from my SAMSUNG-SM-G930A using Tapatalk
What's a KOYU?

Sent from my G8142 using Tapatalk
https://rama.works/koyu/

I think

Sent from my Pixel 2 XL using Tapatalk

Offline Geckt

  • Posts: 191
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #166 on: Tue, 13 November 2018, 07:03:25 »
Wait I'm confused, does this mean the "open slots" stated mean that they're only 50 boards going to be made or that 50 boards will need to be bought to start making the rest?
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
It will be a FCFS for the 50units till further stated by ilouis_07, and raffles for the limited quantity PC/Brass kits.
I don't know if it has already been asked but is the GB FCFS or a limited time frame? If it's the latter count me in!
Would also like to know this. I was gonna buy a KOYU but this talked me out of it.

Sent from my SAMSUNG-SM-G930A using Tapatalk
What's a KOYU?

Sent from my G8142 using Tapatalk
https://rama.works/koyu/

I think

Sent from my Pixel 2 XL using Tapatalk
Actually to simplify things, it means there's a minimum MoQ to fulfill. Details will be clearer when the GB starts, the buy has yet to be give a launch date yet and the figures aren't confirmed. So sit tight. ;)

Sent from my G8142 using Tapatalk


Offline Eri Kasamoto

  • Posts: 10
Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
« Reply #167 on: Tue, 13 November 2018, 07:36:42 »
Wait why it is curved?

Show Image

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.😎

Offline lundmore

  • Posts: 17
  • Location: Australia
Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
« Reply #168 on: Tue, 13 November 2018, 15:41:44 »
Wait why it is curved?

Show Image

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.😎

I totally agree. I think it will be more of a stand out if it had a subtle curve, too many keyboards are a basic wedge which isn't necessarily a bad thing but if he's dabbling with introducing a curve I say go for it!

Offline ilouis_07

  • Thread Starter
  • Posts: 594
  • Location: Singapore
  • 不忘初心
    • iLuMKB
Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
« Reply #169 on: Wed, 14 November 2018, 02:46:32 »
Wait why it is curved?

Show Image

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.😎
inspired curve top from HHKB and it won't be aggressive, we make sure that it won't expose the switch(with cherry keycap) from side angle.

Offline longsock

  • Posts: 16
  • Location: Norway
  • goth boi clique
Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
« Reply #170 on: Wed, 14 November 2018, 03:15:49 »
Wait why it is curved?

Show Image

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.😎
inspired curve top from HHKB and it won't be aggressive, we make sure that it won't expose the switch(with cherry keycap) from side angle.

I would look perfect if you could match it up with the minimal curve the HHKB has. Would give it a more unique visual compared to the keyboards on the market right now. NGL, I didn't really notice that the HHKB had that very subtle curve, great idea!
hhkb loser

Offline _ODIN_

  • Posts: 595
Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
« Reply #171 on: Wed, 14 November 2018, 03:58:38 »
Wait why it is curved?

Show Image

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.
inspired curve top from HHKB and it won't be aggressive, we make sure that it won't expose the switch(with cherry keycap) from side angle.

I would look perfect if you could match it up with the minimal curve the HHKB has. Would give it a more unique visual compared to the keyboards on the market right now. NGL, I didn't really notice that the HHKB had that very subtle curve, great idea!
it has to be very subtle imo

Offline longsock

  • Posts: 16
  • Location: Norway
  • goth boi clique
Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
« Reply #172 on: Wed, 14 November 2018, 04:39:12 »
Wait why it is curved?

Show Image

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.
inspired curve top from HHKB and it won't be aggressive, we make sure that it won't expose the switch(with cherry keycap) from side angle.

I would look perfect if you could match it up with the minimal curve the HHKB has. Would give it a more unique visual compared to the keyboards on the market right now. NGL, I didn't really notice that the HHKB had that very subtle curve, great idea!
it has to be very subtle imo

It is very subtle though, I'll attach a picture to show you - and if the V66 ends up having the same curve it wouldn't be any issues tbh.

hhkb loser

Offline _ODIN_

  • Posts: 595
Re: [IC]Volcano660, Gasket Mount Keyboard(updated new design)
« Reply #173 on: Wed, 14 November 2018, 04:45:16 »
Wait why it is curved?

Show Image

yup but it is just prototype drawing. i'll see how the responses like and make my choice.

Curve curve curve!

The subtle curve shouldn't make a difference. But I get OP's idea, it will be something like model M keyboards. Not sure how that will feel like to type on, but I think many people like the curve on the model M.

One thing to note, hopefully the curve is not too aggressive, as that will expose the switch if Cherry Profile keycaps are used. IMHO, a high profile case is preferred where the switches are concealed. Looks cleaner.
inspired curve top from HHKB and it won't be aggressive, we make sure that it won't expose the switch(with cherry keycap) from side angle.

I would look perfect if you could match it up with the minimal curve the HHKB has. Would give it a more unique visual compared to the keyboards on the market right now. NGL, I didn't really notice that the HHKB had that very subtle curve, great idea!
it has to be very subtle imo

It is very subtle though, I'll attach a picture to show you - and if the V66 ends up having the same curve it wouldn't be any issues tbh.

Show Image

:thumb:

Offline ilouis_07

  • Thread Starter
  • Posts: 594
  • Location: Singapore
  • 不忘初心
    • iLuMKB
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #174 on: Wed, 14 November 2018, 07:09:58 »
the radius of the curve will be 1150 mm. It is quite subtle imo:)

Offline mikenogo

  • Posts: 118
  • Location: Canada, ON
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #175 on: Wed, 14 November 2018, 13:00:15 »
Why no rose gold color? D:

Offline KaosJ

  • Posts: 886
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #176 on: Wed, 14 November 2018, 13:09:40 »
Why no rose gold color? D:

No girls allowed, neither the famous bearded girls

Offline V. Vega

  • Posts: 65
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #177 on: Wed, 14 November 2018, 13:13:36 »
Why no rose gold color? D:
I was hoping for rose gold too, or a nice pastel purple.

Offline _ODIN_

  • Posts: 595
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #178 on: Wed, 14 November 2018, 13:23:29 »
I would love to see a dark green

Gesendet von meinem H8416 mit Tapatalk


Offline The_judge_168

  • Posts: 234
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #179 on: Wed, 14 November 2018, 16:18:38 »
I would love to see a dark green

Gesendet von meinem H8416 mit Tapatalk

Always intersted in green!

Online Mcnos

  • Posts: 600
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #180 on: Wed, 14 November 2018, 18:25:51 »
I'm a simple person, gray.
Once a set shines, it is truly yours. It is then your job to nurture it and care for it.
Love it until it blossoms into the beautiful fully and evenly shined set it has always wanted to be since it saw a shined set on Instagram under the hashtag #perfection.
Support it and maintain it until it will grow into itself and become one with itself. Then you can truly enjoy the typing experience
Sincerely,
       Hineybush

TGR910 | TGR Jane V2 | White E6.5 | PC E6.5 | Gray HHKB Polaris | Duck Viper V2 | HHKB | KBD67 | E6V2 | Sakura Kyuu | Fanoe | WKL Tofu | KBD 8X | Mech27v2 | Tada68 | KBD5 | FC660M | Fjell | FC660CClueboard | X60 WKL & HHKB | Noxary 268 | AEK64 Brown Alps | KBD8X | HHKB Tofu | DC60 | Percent Canoe | YMD96 | QXP

Offline ilouis_07

  • Thread Starter
  • Posts: 594
  • Location: Singapore
  • 不忘初心
    • iLuMKB
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #181 on: Thu, 15 November 2018, 00:19:31 »
I would love to see a dark green

Gesendet von meinem H8416 mit Tapatalk
Dark green is nice, will have!

Offline _ODIN_

  • Posts: 595
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #182 on: Thu, 15 November 2018, 00:25:50 »
I would love to see a dark green

Gesendet von meinem H8416 mit Tapatalk
Dark green is nice, will have!
Amazing

Gesendet von meinem H8416 mit Tapatalk


Offline ilouis_07

  • Thread Starter
  • Posts: 594
  • Location: Singapore
  • 不忘初心
    • iLuMKB
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #183 on: Thu, 15 November 2018, 00:29:15 »
I would love to see a dark green

Gesendet von meinem H8416 mit Tapatalk
Dark green is nice, will have!
Amazing

Gesendet von meinem H8416 mit Tapatalk
Actually i submitted Pantone Black 3 C to factory and asked them to do a sample for me. imo, it is very dark greenish black.(or blackish green:P)

Offline Geckt

  • Posts: 191
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #184 on: Thu, 15 November 2018, 03:21:07 »
Why no rose gold color? D:

No girls allowed, neither the famous bearded girls
Roflmao... Hey.... We're not sure about that one since there is a color we're interested in trying and that is "Salmon Pink"

Sent from my G8142 using Tapatalk


Offline Geckt

  • Posts: 191
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #185 on: Thu, 15 November 2018, 03:22:09 »
I'm a simple person, gray.
I liked your choice. Would be fantastic with the Artic or Hyperfuse set.

Sent from my G8142 using Tapatalk


Offline missylo

  • Posts: 43
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #186 on: Thu, 15 November 2018, 09:42:43 »
Why no rose gold color? D:

No girls allowed, neither the famous bearded girls

« Last Edit: Thu, 15 November 2018, 09:51:19 by missylo »

Offline missylo

  • Posts: 43
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #187 on: Thu, 15 November 2018, 09:45:15 »
Why no rose gold color? D:

No girls allowed, neither the famous bearded girls


booooo. What are you going on about? Girls rock. As for bearded girls - this is me!!!!

Offline Eri Kasamoto

  • Posts: 10
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #188 on: Fri, 16 November 2018, 01:44:44 »
the radius of the curve will be 1150 mm. It is quite subtle imo:)

Curve looks nice and gentle.😊

Good to have a confirmation that it will cover Cherry Profile.

Offline ilouis_07

  • Thread Starter
  • Posts: 594
  • Location: Singapore
  • 不忘初心
    • iLuMKB
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #189 on: Fri, 16 November 2018, 01:46:46 »
the radius of the curve will be 1150 mm. It is quite subtle imo:)

Curve looks nice and gentle.😊

Good to have a confirmation that it will cover Cherry Profile.
Yes, it will cover!

Offline TheMastermind

  • Posts: 57
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #190 on: Fri, 16 November 2018, 07:40:01 »
I noticed in the pictures that the bottom row shows a 6u spacebar. Is this the final layout or will it support something more widespread like a 6.25u space?

Offline _ODIN_

  • Posts: 595
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #191 on: Fri, 16 November 2018, 08:58:19 »
I noticed in the pictures that the bottom row shows a 6u spacebar. Is this the final layout or will it support something more widespread like a 6.25u space?
Or even 7u

Gesendet von meinem H8416 mit Tapatalk


Offline ilouis_07

  • Thread Starter
  • Posts: 594
  • Location: Singapore
  • 不忘初心
    • iLuMKB
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #192 on: Fri, 16 November 2018, 09:23:48 »
I noticed in the pictures that the bottom row shows a 6u spacebar. Is this the final layout or will it support something more widespread like a 6.25u space?
Hey! Since clueboard is my partner, so i just using clueboard 66% pcb to show all the compatible layouts.

(Reference Link:https://clueboard.co/parts/clueboard-66-pcb-25, and thanks skully for the great layouts provided)

Offline Dovan1405

  • Posts: 46
  • Location: Bedok
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #193 on: Sat, 17 November 2018, 10:46:15 »
Me like gib gib


Sent from my iPhone using Tapatalk

Offline quinnx

  • Posts: 13
  • Location: Canada
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #194 on: Sat, 17 November 2018, 12:32:09 »
I was so dig clueboard design and capability. Love that they join v660!. I really want to buy my endgame keep now  :p

Offline _ODIN_

  • Posts: 595
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #195 on: Sat, 17 November 2018, 12:49:11 »
I think I will try a 6u space bar with this board for the first time. The symmetry of the bottom row is amazing.

Gesendet von meinem H8416 mit Tapatalk


Offline TheMastermind

  • Posts: 57
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #196 on: Sat, 17 November 2018, 13:21:47 »
I think I will try a 6u space bar with this board for the first time. The symmetry of the bottom row is amazing.

Gesendet von meinem H8416 mit Tapatalk
Good luck finding any 6u stabs unless you're willing to make one.

Offline _ODIN_

  • Posts: 595
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #197 on: Sat, 17 November 2018, 13:23:28 »
I think I will try a 6u space bar with this board for the first time. The symmetry of the bottom row is amazing.

Gesendet von meinem H8416 mit Tapatalk
Good luck finding any 6u stabs unless you're willing to make one.
Really? I thought the normal one would fit :-\

Offline _ODIN_

  • Posts: 595
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #198 on: Sat, 17 November 2018, 18:27:50 »
I don't know if people are interested in it but a bronze/ copper color for the case would be amazing too.

Offline Abec13

  • Posts: 105
Re: [IC]Volcano660, Gasket Mount Keyboard(Change in PCB and Colors /Nov 10)
« Reply #199 on: Sun, 18 November 2018, 12:36:43 »
God I'm so excited for this guy. Heavy, 66%, Gasket mount... I just hope that since the PCB will be from clueboard, that getting extras won't be hard. USB-C or Mini, do you think?
KBD19X | Minivan | Volcano 660 PC | Think 6.5