Though I'd share my ErgoDox build:
Mostly done, a couple of things left here and there
Covers on:
Covers off:
I decided to swap the position of the resistors and the LEDs since, the keys were not going to be programmed Caps/Num/Scroll Lock, and thus having LED in that position didn't make sense. Since there wasn't enough space for the resistors in place of LED (Which would have gone through the switch), I decided to just use some SMD resistors.
Side profile, I made these feet to adjust the vertical angle of the ErgoDox to make it even more comfortable. Got various sized discs and different sized hex bolts and then balanced it out according to my comfort level. You can see that on each hand, I am missing one bumpon on one feet, the ebay dealer only sent two sets of 4 instead of 3
:
On the todo list (In order of priority):
- Add the missing bumper to one feet on each side (Priority, should be done in next couple of days as soon as Ebay dealer ships it)
- Braided USB cable, awaiting order of USB and mini-USB ends (Shipped, yet to receive)
- Swap out the 2x keys for taller SA profile keycaps, (Shipped, yet to receive)
- Change the switch top covers to clear switch top covers (Still waiting for them to be shipped)
- Add a chainmaille armor style sleeving to both the cables (Planning phase)